Subscribe Now Subscribe Today
Science Alert
 
FOLLOW US:     Facebook     Twitter
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2001 | Volume: 1 | Issue: 3 | Page No.: 325-328
DOI: 10.3923/jas.2001.325.328
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail
A Proportional-Integral-Derivative (PID) Controller Realization by Using Current Feedback Amplifiers (CFAs) and Calculating Optimum Parameter Tolerances
Cevat Erdal , Ali Toker and Cevdet Acar

Abstract:
In this work the synthesis procedure of a proportional-integral-derivative (PID) controller implemented with a commercially active component, AD 844, which is equivalent to the combination of a second generation current conveyor having a gain of +1 (CCII+) and a unity gain voltage buffer discussed. These current-mode (CM) circuits are not used in analog controller design so far. Furthermore the optimum parameter tolerances for the proposed PID circuit by the use of parameter sensitivities are determined. These tolerances keep the relative error at the output of the controller due to parameter variations in tolerance region.
PDF References Citation Report Citation
 RELATED ARTICLES:
  •    Design of Controllers Based on the Identified Model for the Humidifying Pilot Plant
  •    Intelligent Humidity Control for Healthy Home to Wealthy Industry: A Review
  •    Low Voltage High Frequency CCII Based Multifunction Filters and Chaos Generator
How to cite this article:

Cevat Erdal , Ali Toker and Cevdet Acar , 2001. A Proportional-Integral-Derivative (PID) Controller Realization by Using Current Feedback Amplifiers (CFAs) and Calculating Optimum Parameter Tolerances. Journal of Applied Sciences, 1: 325-328.

DOI: 10.3923/jas.2001.325.328

URL: https://scialert.net/abstract/?doi=jas.2001.325.328

 
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

       

       

Curve Bottom