Journal of Applied Sciences1812-56541812-5662Asian Network for Scientific Information10.3923/jas.2008.2333.2336Capsicum annuum) as Raw Material for Particleboard Manufacturing]]>GuntekinErgun UnerBirol Turgut SahinH. KarakusBeyhan 122008812The aim of this study was to investigate possible feasibility of pepper
stalks in the production of particleboard. Chemical composition and fiber
properties of the pepper stalks were determined and three-layer experimental
particleboards with density of 0.53, 0.63 and 0.73 g cm3 were manufactured
from pepper stalks using certain ratios of Urea Formaldehyde (UF) and
Melamine Urea Formaldehyde (MUF) adhesives. Some physical and mechanical
properties of the boards were tested. The experimental results have shown
that production of general purpose and furniture grade particleboard used
in dry conditions using pepper stalks is technically feasible. The results
of the study demonstrated that pepper stalks can be an alternative raw
material for particleboard industry.]]>Alma, M.H., H. Kalaycoglu, I. Bektas and A. Tutus,200522141149Batalla, L., A.J. Nunez and N.E. Marcovich,200597916923Bektas, I., C. Guler, H. Kalaycioglu, F. Mengenoglu and M. Nacar,2005Helianthus annuus I.) and poplar wood (Populus alba L.).]]>39467473Copur, Y., C. Guler, M. Akgul and C. Tascioglu,20074225682572Eroglu, H., 1988 Fengel, D. and G. Wegener, 1984Gencer, A.,1998Gossypium hirsitum L.).]]>1998Grigoriou, A., C. Passialis and E. Voulgaridis,200058309314Grigoriou, A., C. Passialis and E. Voulgaridis,200058290291Guler, C. and R. Ozen,2004Gossypium hirsitum L.).]]>624043Gultekin, H.A., 20042004Guntekin, E. and B. Karakus,2008Solanum molengena) stalks in the production of experimental particleboard.]]>27354358Ndazi, B., J.V. Tesha and E.T.N. Nisanda,20064169846990Nemli, G., H. Kalaycioglu and T. Alp,200159411412Ntalos, G.A. and A.H. Grigoriou,2002165968Papadopoulos, A.N., C.A.S. Hill, A. Gkaraveli, G.A. Ntalos and S.P. Karastergiou,2004Bambusa vulgaris) as an alternative lignocellulosic raw material for particleboard manufacture.]]>623639Sahin, H.T. and R.A. Young, 2008282428Seniz, V., 2004Tank, T., 1980Tappi, 19881988Tröger, F., G. Wegener and C. Seman,19988113121TS-EN 310, 19991999TS-EN 317, 19991999TS-EN 319, 19991999TS-EN 312-2, 19991999Xu, J., R. Sugawara, R. Widyorini, G. Han and S. Kawai,2004506267Younquist, J.A., B.E. English, R.C. Scharmer, P. Chow and S.R. Shook, 19941994Zhang, Y., X. Lu, A. Pizzi and L. Delmotte,2003614954