Citations in impact factor journals
Effect of fuel injection timing of hydrogen rich syngas augmented
with methane in direct-injection spark-ignition engine International Journal of Hydrogen Energy |
Engine speed and air-fuel ratio effect on the combustion of
methane augmented hydrogen rich syngas in DI SI engine International Journal of Hydrogen Energy |
Biodegradable and non-biodegradable fraction of municipal solid waste for multifaceted applications through a closed loop integrated refinery platform: Paving a path towards circular economy Science of The Total Environment |
Citation to this article as recorded by
Hagos, F.Y., A.R.A. Aziz and S.A. Sulaiman, 2012. Early flame development image comparison of low calorific value syngas and CNG in DI SI gas engine. IOP Conf. Series: Earth Environ. Sci., 16: 1-4. CrossRefDirect Link |
Citation to this article as recorded by
Parametric study of free-piston engine combustion under different compression ratios International Journal of Ambient Energy Vol. 43, Issue 1, 7484, 2022 |
Numerical Simulation of Re-Entrant Bowl Effects on Natural-Gas
Spark-Ignition Operation Journal of Engineering for Gas Turbines and Power Vol. 141, Issue 6, 061023, 2019 |
Trends of Syngas as a Fuel in Internal Combustion
Engines Advances in Mechanical Engineering |
Effects of split and single injection strategies on particle
number emission and combustion of a GDI
engine Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering |
Effect of injection timing on combustion, performance and
emissions of lean-burn syngas (H2/CO) in spark-ignition direct-injection
engine International Journal of Engine Research Vol. 17, Issue 9, 921, 2016 |
Natural Gas Engine Technologies: Challenges and Energy
Sustainability Issue Energies Vol. 11, Issue 11, 2934, 2018 |
How to cite this article
Ftwi Yohaness Hagos, A. Rashid A. Aziz, Shaharin A. Sulaiman and Firmansyah, 2012. Combustion Characteristics of Late Injected CNG in a Spark Ignition Engine under Lean Operating Condition. Journal of Applied Sciences, 12: 2368-2375.
DOI: 10.3923/jas.2012.2368.2375
URL: https://scialert.net/abstract/?doi=jas.2012.2368.2375
DOI: 10.3923/jas.2012.2368.2375
URL: https://scialert.net/abstract/?doi=jas.2012.2368.2375