The Analysis of Shape Coefficients for Selected Raw Materials
Abstract:
The study presents the results of shape coefficient calculation for mineral grains of sieve sizes below 0.3 mm. To perform the analysis, the photos from scanning microscope and computer image analysis were used It was found that for the analyzed material, the full mechanical similarity occurred with the grain communition and the shape coefficients did not change. The course of elongation for analyzed population may be described by the quadratic curve. The investigations are in progress.
How to cite this article
Barbara Peszko, Jacek Kordek, Tomasz Niedoba and Aldona Krawczykowska, 2007. The Analysis of Shape Coefficients for Selected Raw Materials. Journal of Applied Sciences, 7: 2084-2087.
REFERENCES
Allen, T., 1992. Particle Size Measurement. Chapman and Hall, USA
Feda, J., 1982. Mechanics of Particulate Materials: The Principles. Development in Geotechnical Engineering 30. Czechoslovak Academy of Sciences, Elsevier, Amsterdam
Russ, J.C., 1986. Practical Steorology. Plenum, New York
Serra, J., 1982. Image Analysis and Mathematical Morphology. Academic Press, New York
Tadeusiewicz, R. and P. Korohoda, 1997. Komputerowa Analiza I Przetwarzanie Obrazow. Wydawnictwo Fundacji Postpu Telekomunikacji, Krakow
Wojnar, L., K.J. Kurzydowski and J. Szala, 2002. Praktyka Analizy Obrazu. Polskie Towarzystwo Stereologiczne, Krakow
Xu, R. and O.A. di Guida, 2003. Comparison of sizing small particles using different technologies. Powder Technol., 132: 145-153.
Direct Link
© Science Alert. All Rights Reserved