Citations in impact factor journals
α‐ZrP/Uracil/Cu2+ nanoparticles as an efficient catalyst in the Morita‐Baylis‐Hillman reaction Applied Organometallic Chemistry Vol. 32, Issue 10, , 2018 |
Computational optimization of engine performance and emission responses for dual fuel CI engine powered with biogas and Co3O4 nanoparticles doped biodiesel Fuel |
Production, characterization, and application of novel fungal pullulanase for fruit juice processing International Journal of Biological Macromolecules |
Influence of the surface finishing on the wear behaviour of cemented carbides worked by Electrical Discharge Machining International Journal of Refractory Metals and Hard Materials |
Physiological and biochemical effects of nanoparticulate copper, bulk copper, copper chloride, and kinetin in kidney bean (Phaseolus vulgaris) plants Science of The Total Environment |
Heavy metal accumulation in leaves and beans of cacao (Theobroma cacao L.) in major cacao growing regions in Peru Science of The Total Environment |
Life-cycle assessment of yeast-based single-cell protein production with oat processing side-stream Science of The Total Environment |
Spatio-temporal analysis of climate and irrigated vegetation cover changes and their role in lake water level depletion using a pixel-based approach and canonical correlation analysis Science of The Total Environment |
FMCW Radar for Noncontact Bridge Structure Displacement Estimation IEEE Transactions on Instrumentation and Measurement |
The Effects of Sequential Environmental and Harvest Stressors on the Sensory Characteristics of Cultured Channel Catfish (Ictalurus Punctatus) Fillets Journal of Food Science Vol. 81, Issue 8, , 2016 |
Synergetic Use of Principal Component Analysis Applied to Normed Physicochemical Measurements and GC × GC‐MS to Reveal the Stabilization Effect of Selected Essential Oils on Heated Rapeseed Oil Journal of Food Science Vol. 82, Issue 6, 1333, 2017 |
Characterization of bacteriophage HN48 and its protective effects in Nile tilapia Oreochromis niloticus against Streptococcus agalactiae infections Journal of Fish Diseases Vol. 41, Issue 10, 1477, 2018 |
Cetylpyridinium chloride direct spray treatments reduce Salmonella on cantaloupe rough surfaces Journal of Food Safety Vol. 38, Issue 4, , 2018 |
Chicken giblets and wastewater samples as possible sources of methicillin‐resistant Staphylococcus aureus: Prevalence, enterotoxin production, and antibiotic susceptibility Journal of Food Safety Vol. 38, Issue 4, , 2018 |
Citation to this article as recorded by
Phytochemical, Free Radical Scavenging and Antifungal Profile of Cuscuta campestrisYunck. Seeds Chemistry & Biodiversity Vol. 15, Issue 8, , 2018 |
Allelopathic Effect of Eucalyptus citriodora Essential Oil and Its Potential Use as Bioherbicide Chemistry & Biodiversity Vol. 15, Issue 8, , 2018 |
Provable secure lightweight hyper elliptic curve‐based communication system for wireless sensor networks International Journal of Communication Systems Vol. 31, Issue 15, , 2018 |
Malting and fermentation effects on antinutritional components and functional characteristics of sorghum flour Food Science & Nutrition Vol. 6, Issue 1, 47, 2018 |
Assessment of heavy metals and microbial contamination of gari from Liberia Food Science & Nutrition Vol. 6, Issue 1, 62, 2018 |
Toxicological parameters of albino rats fed with extruded snacks from Aerial yam (Dioscoria bulbifera) and African breadfruit seed (Treculia africana) Food Science & Nutrition Vol. 6, Issue 1, 94, 2018 |
The influence of pulsed electric fields and microwave pretreatments on some selected physicochemical properties of oil extracted from black cumin seed Food Science & Nutrition Vol. 6, Issue 1, 111, 2018 |
Antihyperglycemic and antidyslipidemic activity of Musa paradisiaca‐based diet in alloxan‐induced diabetic rats Food Science & Nutrition Vol. 6, Issue 1, 137, 2018 |
Effect of isolation techniques on the characteristics of pigeon pea (Cajanus cajan) protein isolates Food Science & Nutrition Vol. 6, Issue 1, 146, 2018 |
Mycofloral profile and the radiation sensitivity (D10 values) of solar dried and gamma irradiated Pleurotus ostreatus (Jacq.Ex. Fr.) Kummer fruitbodies stored in two different packaging materials Food Science & Nutrition Vol. 6, Issue 1, 180, 2018 |
Nutritional value of raw Canavalia ensiformis and its utilization as partial replacement for soybean meal in the diet of Clarias gariepinus (Burchell, 1822) fingerlings Food Science & Nutrition Vol. 6, Issue 1, 207, 2018 |
Nutritional, physicochemical, and functional properties of protein concentrate and isolate of newly‐developed Bambara groundnut (Vigna subterrenea L.) cultivars Food Science & Nutrition Vol. 6, Issue 1, 229, 2018 |
Dynamic Parameters Updating of Earth-rock Dams Based on Modal Parameter Identification KSCE Journal of Civil Engineering Vol. 27, Issue 10, 4163, 2023 |
Influences of alcohols, urea and polyethylene glycol on the cloudy formation nature and physico-chemical parameters of the mixture of triton X-100 and ceftriaxone sodium salt Colloids and Surfaces A: Physicochemical and Engineering Aspects |
Locust protein hydrolysates have the potential to enhance the storage stability of cheese Current Research in Food Science |
Development, characterization and use of rosemary essential oil loaded water-chestnut starch based nanoemulsion coatings for enhancing post-harvest quality of apples var. Golden delicious Current Research in Food Science |
Experiment study on seismic performance and size effect in BFRP-RC squat shear walls with different horizontal reinforcement ratios Engineering Structures |
Potential extinction risk of Juniperus phoenicea under global climate change: Towards conservation planning Global Ecology and Conservation |
Effects of invasive water hyacinth on fish diversity and abundance in the Lake Cluster of Pokhara Valley, Nepal Global Ecology and Conservation |
Face recognition using ensemble statistical local descriptors Journal of King Saud University - Computer and Information Sciences Vol. 35, Issue 9, 101729, 2023 |
A Novel Tissue Preservation and Transport Solution as a Substitute for Formalin Laboratory Investigation Vol. 103, Issue 9, 100198, 2023 |
Fractal Analysis of the Influence of Mesh Number of Sandpaper on Simulated Wear Process IOP Conference Series: Materials Science and Engineering |
Improving Quality of Service for Users of Leaderless DAG-Based Distributed Ledgers Distributed Ledger Technologies: Research and Practice Vol. 2, Issue 3, 1, 2023 |
Productivity and cost analysis of skidding with Timberjack 450C in forest plantations in Shafaroud watershed, Iran Journal of Forest Science Vol. 59, Issue 7, 261, 2013 |
Histopathological and haematological response of male rainbow trout (Oncorhynchus mykiss) subjected to butachlor Veterinární medicína Vol. 59, Issue 9, 433, 2014 |
Influence of long-term exposure to lead on its accumulation and elimination from tissues and on selected reproductive parameters in the Prussian carp (Carassius gibelio B.) in pond environment Czech Journal of Animal Science Vol. 60, Issue 10, 459, 2015 |
Evolution of leaf blade anatomy in Allium (Amaryllidaceae) subgenus Amerallium with a focus on the North American species American Journal of Botany Vol. 101, Issue 1, 63, 2014 |
An Adaptive Neural-Fuzzy Inference System for Prediction of Muscle Strength of Farmers in India International Journal of Service Science, Management, Engineering, and Technology Vol. 13, Issue 1, 1, 2022 |
Effects of processing methods on the functional properties and mineral composition of cashew kernel flour Journal on Processing and Energy in Agriculture Vol. 26, Issue 3-4, 83, 2022 |
Influence of maize hybrids and seed size after processing on the physical characteristics of the seeds, germination and races growth Journal on Processing and Energy in Agriculture Vol. 26, Issue 3-4, 111, 2022 |
Tomillo (Thymus vulgaris) como agente antimicrobiano en la producción de queso fresco Revista Amazónica. Ciencia y Tecnología Vol. 6, Issue 1, 45, 2017 |
How to cite this article
S. Abdurrahman CelIk , 2007. Surface Roughness Investigation in the Electrical Discharge Machining of Powder Metal Material. Journal of Applied Sciences, 7: 1608-1613.
DOI: 10.3923/jas.2007.1608.1613
URL: https://scialert.net/abstract/?doi=jas.2007.1608.1613
DOI: 10.3923/jas.2007.1608.1613
URL: https://scialert.net/abstract/?doi=jas.2007.1608.1613