Citations in impact factor journals
The effect of the heat input energy on the tensile properties of the AH-40 fatigue crack arrester steel, welded by the use of the robotic metal-cored arc welding technique The International Journal of Advanced Manufacturing Technology Vol. 93, Issue 9-12, 3967, 2017 |
Simulation and parameter optimization of flux cored arc welding
using artificial neural network and particle swarm optimization
algorithm Journal of Intelligent Manufacturing Vol. 25, Issue 1, 67, 2014 |
Citation to this article as recorded by
Zakeri, E., Y. Bazargan-Lari and M. Eghtesad, 2012. Simultaneous control of GMAW process and SCARA robot in tracking a circular path via a cascade approach. Trends Applied Sci. Res., 7: 845-858. CrossRefDirect Link |
Citation to this article as recorded by
Flux cored arc welding on 30MnB5 steels used in agricultural mechanisation: microstructure evolutions and mechanical properties Sādhanā Vol. 46, Issue 3, , 2021 |
Flux Cored Arc Welding Parameter Optimization Using Particle Swarm Optimization Algorithm Procedia Engineering |
Modeling and optimization of flux cored arc welding by genetic algorithm and simulated annealing algorithm Multidiscipline Modeling in Materials and Structures Vol. 9, Issue 3, 307, 2013 |
Structural Investigation and Control of Multi-Pass Gas-Shielded
Flux-Cored Arc Weldments Materials Performance and Characterization Vol. 6, Issue 3, MPC20160035, 2017 |
Evaluation of the Effect of the Water in the Contact Tip on Arc
Stability and Weld Bead Geometry in Underwater Wet FCAW Soldagem & Inspeção Vol. 22, Issue 4, 401, 2017 |
Analysis of welding groove configurations on strength of
S275 structural steel welded by FCAW Journal of Polytechnic |
Effect of Additional Shielding Gas on Welding Seam Formation
during Twin Wire DP-MIG High-Speed Welding Applied Sciences Vol. 8, Issue 9, 1658, 2018 |
High-Speed Welding of Stainless Steel with Additional
Compensatory Gas Jet Blow Molten Pool Applied Sciences Vol. 8, Issue 11, 2170, 2018 |
Stability and Heat Input Controllability of Two
Different Modulations for Double-Pulse MIG Welding Applied Sciences Vol. 9, Issue 1, 127, 2019 |
Cause of Angular Distortion in Fusion Welding:
Asymmetric Cross-Sectional Profile along Thickness Materials Vol. 12, Issue 1, 58, 2018 |
How to cite this article
H.R. Ghazvinloo and A. Honarbakhsh Raouf, 2010. Effect of Gas-Shielded Flux Cored Arc Welding Parameters on Weld Width and Tensile Properties of Weld Metal in a Low Carbon Steel. Journal of Applied Sciences, 10: 658-663.
DOI: 10.3923/jas.2010.658.663
URL: https://scialert.net/abstract/?doi=jas.2010.658.663
DOI: 10.3923/jas.2010.658.663
URL: https://scialert.net/abstract/?doi=jas.2010.658.663