Subscribe Now Subscribe Today
Science Alert
 
FOLLOW US:     Facebook     Twitter
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2006 | Volume: 6 | Issue: 14 | Page No.: 2927-2931
DOI: 10.3923/jas.2006.2927.2931
Design of Tools for Stamping in Reactive Powder Concrete for Thin Sheets
Ahmed Tafraoui and Soltane Lebaili

Abstract:
We proposed to produce tools for stamping out of reactive powder concrete which substitutes the resin concrete tools covered with a resin with cast (freezing-coat) for the prototype parts (< 100 parts), in order to decrease the deadlines, to simplify the manufacturing process and to reduce the costs in the automobile body. A bench of abrasive wear was developed to determine the dynamic coefficient of friction concrete/metal sheet. We could show that the fact of not using any product of dismantling makes it possible to have a smooth surface, without any bubble on the working surface of the tool. This study showed that the tools for stamping in reactive powder concrete are an interesting alternative to the realization of small series and that this technique can apply already to the realization of prototype parts (< 100 units).
PDF Fulltext XML References Citation Report Citation
How to cite this article:

Ahmed Tafraoui and Soltane Lebaili , 2006. Design of Tools for Stamping in Reactive Powder Concrete for Thin Sheets. Journal of Applied Sciences, 6: 2927-2931.

DOI: 10.3923/jas.2006.2927.2931

URL: https://scialert.net/abstract/?doi=jas.2006.2927.2931

 
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

       

       

Curve Bottom