Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2007 | Volume: 7 | Issue: 17 | Page No.: 2509-2513
DOI: 10.3923/jas.2007.2509.2513
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Empirical Modeling of Surface Roughness in turning process of 1060 steel using Factorial Design Methodology

A. Doniavi, M. Eskandarzade and M. Tahmasebian

Abstract:
Surface quality is of great importance for the functional behavior of mechanical parts. Surface roughness in addition to tolerances imposes one of the most critical constrains for cutting parameters selection in manufacturing process planning. Productivity for the finish turning can be improved by optimal selection of related parameters. The attempt of this study is to develop an imperial model with the use of response surface methodology that is widely adapted tool for the quality engineering field. The established predictive model shows that the feed rate was found to be main influencing factor on the surface roughness. It is increased with increasing the feed rate. But decrease with increasing cutting speed. The results for analysis of variance show that the first order term of depth of cut is not significant. But the first order term of cutting speed and feed rate are significant.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Energy Cost Modeling for High Speed Hard Turning
  •    Response Surface Methodology Approach to Optimizing Process Variables for the Densification of Rice Straw as a Rural Alternative Solid Fuel
  •    Workpiece Surface Temperature for In-process Surface Roughness Prediction using Response Surface Methodology
How to cite this article:

A. Doniavi, M. Eskandarzade and M. Tahmasebian , 2007. Empirical Modeling of Surface Roughness in turning process of 1060 steel using Factorial Design Methodology. Journal of Applied Sciences, 7: 2509-2513.

DOI: 10.3923/jas.2007.2509.2513

URL: https://scialert.net/abstract/?doi=jas.2007.2509.2513

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom