Subscribe Now Subscribe Today
Research Article
 

The Analysis of Shape Coefficients for Selected Raw Materials



Barbara Peszko , Jacek Kordek , Tomasz Niedoba and Aldona Krawczykowska
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail
ABSTRACT

The study presents the results of shape coefficient calculation for mineral grains of sieve sizes below 0.3 mm. To perform the analysis, the photos from scanning microscope and computer image analysis were used It was found that for the analyzed material, the full mechanical similarity occurred with the grain communition and the shape coefficients did not change. The course of elongation for analyzed population may be described by the quadratic curve. The investigations are in progress.

Services
Related Articles in ASCI
Similar Articles in this Journal
Search in Google Scholar
View Citation
Report Citation

 
  How to cite this article:

Barbara Peszko , Jacek Kordek , Tomasz Niedoba and Aldona Krawczykowska , 2007. The Analysis of Shape Coefficients for Selected Raw Materials. Journal of Applied Sciences, 7: 2084-2087.

DOI: 10.3923/jas.2007.2084.2087

URL: https://scialert.net/abstract/?doi=jas.2007.2084.2087

REFERENCES
Allen, T., 1992. Particle Size Measurement. Chapman and Hall, USA.

Feda, J., 1982. Mechanics of Particulate Materials: The Principles. Development in Geotechnical Engineering 30. Czechoslovak Academy of Sciences, Elsevier, Amsterdam.

Russ, J.C., 1986. Practical Steorology. Plenum, New York.

Serra, J., 1982. Image Analysis and Mathematical Morphology. Academic Press, New York.

Tadeusiewicz, R. and P. Korohoda, 1997. Komputerowa Analiza I Przetwarzanie Obrazow. Wydawnictwo Fundacji Postpu Telekomunikacji, Krakow.

Wojnar, L., K.J. Kurzydowski and J. Szala, 2002. Praktyka Analizy Obrazu. Polskie Towarzystwo Stereologiczne, Krakow.

Xu, R. and O.A. di Guida, 2003. Comparison of sizing small particles using different technologies. Powder Technol., 132: 145-153.
Direct Link  |  

©  2020 Science Alert. All Rights Reserved