Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Information Technology Journal
  Year: 2011 | Volume: 10 | Issue: 5 | Page No.: 965-973
DOI: 10.3923/itj.2011.965.973
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Handover in Bluetooth Networks using Signal Parameters

Fazli Subhan, Halabi Hasbullah, Azat Rozyyev and Sheikh Tahir Bakhsh

Abstract:
Bluetooth is an established standard for low cost, low power, wireless personal area network. Currently Bluetooth does not support any handover protocol in which handoff occurs dynamically, when a Bluetooth device is moving out of the piconet. This paper presents Bluetooth handover concept in terms of measuring the signal parameters with respect to localization. These parameters are Received Signal Strength Indicator (RSSI), Link Quality (LQ), Transmitted Power Link (TPL) and Received Power (RX). According to the experimental analysis based on Bluetooth specifications, only Received Power RX is best suited for distance estimation and handover decision. Furthermore this paper discusses location estimation techniques, Bluetooth signal parameters for distance estimation and finally experimental analysis of signal parameters and their comparisons with distance is discussed. The main objective of this paper is to analyze the relation between Signal parameters and Handover. The parameter selected for distance based measurement can be used as threshold value for handover initiation. All the work is being done in BlueZ using Linux kernel 2.6.
PDF Fulltext XML References Citation Report Citation
How to cite this article:

Fazli Subhan, Halabi Hasbullah, Azat Rozyyev and Sheikh Tahir Bakhsh, 2011. Handover in Bluetooth Networks using Signal Parameters. Information Technology Journal, 10: 965-973.

DOI: 10.3923/itj.2011.965.973

URL: https://scialert.net/abstract/?doi=itj.2011.965.973

COMMENTS
28 July, 2012
Nynga vergez-saturnel:
Merci pour ces auteurs de leur apports dans le monde de la recherche. En effet j'ai aimer leurs travaux et j'aimerai moi aussi faire un travail presque similaire dans le cadre du Wifi. c'est pour cette raison que je demande de l'aide aux chercheurs de aiguillé dans ce travail.je veux d'abord savoir si cette même paramètre peut-être considéré comme paramètre pour déclencher le handover pour une application de téléphonie mobile? sinon quel est le meilleur paramètre.
Ensuite quel est la valeur seuil(distance) maximale dans une cellule(zone de couverture d'un AP émettant au plus à 300m) qui offre une communication acceptable pour la téléphonie mobile.
cordialement,



Google Translation:

Thank you for these authors for their contributions in the research world. In fact I love their work and would like me too do work almost similar in the Wifi. this is why I asked for help researchers in this referral travail.je first want to know if the same parameter can be considered as a parameter to trigger the handover for a mobile phone application? otherwise what is the best setting.
Then what is the threshold value (distance) up in a cell (coverage area of ??an AP emitting at 300 m) which offers an acceptable communication for mobile phones.
Sincerely,
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 

Curve Bottom