Citations in impact factor journals
Insights into the genetic structure of the cowpea pest Callosobruchus maculatus in Africa Journal of Pest Science |
Effect of carbon nanotubes upon emissions from cutting and sanding carbon fiber-epoxy composites Journal of Nanoparticle Research Vol. 17, Issue 8, , 2015 |
Sprout suppression on potato: need to look beyond CIPC for more effective and safer alternatives Journal of Food Science and Technology |
Adsorptive removal of cadmium from aqueous solution by cork biomass: Equilibrium, dynamic and thermodynamic studies Arabian Journal of Chemistry |
Bioethanol production from carbohydrate-enriched residual biomass obtained after lipid extraction of Chlorella sp. KR-1 Bioresource Technology |
Persian Gulf desalination using air gap membrane distillation: Numerical simulation and theoretical study Desalination |
Two-dimensional proteomic analysis of gonads of air-breathing catfish, Clarias batrachus after the exposure of endosulfan and malathion Environmental Toxicology and Pharmacology Vol. 37, Issue 3, 1006, 2014 |
Purification of polygalacturonases produced by Aspergillus niger using an aqueous two-phase system Fluid Phase Equilibria |
Antifungal effect of antimicrobial peptides (AMPs LR14) derived from Lactobacillus plantarum strain LR/14 and their applications in prevention of grain spoilage Food Microbiology |
Evaluating food additives as antifungal agents against Monilinia fructicola in vitro and in hydroxypropyl methylcellulose–lipid composite edible coatings for plums International Journal of Food Microbiology |
Effect on performance and emissions of a dual fuel diesel engine using hydrogen and producer gas as secondary fuels International Journal of Hydrogen Energy |
Integration of purple non-sulfur bacteria into the starch-hydrolyzing consortium International Journal of Hydrogen Energy |
Pyrolysis of ethanol coproducts Industrial Crops and Products |
Aerated vs non-aerated conversions of molasses and olive mill wastewaters blends into bioethanol by Saccharomyces cerevisiae under non-aseptic conditions Industrial Crops and Products |
Techno-economic modeling of a corn based ethanol plant in 2011/2012 Industrial Crops and Products |
The essential oil of Dodonaea viscosa leaves is allelopathic to rosemary (Rosmarinus officinalis L.) Industrial Crops and Products |
Antioxidant potential and vasodilatory activity of fermented beverages of jabuticaba berry (Myrciaria jaboticaba) Journal of Functional Foods |
Pomegranate juice functional constituents after alcoholic and acetic acid fermentation Journal of Functional Foods |
Effects of saffron extract and crocin on anthropometrical, nutritional and lipid profile parameters of rats fed a high fat diet Journal of Functional Foods |
Combined effect of ultrasound, mild heat shock and citric acid to retain greenness, nutritional and microbiological quality of minimally processed broccoli (Brassica oleracea L.): An optimization study Postharvest Biology and Technology |
Screening for hydroxynitrile lyase activity in non-commercialised plants South African Journal of Botany |
Ontogenic development and structure of the embryo, seed, and fruit of Jatropha curcas L. (Euphorbiaceae) South African Journal of Botany |
Microbial ecology, bacterial pathogens, and antibiotic resistant genes in swine manure wastewater as influenced by three swine management systems Water Research |
Translating removal efficiencies into operational performance indices of wastewater treatment plants Water Research |
Wear resistance of CVD and PVD multilayer coatings when dry cutting fiber reinforced polymers (FRP) Wear Vol. 302, Issue 1-2, 946, 2013 |
Wear characteristics of polycrystalline diamond tools in
orthogonal cutting of CFRP/Ti stacks Wear |
Evaluation of the Influence of Diethyl Ether (DEE) Addition on Selected Physicochemical Properties of Diesel Oil and Ignition Delay Period Energy & Fuels Vol. 28, Issue 4, 2608, 2014 |
Protective efficacy of Nigella sativa
seeds and oil against columnaris disease in fishes Journal of Fish Diseases |
Randomized Binomial Tree and Pricing of American-Style Options Mathematical Problems in Engineering |
Activity of Porophyllum ruderale leaf extract and 670-nm InGaP laser during burns repair in rats BMC Complementary and Alternative Medicine Vol. 15, Issue 1, , 2015 |
Citation to this article as recorded by
Analysis of Genetic Diversity and Population Structure in Horsegram (Macrotyloma uniflorum) Using RAPD and ISSR Markers Agricultural Research Vol. 4, Issue 3, 221, 2015 |
Yellow Laccase-Mediated Lignin Degradation of Ricinus communis: A Future Agricultural Biomass for Biofuel Production Agricultural Research Vol. 4, Issue 3, 309, 2015 |
The anti-diabetic potential of polysaccharides extracted from members of the cucurbit family: A review Bioactive Carbohydrates and Dietary Fibre Vol. 3, Issue 2, 106, 2014 |
Water and energy integration: A comprehensive literature review of non-isothermal water network synthesis Computers & Chemical Engineering |
Hypoglycemic and hypolipidemic effect of Allopolyherbal formulations in streptozotocin induced diabetes mellitus in rats International Journal of Diabetes Mellitus Vol. 3, Issue 1, 45, 2015 |
Rigorous treatment of dry cutting of FRP – Interface consumption concept: A review International Journal of Mechanical Sciences |
Effect of annealing temperature on structural, electrical and optical properties of spray pyrolytic nanocrystalline CdO thin films Materials Science in Semiconductor Processing |
Overproduction of reactive oxygen species involved in the pathogenicity of Fusarium in potato tubers Physiological and Molecular Plant Pathology |
Experimental Studies on the Cutting Characteristics of Hybrid
CFRP/Ti Stacks Procedia Manufacturing |
Modeling of a natural lipstick formulation using an artificial neural network RSC Adv. Vol. 5, Issue 84, 68632, 2015 |
Uranium removal from aqueous solutions by adsorption on Aleppo pine sawdust, modified by NaOH and neutron irradiation Desalination and Water Treatment |
Study on Thixojoining Process Using Partial Remelting Method Advances in Materials Science and Engineering |
A Review of Structural Performance of Oil Palm Empty Fruit Bunch Fiber in Polymer Composites Advances in Materials Science and Engineering |
Standardization of Tragopogon graminifolius DC. Extract Based on Phenolic Compounds and Antioxidant Activity Journal of Chemistry |
Determination of Phthalate Plasticisers in Palm Oil Using Online Solid Phase Extraction-Liquid Chromatography (SPE-LC) Journal of Chemistry |
Colorful World of Microbes: Carotenoids and Their Applications Advances in Biology |
A Study of Cutting Temperatures in Turning
Carbon-Fiber-Reinforced-Plastic (CRFP) Composites with Nose Radius Worn
Tools Polymers and Polymer Composites Vol. 26, Issue 1, 19, 2018 |
Effect of Cutting Revolution Speed on Cutting
Temperature in Helical Milling of CFRP Composite Laminates Key Engineering Materials |
Stability in Higher Level Taxonomy of Miocene Bovid Faunas of the Siwaliks Annales Zoologici Fennici Vol. 51, Issue 1-2, 49, 2014 |
How to cite this article
Chung-Shin Chang, Je-Ee Ho, Chang-Hu Chan and Baw-Chiang Hwang, 2011. Prediction of Cutting Temperatures in Turning Carbon Fiber Reinforced Plastics Composites with Worn Tools. Journal of Applied Sciences, 11: 3698-3707.
DOI: 10.3923/jas.2011.3698.3707
URL: https://scialert.net/abstract/?doi=jas.2011.3698.3707
DOI: 10.3923/jas.2011.3698.3707
URL: https://scialert.net/abstract/?doi=jas.2011.3698.3707