Lanting Zhang
College of Mechanical Engineering, Inner Mongolia University of Technology, Hohhot, 010051, China
Yicheng Zhang
Bureau of Complete Machinery and Equipment of Inner Mongolia, Hohhot, 010020, China
ABSTRACT
At present, parametric design and feature modeling are the two main developing direction of CAD. Integrating feature modeling with parameterized technology is the effective method and measure to three-dimensional design and modeling, which product feature is modeled by parameter. According to its characteristic, common basic feature of shaft part is analyzed and feature of shaft part is classified and described concretely and feature information model is established in this study. Feature modeling method and parameterized feature modeling technology of shaft part are studied and parameterized feature modeling module based on UG NX for shaft part is developed. The results prove that the feasibility and effectiveness of this modeling technology and method.
PDF References Citation
How to cite this article
Lanting Zhang and Yicheng Zhang, 2013. Study and Application of Parametric Feature Modeling Technology for Shaft
Part. Journal of Applied Sciences, 13: 2606-2609.
DOI: 10.3923/jas.2013.2606.2609
URL: https://scialert.net/abstract/?doi=jas.2013.2606.2609
DOI: 10.3923/jas.2013.2606.2609
URL: https://scialert.net/abstract/?doi=jas.2013.2606.2609
REFERENCES
- Han, J.H. and A.A.G. Requicha, 1998. Modeler-independent feature recognition in a distributed environment. Comput. Aided Des., 5: 35-41.
CrossRefDirect Link