Subscribe Now Subscribe Today
Science Alert
 
FOLLOW US:     Facebook     Twitter
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2007 | Volume: 7 | Issue: 19 | Page No.: 2871-2875
DOI: 10.3923/jas.2007.2871.2875
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail
The Effect of Corner Radii and Part Orientation on Fatigue Life of Closed-Forging Die
A.B. Abdullah, K.S. Ling, Z. Samad and S. Sahudin

Abstract:
An approach to optimal design of cold forging die is presented in this paper. The closed forging of the Universal joint was generated using three-dimensional CAD modeling software namely Solid works and analysis of stress and fatigue life were carried out. This study focused on the effects of corner radius of the die and part orientations to fatigue life of the die. The forging load is obtained by using Simplified Slab Method. The result indicate that corner radius and part orientation gives significant effect to reduction of stress on the die, thus increase the service life of the die.
PDF Fulltext XML References Citation Report Citation
How to cite this article:

A.B. Abdullah, K.S. Ling, Z. Samad and S. Sahudin, 2007. The Effect of Corner Radii and Part Orientation on Fatigue Life of Closed-Forging Die. Journal of Applied Sciences, 7: 2871-2875.

DOI: 10.3923/jas.2007.2871.2875

URL: https://scialert.net/abstract/?doi=jas.2007.2871.2875

 
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

       

       

Curve Bottom