• [email protected]
  • +971 507 888 742
Submit Manuscript
SciAlert
  • Home
  • Journals
  • Information
    • For Authors
    • For Referees
    • For Librarian
    • For Societies
  • Contact
  1. Information Technology Journal
  2. Vol 12 (4), 2013
  3. 704-711
  • Issues
    Online First Current Issue All Issues
  • Information About
    Aims and Scope Editorial Board Guide to Authors Article Processing Charges
    Submit a Manuscript

Information Technology Journal

Year: 2013 | Volume: 12 | Issue: 4 | Page No.: 704-711
DOI: 10.3923/itj.2013.704.711
crossmark

Facebook Twitter Reddit Linkedin E-mail
Research Article

Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance

Geng Yuefeng
College of Electrical and Information Engineering, Xuchang University, Xuchang 461000, China

ABSTRACT


The spatial redundant robot model was established, its inverse kinematics solution was derived and chaotic motion in zero space self-motion was analyzed; the potential function was constructed by artificial potential field method for the chaotic motion in the zero space self-motion. Simulation results showed that chaotic motion in zero space self-motion of the spatial redundant robot changed into regular motion after joining the potential function in the inverse kinematics solutions of the spatial redundant robot, therefore, the artificial potential field method as chaotic motion control of the spatial redundant robot algorithm was effective.
PDF Abstract XML References Citation

Keywords


  • The spatial redundant robot
  • artificial potential field method
  • self-motion
  • self-motion

Article History

Received: September 07, 2012;   Accepted: November 24, 2012;   Published: January 22, 2013

How to cite this article

Geng Yuefeng, 2013. Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance. Information Technology Journal, 12: 704-711.

DOI: 10.3923/itj.2013.704.711

URL: https://scialert.net/abstract/?doi=itj.2013.704.711

INTRODUCTIONS

Redundant robot is the number of degrees of freedom more than the dimensions of the task space (Lu, 2007). Such robots can realize the motion law of the end-effector and can improve the dexterity, obstacle avoidance capability and dynamic performance to avoid joint overrun of the robot simultaneously by using of the self-motion of the zero space (Xinfeng, 2012). Therefore, the redundant robot has become a hot research in the field of mechanical engineering and automatic control for its great potential advantage applications in the manufacturing industry. The self-motion of redundant robot can lead to the chaotic motion generated (Yin and Ge, 2011), the chaotic motion will bring great difficulties to the robot control. Therefore, to make use of the advantages while avoiding chaotic motion in the redundant robot control process.

Controlling the chaotic motion means that the additional performance optimization is added in redundant robot zero space. In actual industrial field, there will be many obstacles exist due to the limitations of the workspace; the redundant robot should avoid collision with the obstacles. The main avoiding robot obstacle methods are geometric method (Nektarios and Aspragathos, 2010), genetic algorithms (Li et al., 2012) and artificial potential field method (Klein, 1984), geometric method and genetic algorithm are global planning, the search time is long, the hardware requirements is high and the real-time control is difficult. The artificial potential field method can not guarantee that the conclusion is the global optimum, but the obstacle avoidance potential function is easy to construct and the computing time is short, the real-time control is facilitated to realize. Research on obstacle avoidance planning has made many achievements based on artificial potential field since the artificial potential field method is proposed for the first time by Khatib (1986) and Ye and Wang (2012).

An obstacle avoidance potential function to avoid the collision with multiple obstacles in the workspace is constructed based on the study of Mohri et al. (1995) in this study, the obstacle avoidance potential function is applied to solve the inverse kinematics problem of the redundant robot, simulation results show that the chaotic motion become a fixed periodic orbits motion that inverse kinematics solution of redundant robot is optimized by the obstacle avoidance potential function.

THE CHAOTIC MOTION ANALYSIS IN THE SPATIAL REDUNDANT ROBOT SELF-MOTION

The spatial redundant robotic manipulator’s model: Because of the spatial robotic body is not fixed, reaction and torque to the robotic body will be generated by motion of the robotic manipulator and caused position and posture of the robotic body change, the position and posture changes of the robotic body in turn affect positioning of the robotic manipulator, thus affecting the end-effector’s operational planning, so the free-floating spatial redundant robotic manipulator’s kinetic characteristics are very different from the fixed base robotic manipulator’s (Vakakis and Burdick, 1990). Establish inertial coordinate system ΣI which fixed on center of mass of system, joint coordinate system Σi which fixed on the ith joint, D-H parameters of joint coordinate system according to D-H parameters method (Denavit and Hartenberg, 1995), body coordinate system Σ0 which fixed on center of mass of the body, the position and posture which body coordinate system relative to inertial coordinate system are expressed by the position vector r0 and Z-Y-X Euler angles α, β, γ (Fig. 1):

ΣI = Inertial coordinate system that fixed on the system centroid
ΣI = Joint coordinate system that fixed on the ith joint of the robotic manipulator
m0,i0 = The mass and inertia moment of the basic body
mi,Ii = The mass and inertia moment of the ith link
r0 = The position vector from the origin of the inertial coordinate system to the origin of the basic body coordinate system
rci = The position vector from the origin of the inertial coordinate system to the ith link centroidcoordinate system
pi = The position vector expressed in the ith link coordinate system from the origin of the ith link coordinate system to the centroid
ii-1l = The position vector expressed in the (i-1)th link coordinate system from the origin of the (i-1)th link coordinate system to the origin of the ith link coordinate system
Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance = The angular velocity vector of the robotic manipulator ith joint
ωi = The angular velocity of the robotic manipulator’s ith joint expressed in the joint coordinate system that fixed on the ith joint of the robotic manipulator
vi = The line velocity of the robotic manipulator ith joint expressed in the joint coordinate system that fixed on the ith joint of the robotic manipulator
ωic = The angular velocity of the robotic manipulator’s ith joint centroid expressed in the joint coordinate system that fixed on the ith joint of the robotic manipulator
vic = The line velocity of the robotic manipulator’s ith joint centroid expressed in the joint coordinate system that fixed on the ith joint of the robotic manipulator

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
Fig. 1: The spatial redundant robotic manipulator model of n joints

Inverse kinematics of the spatial redundant robot: Kinematics manipulability W of the spatial redundant robotic manipulator is select as optimal objective function of avoiding singular, PD controller is designed to make the end-effector track the closed curve of the robotic work space repeatedly, joint acceleration expression can be obtained based on the pseudo-inverse of Jacobian matrix:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(1)

Therein, Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance is the gradient of manipulability function, Kv = kv*I, Kp = kp*I, kv, kp are the magnification times of the displacement error and velocity error, respectively, I is unit matrix, Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance is the desired acceleration of the end-effector, ep = pd-Xed, Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance are the position deviation and velocity deviation of the end-effector, respectively. Scalar magnification coefficient a = 1.

In order to facilitate research, the state variables defined as follows:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(2)

Therein, X1 = Q = [Q0, Q1, Q2, L, Qn]T, X2 = Q = [Q0, Q1, Q2,..., Qn]T.

The original system equation can be expressed as:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(3)

The chaotic motion analysis: The 3 joints redundant spatial robotic manipulator operated plane motion which is taken as an example and computer numerical simulation is made in this study. Simulation requires the end-effector moving by desired trajectory.

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
Fig. 2(a-d): The time course of qi

System parameters are as follows: the body mass is m0 = 1 kg, each link mass are m1 = m2 = m3 = 1 kg, i0 1 kg m2 the body rotary inertia is i0 = 200 kg m2, each link rotary inertia are i1 = 0.3 kg m2, i2 = 0.2 k g2, i3 = 0.1 kg m2, the length of links are l1 = l2 = l3 = 1 m, the distance from the body center of mass to the first joint is l0 = 1 m, position vector of the body center of mass in inertial coordinate system is rI = (0,0.2), the desired trajectory, the desired velocity and the desired acceleration of the end-effector are, respectively:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(4)

By simulation we can see that different initial shape of the free-floating spatial redundant robotic manipulator and coefficient kv, kp which make system closed-loop stability can lead to chaotic motion of the spatial redundant robotic system. Limited space, here only given a set of values simulation results:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(5)

Initial shape:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(6)

To further observe the system’s self-motion state, the time course of the joint figure, phase figure and Poincare section are drawn and as shown in Fig. 2-4.

From the time course can be seen that the base angle and joint angle changes over time showed the characteristics of chaotic motion. During the experiment, modify the initial value of the robotic system, the time course of the robotic system has greatly changed which indicates the initial sensitivity of the robotic system.

From Fig. 3 can be seen that the phase trajectory is randomly distributed, neither overlap nor intersect, repeated folding in a certain area. There is chaotic motion in redundant spatial robotic system at initial judgments.

From Fig. 4 can be seen that Poincare section composed by an infinite number of discrete points. The self-motion of robotic system has characteristics of chaotic motion for the nature of the Poincare section.

A large number of numerical simulations are exercised by chaos analysis method such as direct observation, time-course method, phase figure and Poincare section method.

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
Fig. 3(a-d): Phase figure of qi

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
Fig. 4(a-d): Poincare section of qi

The results show that: the free-floating redundant spatial robotic manipulator’s self-motion is chaotic when solving the robotic manipulator’s inverse kinematics based on pseudo-inverse Jacobian matrix, designing PD controller to make the end-effector track the closed curve of the robotic work space repeatedly.

INVERSE KINEMATICS SOLUTIONS BASED ON THE OBSTACLE AVOIDANCE POTENTIAL FUNCTION

The artificial potential field method: Assumed the robotic links are straight and each of the obstacles in the workspace can be included in a sphere, as shown in Fig. 5.

Obstacle avoidance potential function can be constructed using the geometric relationship between the robot and obstacle, the distance between link jth and obstacle ith is as follow:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(7)

where, k is the number of obstacles; n is the number of joints; Oi is the position vector of the obstacle ith; Pj is the position vector of the joint jth.

The distance between joint jth and obstacle ith is:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(8)

Obstacle avoidance potential function is:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(9)

where, when {d1ij-ri-si}< 0 and Dij locate between Pj and Pj+1, F1ij (q) = (d1ij-ri-si)2, otherwise F1ij (q) = 0; when (d2ij-ri-si)<0, (d2ij-ri-si)2, otherwise F1ij (q) = 0; W1 and W2 are positive constant; ri is the radius of the sphere, si is safety factor, Dij is the foot of a perpendicular line from the center of the obstacle ith to the link jth.

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
Fig. 5: The relative position of the robot with the obstacle

Assumed the robot task is tracking a plane round, the desired trajectory of the end-effector is shown in formula (4). W1 and W2 take as 2, si take as 0.1, the obstacle avoidance potential function is:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(10)

Inverse kinematics solutions based on the obstacle avoidance potential function: The redundant robotic acceleration inverse solution based on the Jacobian matrix pseudo-inverse under avoiding obstacles is expressed as:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(11)

where, η = ∇h (q)∈R3x1 is the gradient of the obstacle avoidance potential function, substitute the formula (2) and (10) into (11) and transformed the formula (11) into the first-order differential equations, such as:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(12)

CHAOS MOTION CONTROL RESULTS AND ANALYSIS

Chaos control algorithm procedure is as follows:

The first step, selected the obstacle avoidance potential function; the second step, optimized the redundant robotic manipulator inverse kinematics taking use of the selected obstacle avoidance potential function as a secondary task; the third step, simulated kinematics according to the optimization results by added the perturbation signal.

After adding perturbation control signal N(t) = μ [y(t)-(t-t)], The formula (12) becomes:

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
(13)

The relation between the largest Lyapunov exponent λmax of the system and the delayed feedback coefficient K is shown in Fig. 6. when 1.3<μ2.3 and λmax<0, the spatial redundant robot system changed into regular motion state.

The desired period of the spatial redundant robot is T = 2π/ω = 1 sec, take τ = T = 1 sec, a group disturbance weighting value that can control the chaotic motion is selected, the other parameters are the same as before.

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
Fig. 6: The relation between λmax and K

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
Fig. 7(a-d): The time course of qi after mixed the delayed feedback control

In order to obtain information of the original system fully, the delayed feedback control is mixed for further study after 5 sec. Figure 7-9 are the time course figure of qi, the phase figure of qi, the Poincare section figure of qi, these figures confirmed that the system has been converted to the periodic motion.

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
Fig. 8(a-d): Phase figure of qi after mixed the delayed feedback control

Image for - Chaos Control Algorithm for Redundant Robotic Obstacle Avoidance
Fig. 9(a-d): Poincare section of qi after mixed the delayed feedback control

CONCLUSIONS

The self-motion of the spatial redundant robot system is studied in simulation; the results showed that the self-motion state of the redundancy spatial robotic is chaotic. the delay time τ is used for the desired period and the corresponding figure between the feedback weighting coefficient k and its motion state is drawn according to the characteristics of chaotic motion. The chaotic motion in self-motion of the spatial redundant robot is converted to the periodic motion rapidly selecting the appropriate control parameters.

ACKNOWLEDGMENT


This study is financially supported by National Natural Science Foundation of China (51275479).

REFERENCES


  1. Lu, Z., 2007. Principle and Application of Redundant Robot. China Machine Press, China, pp: 50-60.

  2. Xinfeng, G.E. and Z. Dongbiao, 2012. Parameterized self-motion manifold of 7-DOF automatic fiber placement robotic manipulator. J. Mech. Eng., 48: 27-31.
    CrossRefDirect Link

  3. Yin, Z.F. and X.F. Ge, 2011. Chaotic self-motion of a spatial redundant robotic manipulator. Res. J. Applied Sci. Eng. Technol., 3: 993-999.
    Direct Link

  4. Nektarios, A. and N.A. Aspragathos, 2010. Optimal location of a general position and orientation end-effector's path relative to manipulator's base, considering velocity performance. Rob. Comput. Integr. Manuf., 26: 162-173.
    CrossRef

  5. Li, Q., L.J. Wang, B. Chen, Z. Zhou and Y.X. Yin, 2012. An improved artificial potential field method with parameters optimization based on genetic algorithms. J. Univ. Sci. Technol., 34: 202-206.
    Direct Link

  6. Klein, C.A., 1984. Use of redundancy in the design of robotic systems. Proceedings of the 2nd International Symposium of Robotics Research, August 20-23, 1984, Kyoto Japan, pp: 207-214.

  7. Khatib, O., 1986. Real-time obstacle avoidance for manipulators and mobile robots. Int. J. Robot. Res., 5: 90-98.
    CrossRefDirect Link

  8. Ye, B.Q. and Y. Wang, 2012. Research of obstacle avoidance algorithm for robot based on artificial potential field. J. Chongqing Univ. Technol., 26: 82-85.

  9. Mohri, A., X.D. Yang and M. Yamamoto, 1995. Collision free trajectory planning for manipulator using potential function. Proceedings of the IEEE International Conference on Robot and Automation, Volume 3, May 21-27, 1995, Nagoya, Japan, pp: 3069-3074.
    CrossRef

  10. Vakakis, A.F. and J.W. Burdick, 1990. Chaotic motions in the dynamics of a hopping robot. Proceedings of the IEEE International Conference on Robotics and Automation, Volume 3, May 13-18, 1990, Cincinnati, OH., USA., pp: 1464-1469.
    CrossRef

  11. Denavit, J. and R.S. Hartenberg, 1955. A kinematic notation for lower-pair mechanisms based on matrices. Trans. ASME J. Applied Mech., 23: 215-221.
    Direct Link

Leave a Comment


Your email address will not be published. Required fields are marked *

Useful Links

  • Journals
  • For Authors
  • For Referees
  • For Librarian
  • For Socities

Contact Us

Office Number 1128,
Tamani Arts Building,
Business Bay,
Deira, Dubai, UAE

Phone: +971 507 888 742
Email: [email protected]

About Science Alert

Science Alert is a technology platform and service provider for scholarly publishers, helping them to publish and distribute their content online. We provide a range of services, including hosting, design, and digital marketing, as well as analytics and other tools to help publishers understand their audience and optimize their content. Science Alert works with a wide variety of publishers, including academic societies, universities, and commercial publishers.

Follow Us
© Copyright Science Alert. All Rights Reserved