Subscribe Now Subscribe Today
Science Alert
 
FOLLOW US:     Facebook     Twitter
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2012 | Volume: 12 | Issue: 7 | Page No.: 612-626
DOI: 10.3923/jas.2012.612.626
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail
Development of Stand Alone Application Tool for Analyzing and Reporting Weld Imperfection Captured by μ-focussed Digital Radiography using MATLAB-based GUI
Yupiter HP Manurung, M.Z. Puteri Zirwatul Nadila, Suhaila Abd Halim, Sunhaji Kiyai Abas, Ghalib Tham, Esa Haruman and Zulfahmy Awaldin

Abstract:
As an inspection method, new technology using μ-focused digital radiography is nowadays increasingly used in welding or fabrication industry. Compared to film based radiography, digital image can be acquired with high time efficiency and less radiation. However, noises can easily occur due to the system complexity, parameters sensitivity and environmental effect which can indicate low quality image and can result in difficulty for interpretation. Therefore, a need of an application tool which can improve, analyze and record the image is becoming an urgent task. In this research, an interactive and user-friendly application tool was developed containing important components which can be needed by interpreter or operator to analyze the defects and to record the results. This tool is divided into three important parts, namely: Image Processing Method (IPM), Image Quality Measurement (IQM) method and Radiographic Inspection Report (RIR). This application tool was written by using MATLAB’s image processing tool which is further followed by a compilation process using GUIDE toolbox in MATLAB to build a WINDOWS stand-alone application which allows to be executed at any computer without the installation of MATLAB.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Offline Malay Handwritten Cheque Words Recognition using Artificial Neural Network
  •    Optimal Approach for Neutron Images Restoration using Particle Swarm Optimization Algorithm with Regularization
How to cite this article:

Yupiter HP Manurung, M.Z. Puteri Zirwatul Nadila, Suhaila Abd Halim, Sunhaji Kiyai Abas, Ghalib Tham, Esa Haruman and Zulfahmy Awaldin, 2012. Development of Stand Alone Application Tool for Analyzing and Reporting Weld Imperfection Captured by μ-focussed Digital Radiography using MATLAB-based GUI. Journal of Applied Sciences, 12: 612-626.

DOI: 10.3923/jas.2012.612.626

URL: https://scialert.net/abstract/?doi=jas.2012.612.626

 
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

       

       

Curve Bottom