
	Journal of Applied Sciences
	Year: 2010 \| Volume: 10 \| Issue: 19 \| Page No.: 2322-2327 DOI: 10.3923/jas.2010.2322.2327

Machining of Nickel Alloy 242 with Cubic Boron Nitride Tools

H.H. Habeeb, K. Kadirgama, M.M. Noor, M.M. Rahman, B. Mohammad, R.A. Bakar and K.A. Abouel Hossein

Abstract: This study discusses the development of first and second order of surface roughness prediction model when machining Haynes 242 alloy with Cubic Boron Nitride (CBN) at dry condition. The relationship between the cutting parameters (cutting speed, axial depth and feedrate) with surface roughness are discussed. Response Surface Method (RSM) has been selected to optimize the cutting parameters and reduce the number of experiments. Surface roughness obtained in these experiments ranged from 0.052-0.08 μm, which consider as an extremely fine finish. Increase in cutting speed from 70 to 300 m min^-1, the roughness getting finer. On other hand, increase in feedrate (0.1 to 0.3 mm tooth^-1) and axial depth (0.025 to 0.075 mm) surface roughness become rougher.

PDF Fulltext XML References Citation Report Citation

RELATED ARTICLES:

•	Energy Cost Modeling for High Speed Hard Turning

How to cite this article:

H.H. Habeeb, K. Kadirgama, M.M. Noor, M.M. Rahman, B. Mohammad, R.A. Bakar and K.A. Abouel Hossein, 2010. Machining of Nickel Alloy 242 with Cubic Boron Nitride Tools. Journal of Applied Sciences, 10: 2322-2327.

DOI: 10.3923/jas.2010.2322.2327

URL: https://scialert.net/abstract/?doi=jas.2010.2322.2327

COMMENTS

09 February, 2017
Gajendra Mehta:
Inconel grades are harder to machine due to high nickel content. The Inconel family of alloys are built to sustain harsh environments. Siddhagiri Metals and Tubes.

REPLY

COMMENT ON THIS PAPER

Navigation


		Online First
		Current Issue
		Previous Issues
		Editorial Board
		Submit a Manuscript
		Guide to Authors
		Subscribe to E-alerts

Indexed In


		AGRIS
		ASCI-Database
		Asian Digital Library
		Chemical Abstract Services
		Google Scholar

Science Alert