Wang Gang
School of Mechanical Engineering and Automation, Beihang, University, Beijing, 100083, People�s Republic of China
Yun chao
School of Mechanical Engineering and Automation, Beihang, University, Beijing, 100083, People�s Republic of China
ABSTRACT
This study presents a novel common approach to analysis the transmission angle of a type of manipulators. Here, two types of transmission angles are defined to evaluate the kinematic performance of parallel manipulators, with which the direct and indirect singularities can be identified in a straightforward manner. The relationships between the angles and condition number of Jacobian which is a vital performance index for parallel manipulators are investigated throughout the workspace by taking both the Diamond and Delta parallel manipulators as an example. A simple method for determining the workspace bounded by the angle constraints is proposed which make less time be cost in the optimization or any other design procedure. Considering the effects of transmission angles, a global and comprehensive index is presented. The kinematic optimization of Diamond manipulator has been taken as an example to illustrate the effectiveness of this approach.
PDF References Citation
How to cite this article
Wang Gang and Yun chao, 2013. Transmission Angle Analysis in a Type of Manipulators. Journal of Applied Sciences, 13: 4863-4868.
DOI: 10.3923/jas.2013.4863.4868
URL: https://scialert.net/abstract/?doi=jas.2013.4863.4868
DOI: 10.3923/jas.2013.4863.4868
URL: https://scialert.net/abstract/?doi=jas.2013.4863.4868
REFERENCES
- Gosselin, C. and J. Angeles, 1988. The optimum kinematic design of planar three-degree-of-freedom parallel manipulators. J. Mech. Trans. Autom., 110: 35-41.
CrossRef - Gosselin, C. and J. Angeles, 1989. The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator. J. Mech. Trans. Autom., 111: 202-207.
CrossRef - Gosselin, C. and J. Angeles, 1991. A global performance index for the kinematic optimization of robotic manipulators. J. Mech. Des., 113: 220-226.
CrossRefDirect Link - Alici, G., 2002. An inverse position analysis of five-bar planar parallel manipulators. Robotica, 20: 195-201.
CrossRef - Cervantes-Sanchez, J.J., J.C. Hernandez-Rodriguez and J.G. Rendon-Sanchez, 2000. On the workspace, assembly configurations and singularity curves of the RRRRR-type planar manipulator. Mech. Mach. Theory, 35: 1117-1139.
CrossRef - Miller, K., 2002. Maximization of workspace volume of 3-DOF spatial parallel manipulators. J. Mech. Des., 124: 347-350.
CrossRef