Study about the New Mechanism Crank-group Driving Mechanism
Abstract:
Crank-group driving mechanism is a new type of transmission
mechanism it belongs to the elastic mechanism with clearance. It has many advantages
and its application prospect in the light machinery industry is very wide. This
study introuduced the mechanisms
origin and movement form, the existence conditions of crank-group, the structure
and configuration of the mechanism its function and characteristics the influence
of clearance between kinematic pairs and the methods of decreasing the influence
of clearance.
How to cite this article
Wang Yuqi and Cao Jujiang, 2013. Study about the New Mechanism Crank-group Driving Mechanism. Journal of Applied Sciences, 13: 5192-5197.
REFERENCES
An, P.W. and M.L. Huang, 2002. Study and application of analysis of overconstraints in planar closed chain mechanisms. Mach. Des., 19: 18-22.
Direct Link
Bai, Z. and Y. Zhao and Z.G. Zhao, 2011. Dynamic characteristics of mechanisms with joint clearance. J. Vibr. Shock, 30: 17-20.
Zhou, Z., 2006. Tribology Development Preface. Science Press, Beijing, China
Bai, Z., 2011. Research on Dynamic Characterisitcs of Mechanism with Joint Clearance. Harbin Industrial University, Harbin, China
Jia, W., C. Yin, F. Yong, D. Cao and H. Yang, 2012. Research on clearance flow of microscopic surface influence. Int. J. Digital Content Technol. Appl., 6: 117-125.
CrossRef
Guo, H. and W. Yue, 2012. Design optimization of planar linkage mechanism with joint clearance for improving the robustness of kinematic accuracy. J. Mech. Eng., 48: 75-81.
CrossRef Direct Link
Wang, G. and H. Liu, 2001. Dynamic response of 4R four-bar mechanism with a clearance joint. J. Mech. Transm., 25: 18-21.
An, P.W. and H. Ren, 2002. Overconstraints in the planar mechanism. Ningxia Eng. Technol., 1: 113-116.
Direct Link
Li, C., M. Wang and Y. Zhu, 2005. Rational design and arrangement of kinematic pair for planar linkages based on redundant constraint. Mech. Eng., 10: 109-111.
Direct Link
Sun, X., H. Jiang and B. Wang, 2012. Bearing and range estimation for multiple near-field sources based on ambiguity function. Adv. Inform. Sci. Serv. Sci., 4: 221-229.
Pu, L. and M. Ji, 2006. Design of Machine. Higher Education Press, China
Jin C.M., Y. Qiu and L. Zhang, 2001. On the control of clearance effects in the planar elastic mechanism. Mech. Sci. Technol., 20: 710-711.
Direct Link
Yang, W., 2001. Design of axial drilling machine with muiticranks. Sci. Technol. Inform. Dev. Econ., 11: 75-76.
© Science Alert. All Rights Reserved