Jin-Ling Cao
School of Energy Engineering, College of Yulin, 719000, China
Ying Luo
School of Energy Engineering, College of Yulin, 719000, China
ABSTRACT
With the spindle system of M8400A type roll grinding machine as the object of the research. On the basis of the establishment of the three-dimensional solid model of the roll grinder grinding head spindle system, carry out finite element static analysis, with the spindle structural stress and strain diagram, study its static characteristics, carry out modal analysis in the properly simplified spindle system with the finite element method, analyze the calculated natural frequency value, study dynamic characteristics of the spindle system, lay the foundation for the realization of the dynamic design of product.
PDF References Citation
How to cite this article
Jin-Ling Cao and Ying Luo, 2013. Study on Spindle System Static and Dynamic Characteristic in Grinding Head Based on Finite Element Analysis. Journal of Applied Sciences, 13: 4317-4321.
DOI: 10.3923/jas.2013.4317.4321
URL: https://scialert.net/abstract/?doi=jas.2013.4317.4321
DOI: 10.3923/jas.2013.4317.4321
URL: https://scialert.net/abstract/?doi=jas.2013.4317.4321
REFERENCES
- Yin, L., H. Huang, K. Ramesh and T. Haung, 2005. High speed versus conventional grinding in high removal rate machining of alumina and alumina-titania. Int. J. Mach. Tools Manuf., 45: 897-907.
CrossRefDirect Link - Wu, X.H., Y.L. Yuan, W.W. Zhu and J. Guo, 2012. Impact loss evaluation of terrorism disasters based on input-output model. J. Convergence Inform. Technol., 7: 811-819.
CrossRef - Rehorn, A.G., J. Jiang, P.E. Orban and E. Bordatchev, 2004. Modelling and experimental investigation of spindle and cutter dynamics for a high-precision machining center. Int. J. Adv. Manuf. Technol., 24: 806-815.
CrossRef - Ast, A., S. Braun, P. Eberhard and U. Heisel, 2009. An adaptronic approach to active vibration control of machine tools with parallel kinematics. Prod. Eng., 3: 207-215.
CrossRef - Wu, Y., T. Kondo and M. Kato, 2005. A new centerless grinding technique using a surface grinder. J. Mater. Process. Technol., 162-163: 709-717.
CrossRef