Citations in impact factor journals
Optimization of process parameters by Taguchi robust design method for the development of nano-crystals of sirolimus using sonication based crystallization Crystal Research and Technology |
Pathological effects of graded doses of aflatoxin B1 on the development of the testes in juvenile white leghorn males Environmental Science and Pollution Research |
Preparation, surface characterization and performance of a Fischer-Tropsch catalyst of cobalt supported on silica nanosprings Applied Surface Science |
An improved non-crosslinking gold nanoprobe-NASBA based on 16S rRNA for rapid discriminative bio-sensing of major salmonellosis pathogens Biosensors and Bioelectronics |
A TOPSIS-based Taguchi optimization to determine optimal mixture proportions of the high strength self-compacting concrete Chemometrics and Intelligent Laboratory Systems |
Multi-response optimization of polymer blended concrete: A TOPSIS
based Taguchi application Construction and Building Materials |
Antiobesity potential of ursolic acid stearoyl glucoside by inhibiting pancreatic lipase European Journal of Pharmacology Vol. 709, Issue 1-3, 28, 2013 |
Panorama of biogenic nano-fertilizers: A road to sustainable agriculture Environmental Research |
Minimizing geometric isomerization of α-cypermethrin in the residue analysis Food Chemistry |
Characterization of fig achenes’ oil of Ficus carica grown in Tunisia Food Chemistry |
Multi objective optimization using different methods of assigning
weights to energy consumption responses, surface roughness and material removal
rate during rough turning operation Journal of Cleaner Production |
Multi-response optimisation of micro-milling parameters through
GRA, TOPSIS and Taguchi techniques to increase production rate while reducing
energy consumption Measurement |
An exploratory analysis for erosion wear behavior of filler materials of hybrid composites: A De Novo approach Measurement |
Multi-response optimisation of micro-milling performance while machining a novel magnesium alloy and its alumina composites Measurement |
Exploring current scenario and developments in the field of microbial L-asparaginase production and applications: A review Process Biochemistry |
Phenotypic plasticity in Cucurbita maxima and C. moschata seedlings as a measure of drought stress tolerance under pot screening South African Journal of Botany |
Carbon dioxide at an unpolluted site analysed with the smoothing kernel method and skewed distributions Science of The Total Environment |
High-intensity ultrasound-based process strategies for obtaining edible sunflower (Helianthus annuus L.) flour with low-phenolic and high-protein content Ultrasonics Sonochemistry |
Effect of Integrated Nutrient Management on Rice Yield, Soil Nutrient Profile and Cyanobacterial Nitrogenase Activity under Rice-Wheat Cropping System Communications in Soil Science and Plant Analysis |
Effect of Phosphorus in Alleviation Adverse Impacts of Salinity on Wheat Grown on Different Soils Communications in Soil Science and Plant Analysis |
Microbial Diversity in High Arsenic Groundwater in Hetao Basin of Inner Mongolia, China Geomicrobiology Journal |
Application of integrated Taguchi and TOPSIS method for
optimization of process parameters for dimensional accuracy in turning of EN25
steel Journal of the Chinese Institute of Engineers |
Blackleg disease of canola mitigated by resistant cultivars and four-year crop rotations in western Canada Canadian Journal of Plant Pathology Vol. 35, Issue 2, 209, 2013 |
Multiresponse Optimization of Abrasive Water Jet Cutting Process Parameters Using TOPSIS Approach Materials and Manufacturing Processes |
Experimental investigation of dry, wet and cryogenic boring of AA
7075 alloy Materials and Manufacturing Processes |
Antioxidant potential and factors influencing the content of antioxidant compounds of pepper: A review with current knowledge Comprehensive Reviews in Food Science and Food Safety |
Optimization of light/dark cycle in an extended photoperiod‐based speed breeding protocol for grain legumes Plant Breeding |
Citation to this article as recorded by
Cao, X. and W.L. Cleghorn, 2011. Parametric optimization of an eight-bar mechanism of a wheel loader based on simulation. Inform. Technol. J., 10: 1801-1808. CrossRefDirect Link |
Feng, X., X. Qian and Q. Wu, 2012. A DS-AHP approach for Multi-attribute decision making problem with intuitionistic fuzzy information. Inform. Technol. J., 11: 1764-1769. CrossRef |
Hsieh, K.L., 2010. Employing artificial neural networks into achieving parameter optimization of multi-response problem with different importance degree consideration. Inform. Technol. J., 9: 918-926. CrossRefDirect Link |
Citation to this article as recorded by
Recent Trends in Mechanical Engineering Lecture Notes in Mechanical Engineering |
Application of JAYA algorithm for the optimization of machining
performance characteristics during the turning of CFRP (epoxy) composites:
comparison with TLBO, GA, and ICA Engineering with Computers Vol. 33, Issue 3, 457, 2017 |
A Scoping Review on the Applications of MCDM Techniques for Parametric Optimization of Machining Processes Archives of Computational Methods in Engineering |
Analysis of the manufacturing flexibility parameters with effective performance metrics: a new interactive approach based on modified TOPSIS-Taguchi method International Journal on Interactive Design and Manufacturing (IJIDeM) |
Application of GRA and TOPSIS Optimization Techniques in GTA
Welding of 15CDV6 Aerospace Material Transactions of the Indian Institute of Metals |
Optimization of Turning Parameters of Machining Incoloy 800H
Superalloy Using Cryogenically Treated Multilayer CVD-Coated
Tool Arabian Journal for Science and Engineering |
Building a Graphical User Interface for Concrete Production
Processes: A Combined Application of Statistical Process Control and Design of
Experiment Arabian Journal for Science and Engineering |
Hybrid fused filament fabrication for manufacturing of Al microfilm reinforced PLA structures Journal of the Brazilian Society of Mechanical Sciences and Engineering Vol. 42, Issue 9, , 2020 |
Optimization of mix proportions for high performance concrete using TOPSIS method Journal of Building Pathology and Rehabilitation Vol. 6, Issue 1, , 2021 |
Multi-response Optimization of Wire EDM of Inconel 718 Using a Hybrid Entropy Weighted GRA-TOPSIS Method Process Integration and Optimization for Sustainability |
Synthesis, characterization and antibacterial analysis of polyaniline/Au–Pd nanocomposite Colloids and Surfaces A: Physicochemical and Engineering Aspects |
A laboratory evaluation of factors affecting rutting resistance of asphalt mixtures using wheel tracking test Case Studies in Construction Materials |
Functional food consumption and depression among the elderly — What can we learn from a longitudinal survey? Economic Modelling |
Multi-attribute optimization of machining process parameters in
powder mixed electro-discharge machining using TOPSIS and grey relational
analysis Engineering Science and Technology, an International Journal Vol. 19, Issue 1, 62, 2016 |
Characterization and machining studies of nano borosilicate particles reinforced aluminium alloy composites using AWJM process Journal of Materials Research and Technology |
Towards recent tendencies in drilling fluids: application of carbon-based nanomaterials Journal of Materials Research and Technology |
Taguchi-TOPSIS based HOG parameter selection for complex background sign language recognition Journal of Visual Communication and Image Representation |
An experimental investigation with minimum quantity lubrication
and its comparison with various vegetable oil based cutting fluids during
turning Materials Today: Proceedings Vol. 4, Issue 8, 8758, 2017 |
Parameter Design And Analysis In Laser Welding Of NiTinol Shape
Memory Alloy Materials Today: Proceedings Vol. 4, Issue 8, 8883, 2017 |
Optimization of Glass fiber and MoS2 Filled PTFE Composites Using Non Traditional Optimization Techniques Materials Today: Proceedings Vol. 5, Issue 2, 7310, 2018 |
An anatomization of concrete elements with Taguchi optimization method Materials Today: Proceedings |
Effect on abrasive water jet machining of aluminum alloy 7475 composites reinforced with CNT particles Materials Today: Proceedings |
Investigation on the parameter optimization and performance of
laser cladding a gradient composite coating by a mixed powder of Co50 and Ni/WC
on 20CrMnTi low carbon alloy steel Optics & Laser Technology |
Electrochemical determination of berberine at a multi-walled carbon nanotubes-modified glassy carbon electrode Sensors and Actuators B: Chemical |
Preliminary observations on the blood plasma composition of sobaity sea-bream (Sparidentex hasta) from the Persian Gulf during the spawning season Marine Biodiversity Records |
Process Parameter Optimization for Abrasive Water Jet
Machining of Titanium Alloy Using Meta-Heuristic Algorithms MATEC Web of Conferences |
The equivalent resistance of a 3 ×ncobweb network and its conjecture of anm×ncobweb network Journal of Physics A: Mathematical and Theoretical Vol. 46, Issue 19, 195202, 2013 |
Parametric optimization of fused deposition modelling process using Grey based Taguchi and TOPSIS methods for an automotive component Rapid Prototyping Journal Vol. 27, Issue 1, 155, 2021 |
Optimization of machining parameters under MQL turning of Ti-6Al-4V alloy with textured tool using multi-attribute decision-making methods World Journal of Engineering Vol. 16, Issue 5, 648, 2019 |
Nutritional status and quality of life in patients with acute leukaemia prior to and after induction chemotherapy in three hospitals in Tehran, Iran: a prospective study Journal of Human Nutrition and Dietetics |
Hepatitis delta virus infection prevalence, diagnosis and treatment in the Middle East: A scoping review Liver International |
A New Method to Easily Assess Bacteriostatic and Bactericidal Activity of Ultraviolet Radiation Using Quantitative Image Analysis Photochemistry and Photobiology |
Multi‐response optimization of process parameters for remediation of tetrachloroethylene pools by surfactants: Application of Taguchi design of experiment and Artificial Neural Network Water and Environment Journal |
OPTIMIZATION OF TURNING PARAMETERS FOR SURFACE INTEGRITY
PROPERTIES ON INCOLOY 800H SUPERALLOY USING CRYOGENICALLY TREATED MULTI-LAYER
CVD COATED TOOL Surface Review and Letters |
Process parameters optimization for friction vibration joining of Polypropylene/Spheri glass composites using TOPSIS Surface Review and Letters |
Through hole making by electro-discharge machining on Inconel 625
super alloy using hollow copper tool electrode Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
Selection of Heat Transfer Fluids for Solar Thermal Applications Using Multi-Criteria Decision-Making Tools Journal of Testing and Evaluation Vol. 48, Issue 1, 20180539, 2020 |
Optimization of Process Parameters of Epoxy Granite for Strength
and Damping Characteristics Using TOPSIS Method Journal of Testing and Evaluation Vol. 49, Issue 3, 20190002, 2021 |
A SYSTEMATIC PERSPECTIVE ON SUPPLY CHAIN IMPROVEMENT BY USING LEAN SIX SIGMA AND AN IMPLEMENTATION AT A FERTILIZER COMPANY Elektronik Sosyal Bilimler Dergisi Vol. 18, Issue 71, 1377, 2019 |
Tıbbi Adaçayı (Salvia officinalis )'nın İn vitro Çoğaltımı Üzerine Temel Besin Ortamlarının ve Büyüme Düzenleyici Tiplerinin Etkisi Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi Vol. 26, Issue 3, 600, 2023 |
Zooplankton Fauna of High Mountain Lake: Sarıncof (Çamlıhemşin, Rize, Turkey) Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi Vol. 26, Issue 3, 673, 2023 |
Germination and Growth Parameters in Sorghum Cultivars (Sorghum bicolor L.) Effected by Boron Application under Salinity Stress Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi Vol. 26, Issue 3, 629, 2023 |
The Effect of Sumac Juice Given to Broilers by Drinking and Inhalation on Performance, Immunity Response and Some Blood Parameters Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi Vol. 26, Issue 3, 702, 2023 |
Effects of Grape Marc on Vase Life of Carnation Flowers Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi Vol. 26, Issue 3, 531, 2023 |
Bazı Bitkisel Kökenli Uçucu Yağların Amerikan Hamamböceği (Periplaneta americana L.) Erginlerine Karşı Ölüm Etkisi Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi Vol. 26, Issue 3, 579, 2023 |
Monoamine Oxidase Inhibitory Effects of Medicinal Plants in Management of Alzheimer's Disease Journal of the Turkish Chemical Society Section A: Chemistry Vol. 8, Issue 1, 239, 2021 |
Regioselective Synthesis of Some Rhamnopyranoside Esters for PASS Predication, and ADMET Studies Journal of the Turkish Chemical Society Section A: Chemistry Vol. 8, Issue 1, 363, 2021 |
Ferula (Ferula gummosa Boiss.) Meyvelerinde Uçucu ve Sabit Yağ Verimleri ile Bileşenlerinin Belirlenmesi Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol. 24, Issue 3, 526, 2020 |
Ekmeklik buğdayda (Triticum aestivum L.) Rus buğday afidine dayanıklılık geninin ayrıntılı genetik haritalaması Ege Üniversitesi Ziraat Fakültesi Dergisi Vol. 58, Issue 4, 523, 2021 |
Farklı biçim yüksekliği ve azot seviyelerinin dev kralotu (Pennisetum hybridum)’nda yem verimi ve kalitesine olan etkileri Ege Üniversitesi Ziraat Fakültesi Dergisi Vol. 59, Issue 1, 107, 2022 |
İnsan Kaynakları Departmanı için Etmen Tabanlı Sistem Tasarımı Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi Vol. 35, Issue 2, 325, 2020 |
Investigation of Surface Roughness and Material Removal Rate on Machining of TIB2 Reinforced Aluminum 6063 Composites: A Taguchi’s Approach Mechanics and Mechanical Engineering Vol. 22, Issue 4, 1319, 2018 |
Multi-Objective Optimization of Process Parameters for Powder Mixed Electrical Discharge Machining of Inconel X-750 Alloy Using Taguchi-Topsis Approach Strojnícky časopis - Journal of Mechanical Engineering Vol. 71, Issue 1, 1, 2021 |
Ana ve ikinci ürün koşullarında yetiştirilen susam (Sesamum indicum L.) çeşitlerinin bazı önemli tarımsal ve kalite özelliklerinin karşılaştırılması Harran Tarım ve Gıda Bilimleri Dergisi Vol. 26, Issue 3, 358, 2022 |
Biyoreaktörde Bacillus pumilus ile Pektinaz Enzimlerinin Üretimi ve Karıştırma ve Hava Akış Hızının Etkisinin İncelenmesi International Journal of Pure and Applied Sciences Vol. 8, Issue 1, 239, 2022 |
Pretreatment Effect on Amelioration of Seed Germination of Zollinger’s Indigo (Indigofera zollingeriana Miq.) Yüzüncü Yıl Üniversitesi Tarım Bilimleri Dergisi Vol. 30, Issue 1, 1, 2020 |
Kısıtlı Sulama Koşullarında Yetiştirilen Hıyarın Verim ve Bazı Kalite Özelliklerine Waterpad Polimer Uygulamasının Etkisi Türk Tarım ve Doğa Bilimleri Dergisi Vol. 7, Issue 4, 1031, 2020 |
Nonpatojen Fusarium spp.'lerinin Nohutta Fusarium Solgunluğuna Karşı in vitro Koşullarda Antagonist Etkilerinin Belirlenmesi Türk Tarım ve Doğa Bilimleri Dergisi Vol. 7, Issue 3, 775, 2020 |
Occurrence of Cucumber mosaic cucumovirus and Watermelon mosaic potyvirus on Melon exhibiting viral symptoms in Bingöl province of Turkey and Their Phylogenetic Affinities Türk Tarım ve Doğa Bilimleri Dergisi Vol. 7, Issue 4, 948, 2020 |
Effect of Different Organic Fertilizers on Bread Wheat (Triticum aestivum L.) Productivity International Journal of Agriculture Environment and Food Sciences Vol. 5, Issue 4, 433, 2021 |
Amata (Syntomis) caspia (Staudinger, 1877) (Lepidoptera: Erebidae)’nın Dış ve Genital Morfolojisi ile Biyoekolojisi Üzerinde Bazı Gözlemler Karadeniz Fen Bilimleri Dergisi Vol. 12, Issue 2, 605, 2022 |
Pyridylnidulin exerts anti-diabetic properties and improves non-alcoholic fatty liver disease in diet-induced obesity mice Frontiers in Molecular Biosciences |
Using Spatial Justice in Urban Planning with The Systemic Thinking Approach Gazi University Journal of Science Vol. 36, Issue 2, 482, 2023 |
Investigation of the Importance of Machine Sequence Flexibility on A Flexible Manufacturing System Performance Gazi University Journal of Science Vol. 36, Issue 2, 735, 2023 |
Hatay ilinde yetişen Cucurbitaceae familyasına ait kültür bitkilerinde bazı virüslerin DAS-ELISA ve RT-PCR yöntemleriyle saptanması ve moleküler karakterizasyonu Mustafa Kemal Üniversitesi Tarım Bilimleri Dergisi Vol. 27, Issue 3, 424, 2022 |
Employing Artificial Neural Networks into Achieving Parameter Optimization of Multi-Response Problem with Different Importance Degree Consideration Information Technology Journal Vol. 9, Issue 5, 918, 2010 |
Parametric Optimization of an Eight-bar Mechanism of a Wheel Loader Based on Simulation Information Technology Journal Vol. 10, Issue 9, 1801, 2011 |
Effect of Antiepileptic Drug Sodium Valproate on Stomach Tissue Glycoproteins: The Protective Role of Moringa Extract Archives Of Epilepsy Vol. 29, Issue 2, 41, 2023 |
Rhizospheric PGPR Strains of Wheat, Barley and Trefoil Grown in Ağrı Province Türk Doğa ve Fen Dergisi Vol. 10, Issue 2, 182, 2021 |
Traditional Uses of Some Food Plants in Suruç (Şanlıurfa, Turkey) Türk Doğa ve Fen Dergisi Vol. 11, Issue 1, 59, 2022 |
Antalya İli Kaş İlçesinde Sebze Üreticilerinin Mali Durumunu ve Gelirlerini Etkileyen Faktörler Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol. 5, Issue 2, 729, 2022 |
Incidental findings detected on magnetic resonance imaging scans of the cervical, thoracic and lumbar spine of patients prediagnosed with discopathy Marmara Medical Journal Vol. 36, Issue 2, 210, 2023 |
How to cite this article
Tian-Syung Lan , 2009. Taguchi Optimization of Multi-Objective CNC Machining Using TOPSIS. Information Technology Journal, 8: 917-922.
DOI: 10.3923/itj.2009.917.922
URL: https://scialert.net/abstract/?doi=itj.2009.917.922
DOI: 10.3923/itj.2009.917.922
URL: https://scialert.net/abstract/?doi=itj.2009.917.922