Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2012 | Volume: 12 | Issue: 10 | Page No.: 1058-1062
DOI: 10.3923/jas.2012.1058.1062
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Parametric Study of Bonded, Riveted and Hybrid Composite Joints Using FEA

K. Mohamed Bak, K. Prasanna Venkatesn and K. Kalai Chelvan

Abstract:
The composite structural members are highly used in the following applications such as aerospace, automobiles, robotic arms, architecture etc., has attracted extensive attention in the past decades. One of the important issues in the composite technology is the repairing of aging of aircraft structures. In such applications and also for joining various composite parts together, they are fastened together either using adhesives or mechanical fasteners. Modeling and static analysis of 3-D models of the joints (bonded, riveted and hybrid) were carried out using ANSYS 11 FEA software. The results were interpreted in terms of Von Mises stress. A parametric study was also conducted to compare the performance of the hybrid joint with varying adherent thickness, adhesive thickness and overlap length. To utilize the full potential of composite materials as structural elements, the strength and stress distribution of these joints must be understood. ANSYS FEA tool has been performed to investigate the stress distribution characteristics of various configurations of single lap joint. This study was focused on the analysis of stress distribution in three prominent joining methods namely, bonded, riveted and hybrid joints. FEA is used to study the stress distribution in the members involved under various design conditions and various joints failure criteria.
PDF Fulltext XML References Citation Report Citation
How to cite this article:

K. Mohamed Bak, K. Prasanna Venkatesn and K. Kalai Chelvan, 2012. Parametric Study of Bonded, Riveted and Hybrid Composite Joints Using FEA. Journal of Applied Sciences, 12: 1058-1062.

DOI: 10.3923/jas.2012.1058.1062

URL: https://scialert.net/abstract/?doi=jas.2012.1058.1062

COMMENTS
23 May, 2012
Raj kumar:
I am Final year M.E in Aeronautical Engg in India.I want to do M.E project in joint areas.I got some details related to experimental work.
23 May, 2012
Jeeva:
I got more ideas and concept related to joint details.So it was good concept and methodology.
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom