Jin-Ling Cao
School of Energy Engineering, Yulin College, 719000, China
Ying Luo
School of Energy Engineering, Yulin College, 719000, China
ABSTRACT
The article studied the vibration resistance of spindle system in grinding head of roller grinding machine by means of harmonic response and modal analysis, the system modal analysis use the method of the transfer matrix, obtained the first five orders of the natural frequency of spindle system, calculated the natural frequency of spindle system by the displacement-frequency curve of the spindle system harmonic response. By studying the M84100A type spindle system in grinding head of roller grinding machine, obtained the conclusion that the natural frequency was far from the work frequency, so laid a foundation of the spindle system dynamic design.
PDF References Citation
Received: August 05, 2013;
Accepted: November 06, 2013;
Published: November 13, 2013
How to cite this article
Jin-Ling Cao and Ying Luo, 2013. Research on Static and Dynamic Performance of Spindle System of the Grinding Head. Journal of Applied Sciences, 13: 5250-5254.
DOI: 10.3923/jas.2013.5250.5254
URL: https://scialert.net/abstract/?doi=jas.2013.5250.5254
DOI: 10.3923/jas.2013.5250.5254
URL: https://scialert.net/abstract/?doi=jas.2013.5250.5254
REFERENCES
- Mansor, A.A., W.M.N. Wan Kadir, T. Anwar and H. Elias, 2012. An adaptive policy-based approach for static and dynamic policy conflict detection: An implementation of location-based system. Int. J. Digital Content Technol. Appl., 6: 277-286.
Direct Link - Rehorn, A.G., J. Jiang, P.E. Orban and E. Bordatchev, 2004. Modelling and experimental investigation of spindle and cutter dynamics for a high-precision machining center. Int. J. Adv. Manuf. Technol., 24: 806-815.
CrossRef - Ast, A., S. Braun, P. Eberhard and U. Heisel, 2009. An adaptronic approach to active vibration control of machine tools with parallel kinematics. Prod. Eng., 3: 207-215.
CrossRef - Boyaci, A., H. Hetzler, W. Seemann, C. Proppe and J. Wauer, 2009. Analytical bifurcation analysis of a rotor supported by floating ring bearings. Nonlinear Dyn., 57: 497-507.
CrossRef - Gao, S.H., X.H. Long and G. Meng, 2008. Nonlinear response and nonsmooth bifurcations of an unbalanced machine-tool spindle-bearing system. Nonlinear Dyn., 54: 365-377.
CrossRef - Li, G., 2003. Different geometric configurations research of high speed hybrid bearings. J. Hunan Univ. Arts Sci., 3: 40-43.
Direct Link - Jin, T. and G.Q. Cai, 2002. Analytical thermal models of oblique moving heat source for deep grinding and cutting. J. Manuf. Sci. Eng., 123: 185-190.
CrossRef - Yin, L., H. Huang, K. Ramesh and T. Haung, 2005. High speed versus conventional grinding in high removal rate machining of alumina and alumina-titania. Int. J. Mach. Tools Manuf., 45: 897-907.
CrossRefDirect Link - Wu, X.H., Y.L. Yuan, W.W. Zhu and J. Guo, 2012. Impact loss evaluation of terrorism disasters based on input-output model. J. Convergence Inform. Technol., 7: 811-819.
CrossRef