
	Journal of Applied Sciences
	Year: 2011 \| Volume: 11 \| Issue: 2 \| Page No.: 308-315 DOI: 10.3923/jas.2011.308.315

Workpiece Surface Temperature for In-process Surface Roughness Prediction using Response Surface Methodology

Adeel H. Suhail, N. Ismail, S.V. Wong and N.A. Abdul Jalil

Abstract: As manufacturing technology has been moving to the stage of full automation over the years, one of the fundamental requirements is the ability to accurately predict the output performance of machining processes. The focus of present study is to predict surface roughness using the workpiece surface temperature of a turning workpiece with the aid of an infrared temperature sensor. Relationship between the workpiece surface temperature and the cutting parameters and also between the surface roughness and cutting parameters were found out for indirect measurement of surface roughness through the surface temperature of the workpiece. A 3³ full factorial design was used in order to get the output data uniformly distributed all over the ranges of the input parameters. Response Surface Method (RSM) and analysis of variance (ANOVA) are used to get the relation between different response variables (Surface roughness and workpiece surface temperature) and the input parameters (speed, feed and depth of cut). Based on variance analysis for the second order RSM model, most influential design variable is feed rate and depth of cut on surface roughness and workpiece surface temperature respectively and the experimental results show that the workpiece surface temperature can be sensed and used effectively as an indicator of the cutting performance.

PDF Fulltext XML References Citation Report Citation

RELATED ARTICLES:

•	Structural Parameter Optimization for 3-DOF Spherical Parallel Mechanism, Binocular Stereo

•	Development of Surface Roughness Prediction Model for High Speed End Milling of Hardened Tool Steel

•	Energy Cost Modeling for High Speed Hard Turning

•	Empirical Modeling of Surface Roughness in turning process of 1060 steel using Factorial Design Methodology

How to cite this article:

Adeel H. Suhail, N. Ismail, S.V. Wong and N.A. Abdul Jalil, 2011. Workpiece Surface Temperature for In-process Surface Roughness Prediction using Response Surface Methodology. Journal of Applied Sciences, 11: 308-315.

DOI: 10.3923/jas.2011.308.315

URL: https://scialert.net/abstract/?doi=jas.2011.308.315

COMMENT ON THIS PAPER

Navigation


		Online First
		Current Issue
		Previous Issues
		Editorial Board
		Submit a Manuscript
		Guide to Authors
		Subscribe to E-alerts

Indexed In


		AGRIS
		ASCI-Database
		Asian Digital Library
		Chemical Abstract Services
		Google Scholar

Science Alert