Citation to this article as recorded by
Influence on machinability and form tolerance of Inconel 718 in
Edm using different diameter multi hole Cu electrodes SN Applied Sciences Vol. 1, Issue 5, , 2019 |
Multi-objective optimization of EDM process for titanium alloy Materials Today: Proceedings |
Improvement of process performance of powder mixed electrical discharge machining by optimisation -A Review Advances in Materials and Processing Technologies |
Material Removal Rate, Electrode Wear Rate, and Surface Roughness
Evaluation in Die Sinking EDM with Hollow Tool through Response Surface
Methodology International Journal of Manufacturing Engineering |
Technological Innovations in Machining of Inconel
718 International Journal of Manufacturing, Materials, and Mechanical Engineering Vol. 5, Issue 2, 17, 2015 |
Alloy Inconel 718 by 3D Micro-Electro Discharge
Machining Applied Mechanics and Materials |
How to cite this article
R. Manikandan and R. Venkatesan, 2012. Optimizing the Machining Parameters of Micro-EDM for Inconel 718. Journal of Applied Sciences, 12: 971-977.
DOI: 10.3923/jas.2012.971.977
URL: https://scialert.net/abstract/?doi=jas.2012.971.977
DOI: 10.3923/jas.2012.971.977
URL: https://scialert.net/abstract/?doi=jas.2012.971.977