HOME JOURNALS CONTACT

Journal of Applied Sciences

Year: 2013 | Volume: 13 | Issue: 13 | Page No.: 2474-2478
DOI: 10.3923/jas.2013.2474.2478
Research on temperature field of hot-rolled H-beam based on FEA method
Liu Jian, Hou Fu-Zeng, Chen Li-Jun and Yu Xiao-Guang

Abstract: The study uses the FEA software Ansys Workbench to simulate the temperature field under different controlled cooling process of hot rolling H-beam. The aim is to find the better controlled cooling process. Then the temperature field is verified using temperature measuring instrument and the theoretical value and analog value is consistent. It provides the theoretical basis for the further optimization of controlled cooling process.

Fulltext PDF

How to cite this article
Liu Jian, Hou Fu-Zeng, Chen Li-Jun and Yu Xiao-Guang, 2013. Research on temperature field of hot-rolled H-beam based on FEA method. Journal of Applied Sciences, 13: 2474-2478.

Keywords: The controlled cooling, temperature field, density of water and mechanical properties

REFERENCES
  • Gao, S.Y. and Y. Gao, 1989. The transient temperature distribution in the process of quenching and the mathematical modeling of tissue distribution. J. Dalian Univ. Technol., 29: 183-190.

  • Jia, Y.P., D. Wu and J. Guo, 2006. The controlled cooling of hot-rolled H-Beam on line. Iron Steel, 41: 45-48.

  • Liu, Z., Z.J. Wu and.J.Z. Wu, 1996. The Numerical Simulation in the Process of Heat Treatment. Beijing Science Press, China

  • Liu, Q., Y. Zhang and Q. Qin, 2008. The temperature change and thermal stress analysis in the process of controlled cooling of H-beam. Metall. Equip., 1: 17-20.

  • Sun, Z.J. and X.G. Zhang, 1999. Heat treatment of controlled cooling has an influence on the microstructure and mechanical properties of plain carbon steel. Heat Treatment Metals, 1: 9-13.

  • Xu, D.T., 2007. The numerical simulation of temperature field of h-beam in the process of controlled cooling. Steel Rolling, 24: 28-31.

  • Xie, S.H., Y. Fan and W.L. Yuan, 2004. The research of the controlled cooling process of hot-rolled H-beam. Steel Rolling, 5: 15-17.

  • Xu, X.D. and B.X. Wang, 2005. The finite element simulation of controlled cooling of H-beam. J. Iron Steel Res., 17: 30-33.

  • Nagasaka, Y., J.K. Brimacombe, E.B. Hawbolt, I.V. Samarasekera, B. Hernandez-Morales and S.E. Chidiac, 1993. Mathematical model of phase transformations and elastoplastic stress in the water spray quenching of steel bars. Metall. Trans. A, 24: 795-888.
    CrossRef    Direct Link    

  • Zhao, Y.Z. and Q.J. Zhu, 2001. The finite element simulation of medium thick plate in the process of cooling and productive application. Metall. Equip., l2: 12-15.

    • © Science Alert. All Rights Reserved