Citations in impact factor journals
Angiotensin-converting enzyme inhibitory and antioxidative activities and functional characterization of protein hydrolysates of hard-to-cook chickpeas Journal of the Science of Food and Agriculture Vol. 92, Issue 9, 1974, 2012 |
Geographic variability in response to azinphos-methyl in field-collected populations of Cydia pomonella (Lepidoptera: Tortricidae) from Argentina Pest Management Science |
Multi-response optimization of machining parameters in hot turning using grey analysis The International Journal of Advanced Manufacturing Technology |
Quantitative Grading Using Grey Relational Analysis on Ultrasonographic Images of a Fatty Liver Journal of Medical Systems |
Improving growth, flower yield, and water relations of snapdragon (Antirhinum majus L.) plants grown under well-watered and water-stress conditions using arbuscular mycorrhizal fungi Photosynthetica Vol. 50, Issue 2, 305, 2012 |
Analyzing the significance of defoliation in growth, photosynthetic compensation and source-sink relations Photosynthetica Vol. 50, Issue 2, 161, 2012 |
Application of Modified Atmosphere Packaging and Active/Smart Technologies to Red Meat and Poultry: A Review Food and Bioprocess Technology Vol. 5, Issue 5, 1423, 2012 |
Microsatellite polymorphism in Tunisian pomegranates (Punica granatum L.): Cultivar genotyping and identification Biochemical Systematics and Ecology |
Mechanism of Pb2+ removal from aqueous solution using a nonliving moss biomass Chemical Engineering Journal |
Intra-specific Hybridization: Generator of Genetic Diversification and Heterosis in Andrographis paniculata Nees. A Bridge from Extinction to Survival Gene |
Hybrid Mutation Particle Swarm Optimisation method for Available Transfer Capability enhancement International Journal of Electrical Power & Energy Systems Vol. 42, Issue 1, 240, 2012 |
Optimization of cutting conditions for sustainable machining of peek cf30 using tin tools Journal of Cleaner Production |
Towards a Better Understanding of Medicinal Uses of the Brown Seaweed Genus Sargassum in Traditional Chinese Medicine: A Phytochemical and Pharmacological Review Journal of Ethnopharmacology |
Assessment of the bacteriological quality and nitrate pollution risk of quaternary groundwater in the southern part of Abidjan District (Côte d'Ivoire) Journal of Hydro-environment Research |
Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method Measurement |
Laccase-based dye decolorization using agro-wastes: comment on Santhanam et al. Trends in Biotechnology |
Design and Optimization of a Semicontinuous Hot–Cold Extraction of Polyphenols from Grape Pomace Journal of Agricultural and Food Chemistry Vol. 60, Issue 22, 5571, 2012 |
Metal-based antibacterial agents: synthesis, characterization, and in vitro biological evaluation of cefixime-derived Schiff bases and their complexes with Zn(II), Cu(II), Ni(II), and Co(II) Journal of Coordination Chemistry Vol. 64, Issue 11, 1914, 2011 |
Removal of arsenic from aqueous environments by native and chemically modified biomass of Aspergillus niger and Neosartorya fischeri Environmental Technology Vol. 32, Issue 11, 1215, 2011 |
Anti-clastogenic effect of diosgenin on 7,12-dimethylbenz(a)anthracene treated experimental animals Toxicology Mechanisms and Methods |
Citation to this article as recorded by
Cao, X. and W.L. Cleghorn, 2011. Parametric optimization of an eight-bar mechanism of a wheel loader based on simulation. Inform. Technol. J., 10: 1801-1808. CrossRefDirect Link |
Citation to this article as recorded by
Investing in a sustainable recovery World of Work Report Vol. 2012, Issue 1, 81, 2012 |
Intelligent Manufacturing and Energy Sustainability Smart Innovation, Systems and Technologies |
Multi-objective optimization of cutting parameters in high-speed milling based on grey relational analysis coupled with principal component analysis Frontiers of Mechanical Engineering |
Exploring ‘knowns’ and ‘unknowns’ in tropical seascape connectivity with insights from East African coral reefs Estuarine, Coastal and Shelf Science |
An experimental investigation with minimum quantity lubrication
and its comparison with various vegetable oil based cutting fluids during
turning Materials Today: Proceedings Vol. 4, Issue 8, 8758, 2017 |
Multi-Objective Optimization during Hard Turning of AISI D2 Steel
Using Grey Relational Analysis Materials Today: Proceedings Vol. 5, Issue 5, 13620, 2018 |
Experimental investigation and micromechanical modeling of high strain rate compressive yield stress of a melt mixing polypropylene organoclay nanocomposites Mechanics of Materials |
Influence of Cutting Parameters on Cutting Force and Surface
Finish in Turning Operation Procedia Engineering |
Concentrations of Cd, Ni, Pb, and Cr in the two edible fish species Liza klunzingeri and Sillago sihama collected from Hara biosphere in Iran Toxicological & Environmental Chemistry |
Optimization of machining parameters when machining beyond recommended cutting speed World Journal of Engineering Vol. ahead-of-print, Issue ahead-of-print, , 2020 |
Effect of surface hardness and roughness produced by turning on
the torsion mechanical properties of annealed AISI 1020 steel Revista Facultad de IngenierĂa Universidad de Antioquia Vol. , Issue 84, 55, 2017 |
OPTIMIZATION OF TURNING PARAMETERS BY USING TAGUCHI
METHOD AND ANALYSIS OF VARIANCE (ANOVA) FOR TURNING
OF ALUMINIUM ALLOY Al7068 WITH VARYING ZINC
COMPOSITION i-manager's Journal on Material Science Vol. 8, Issue 2, 16, 2020 |
Multiple Response Optimization of machining parameters on turning of AA 6063 T6 aluminum alloy which established on Taguchi L9 orthogonal array coupled with Grey relational analysis International Journal of Scientific Research in Science and Technology |
Machining of Inserts with PCD Cutting-Edge Technology and Determination of Optimum Machining Conditions Based on Roundness Deviation and Chip-Cross Section of AW 5083 AL-Alloy Verified with Grey Relation Analysis Processes Vol. 9, Issue 9, 1485, 2021 |
Parametric Optimization of an Eight-bar Mechanism of a Wheel Loader Based on Simulation Information Technology Journal Vol. 10, Issue 9, 1801, 2011 |
Grey-Based Taguchi Analysis for Optimization of Multi-Objective
Machining Process in Turning International Journal of Strategic Decision Sciences Vol. 4, Issue 2, 79, 2013 |
Simultaneous Optimization of Correlated Multiple Surface Quality
Characteristics of Mild Steel Turned Product Intelligent Information Management Vol. 02, Issue 01, 26, 2010 |
How to cite this article
M.Y. Wang and T.S. Lan, 2008. Parametric Optimization on Multi-Objective Precision Turning Using Grey Relational Analysis. Information Technology Journal, 7: 1072-1076.
DOI: 10.3923/itj.2008.1072.1076
URL: https://scialert.net/abstract/?doi=itj.2008.1072.1076
DOI: 10.3923/itj.2008.1072.1076
URL: https://scialert.net/abstract/?doi=itj.2008.1072.1076