Citations in impact factor journals
Flank wear and rake wear studies for arc enhanced HiPIMS coated AlTiN tools during high speed machining of nickel-based superalloy Surface and Coatings Technology |
Citation to this article as recorded by
Ali, A.M., E.Y.T. Adesta, D. Agusman, S.N.M. Badari and M.H.F. Al-Hazza, 2011. Development of surface roughness prediction model for high speed end milling of hardened tool steel. Asian J. Scientific Res., 4: 255-263. CrossRefDirect Link |
Windarta, M.B. Sudin and M.B. Baharom, 2012. Prediction of contact temperature on interaction between rail and wheel materials using pin-on-disc method. J. Applied Sci., 12: 2424-2429. CrossRefDirect Link |
Citation to this article as recorded by
Optimization of surface roughness and tool wear in sustainable dry turning of Iron based Nickel A286 alloy using Taguchi’s method Cleaner Engineering and Technology |
Tool wear investigation in high-pressure jet coolant
assisted machining Ti2AlNb intermetallic alloys based on FEM International Journal of Lightweight Materials and Manufacture |
An analytical model for the prediction of force distribution of
round insert considering edge effect and size effect International Journal of Mechanical Sciences |
The surface roughness analysis using sound signal in turning of mild steel IOP Conference Series: Materials Science and Engineering Vol. 703, Issue 1, 012011, 2019 |
Comparison and optimization of PVD and CVD method on surface
roughness and flank wear in hard-machining of DIN 1.2738 mold
steel Sensor Review |
Food Safety Risks Posed by Heavy Metals and Persistent Organic Pollutants (POPs) Related to Consumption of Sea Cucumbers Foods Vol. 11, Issue 24, 3992, 2022 |
Models for Prediction of Surface Roughness in a Face
Milling Process Using Triangular Inserts Lubricants Vol. 7, Issue 1, 9, 2019 |
Nickel-Based Alloy Dry Milling Process Induced Material Softening Effect Materials Vol. 13, Issue 17, 3758, 2020 |
Implementation of Passing Vehicle Search Algorithm for Optimization of WEDM Process of Nickel-Based Superalloy Waspaloy Nanomaterials Vol. 12, Issue 24, 4394, 2022 |
Development of Surface Roughness Prediction Model for High Speed End Milling of Hardened Tool Steel Asian Journal of Scientific Research Vol. 4, Issue 3, 255, 2011 |
How to cite this article
H.H. Habeeb, K.A. Abou-El-Hossein, Bashir Mohamad, Jahara A. Ghani and K. Kadirgama, 2008. Investigating of Tool Wear, Tool Life and Surface Roughness When Machining of Nickel Alloy 242 with Using of Different Cutting Tools. Asian Journal of Scientific Research, 1: 222-230.
DOI: 10.3923/ajsr.2008.222.230
URL: https://scialert.net/abstract/?doi=ajsr.2008.222.230
DOI: 10.3923/ajsr.2008.222.230
URL: https://scialert.net/abstract/?doi=ajsr.2008.222.230