Citations in impact factor journals
Changes in the microbiota during biological treatment of palm oil mill waste: A critical review Journal of Environmental Management |
Citation to this article as recorded by
Citation to this article as recorded by
Interlayer thermal history modification for interface strength in
fused filament fabricated parts Progress in Additive Manufacturing |
Optimizing process parameters of fused deposition modeling by Taguchi method for the fabrication of lattice structures Additive Manufacturing |
Enhancement of potato (Solanum tuberosum L) postharvest quality by use of magnetic fields – A case of shangi potato variety Applied Food Research |
Process optimization and stochastic modeling of void contents and
mechanical properties in additively manufactured composites Composites Part B: Engineering |
Water quality index assessment methods for surface water: A case study of the Citarum River in Indonesia Heliyon Vol. 8, Issue 7, e09848, 2022 |
Genetic control of earliness in cowpea (Vigna unguiculata (L) Walp) Heliyon Vol. 8, Issue 7, e09852, 2022 |
New data on medically important scorpion species of Iran based on seven physiographic areas Heliyon Vol. 8, Issue 7, e09877, 2022 |
Influence of the pH of anthocyanins on the efficiency of dye sensitized solar cells Heliyon Vol. 8, Issue 7, e09921, 2022 |
A review on the applications of zinc tungstate (ZnWO4) photocatalyst for wastewater treatment Heliyon Vol. 8, Issue 7, e09964, 2022 |
Finite element composite simplification modeling and design of the material extrusion wave infill for thin-walled structures International Journal of Mechanical Sciences |
Become an environmentally responsible customer by choosing low-carbon footprint products at restaurants: Integrating the elaboration likelihood model (ELM) and the theory of planned behavior (TPB) Journal of Hospitality and Tourism Management |
Ovipositional response of Antilochus coquebertii and Dysdercus koenigii in different media under controled conditions Journal of King Saud University - Science Vol. 34, Issue 7, 102252, 2022 |
An in-process laser localized pre-deposition heating approach to
inter-layer bond strengthening in extrusion based polymer additive
manufacturing Journal of Manufacturing Processes |
A review on recent advancements in fused deposition modeling Materials Today: Proceedings |
Optimization of process parameters and evaluation of surface roughness for 3D printed nylon-aramid composite Materials Today: Proceedings |
An approach to improve interface healing in FFF-3D printed Ultem
1010 using laser pre-deposition heating Procedia Manufacturing |
A Reverse CAD Approach for Estimating Geometric and Mechanical
Behavior of FDM Printed Parts Procedia Manufacturing |
Effect of in-process laser interface heating on strength isotropy of extrusion-based additively manufactured PEEK Procedia Manufacturing |
Relaxation of residual stress in fused filament fabrication part with in-process laser heating Procedia Manufacturing |
3D printing technology for textiles and fashion Textile Progress Vol. 52, Issue 4, 167, 2020 |
Optimization of significant factors for improving compressive strength of ABS in Fused Deposition Modeling by using GA & RSM IOP Conference Series: Materials Science and Engineering Vol. 748, Issue 1, 012007, 2020 |
State-of-the-art in empirical modelling of rapid prototyping processes Rapid Prototyping Journal Vol. 20, Issue 2, 164, 2014 |
A Systematic Survey of FDM Process Parameter Optimization and
Their Influence on Part Characteristics Journal of Manufacturing and Materials Processing Vol. 3, Issue 3, 64, 2019 |
Indirect Temperature Measurement in High Frequency Heating Systems Sensors Vol. 21, Issue 7, 2561, 2021 |
How to cite this article
J. Laeng, Zahid A. Khan and S.Y. Khu, 2006. Optimizing Flexible Behaviour of Bow Prototype Using Taguchi Approach. Journal of Applied Sciences, 6: 622-630.
DOI: 10.3923/jas.2006.622.630
URL: https://scialert.net/abstract/?doi=jas.2006.622.630
DOI: 10.3923/jas.2006.622.630
URL: https://scialert.net/abstract/?doi=jas.2006.622.630