Precipitation Hardening in (α+β) and Lead-Tin Brasses
Abstract:
Commercially available two different compositions of(α+β) and lead-tin-brasses were solution treated at 815°C for ½ hr and aged at 400 and 500°C for ½ and 1 hr. The tensile test data were analyzed to find the UTS (ultimate tensile strength), elastic modulus, %elongation and reduction in area. The UTS for (a+β) brass with different heat treatments was found to vary between 371.42 to 417.40 N/mm2 with elongation of 25.7-30.15% and between 474.00 to 619.03 N/mm2 with elongation of 4.60-9.75% for lead-tin-brass. The Rockwell hardness (HRF) with these heat treatments were observed to decrease variably for both (α+β) and lead-tin-brass.
How to cite this article
Anwar Manzoor Rana, Abdul Faheem Khan, Abdus Salam and M. Tariq Bhatti, 2001. Precipitation Hardening in (α+β) and Lead-Tin Brasses. Journal of Applied Sciences, 1: 247-251.
REFERENCES
Padmavardhani, D. and Y.V.R.K. Prasad, 1991. Characterization of hot deformation behavior of brasses using processing maps: Part II. β Brass and α-β brass. Metallurgical Mater. Trans. A, 22: 2993-3001.
CrossRef Direct Link
Hornbogen, E. and H. Warlimont, 1967. The bainite transformation of beta-brass. Acta Metallurgica, 15: 943-951.
Direct Link
Cornelis, I. and C.M. Wayman, 1974. Phase transformations in metastable beta prime Cu-Zn alloys. Pt. 2. Isothermal transformations. Acta Metallurgica, 22: 301-311.
Direct Link
Kostic, M.M. and E.B. Hawbolt, 1979. Morphology and structure of bainite plates in the β phase of an Ag-45 at. pct Cd alloy. Metallurgical Trans. A, 10: 165-176.
Direct Link
Suery, M. and B. Baudelet, 1980. Hydrodynamical behaviour of a two-phase superplastic alloy: Alpha/beta brass. Philosophical Mag. A, 41: 41-64.
Direct Link
Brick, R.M., A.W. Pense and R.B. Gordon, 1977. Structure and Properties of Engineering Materials. 4th Edn., McGrath-Hill Kogakusha Ltd., Tokyo, Japan, pp: 173-174
Higgins, R.A., 1991. Engineering Metalurg. 5th Edn., ELBS Publishers, Tokyo, Japan, pp: 393-395
Avner, S.H., 1974. Introduction to Physical Metallurgy. 2nd Edn., McGraw-Hill Kogakusha Ltd., Tokyo, Japan, pp: 464-472
Willwam, F.S., 1993. Structure and Properties of Engineering Alloys. 2nd Edn., McGraw-Hill Kogakusha Inc., New York, USA
© Science Alert. All Rights Reserved