Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2010 | Volume: 10 | Issue: 20 | Page No.: 2411-2418
DOI: 10.3923/jas.2010.2411.2418
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Investigation of Strain Behavior in the Modified Equal Channel Angular Pressing Die by 3D Finite Element Method

Faramarz Djavanroodi and Mahmood Ebrahimi

Abstract:
In this study, strain behavior of a modified equal channel angular pressing die was investigated using three dimensional finite element method analyses. A modified ECAP process in which there is no need for removing the sample from the die channels between consecutive passes is proposed and analyzed. Strain behavior of material during ECAP up to four passes in simple and modified ECAP die was compared. Using modified ECAP die causes approximately 40% increase in the effective strain magnitude and removes in-homogeneity of strain distribution in the cross-section of the sample. Also, the pressing force requirement in the modified ECAP die is higher than simple ECAP die. Experimental data is used for validating simulation results.
PDF Fulltext XML References Citation Report Citation
How to cite this article:

Faramarz Djavanroodi and Mahmood Ebrahimi, 2010. Investigation of Strain Behavior in the Modified Equal Channel Angular Pressing Die by 3D Finite Element Method. Journal of Applied Sciences, 10: 2411-2418.

DOI: 10.3923/jas.2010.2411.2418

URL: https://scialert.net/abstract/?doi=jas.2010.2411.2418

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom