Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2007 | Volume: 7 | Issue: 8 | Page No.: 1164-1169
DOI: 10.3923/jas.2007.1164.1169
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Corrugated Bed Hydraulic Jump Stilling Basin

Farhad Izadjoo and Mahmood Shafai-Bejestan

Abstract:
Hydraulic jump stilling basins are used as an energy dissipater structures downstream of gates, spillways and weirs. In the present study the effect of trapezoidal shape corrugated bed on flow characteristics of hydraulic jump has been experimentally investigated. Total of 42 tests conducted in a flumes of 25 and 50 cm in width. Experimental were performed for wide range of Froude numbers ranging from 4 to 12. Six values of the relative roughness of corrugated shapes were studied. In all tests water surface profile and in 10 tests the vertical and the axial velocity profile were measured. From the analysis of data, the relative conjugate depths and the length of hydraulic jump were plotted against the Froude number. Comparison of these parameters with the same parameters in smooth bed hydraulic jump shows that the conjugate depth decreases 20% and the hydraulic jump length decreases 50%. These results show that corrugating the stilling bed can decrease the cost of stilling basin.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Effect of Convergent Walls on Energy Dissipation in Stilling Basin by Physical Modeling
  •    Hydraulic Jumps on New Roughened Beds
  •    A New Roughened Bed Hydraulic Jump Stilling Basin
How to cite this article:

Farhad Izadjoo and Mahmood Shafai-Bejestan , 2007. Corrugated Bed Hydraulic Jump Stilling Basin. Journal of Applied Sciences, 7: 1164-1169.

DOI: 10.3923/jas.2007.1164.1169

URL: https://scialert.net/abstract/?doi=jas.2007.1164.1169

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom