Subscribe Now Subscribe Today
Research Article
 

Study on Bearing Capacity Characteristics of an Axial Permanent Magnetic Bearing



Zhang Gang, Zhang Jian , Sun Yu-Zhuo , Zhang Hai-Long and Meng Qing-Tao
 
ABSTRACT

An axial permanent magnetic bearing is designed by selecting the combination of type a1 of basic configurations of axial PMB. Considering that this bearing only produces axial displacement and has the axis-symmetry structure, so it could be simplified into an axis-symmetry 2-D plane model for studying. Then, using ANSYS to make magnetic force calculation about 1/2 model and the influence of the width, thickness, section area and gap of both stator magnetic ring and rotor magnetic ring on the axial bearing capacity and axial stiffness is acquired. In the end, through contrastive analysis, some useful conclusion are obtained which is the optimization basis for physical design of this type of axial PMB. It has certain guiding significance for engineering application.

Services
Related Articles in ASCI
Similar Articles in this Journal
Search in Google Scholar
View Citation
Report Citation

 
  How to cite this article:

Zhang Gang, Zhang Jian , Sun Yu-Zhuo , Zhang Hai-Long and Meng Qing-Tao , 2013. Study on Bearing Capacity Characteristics of an Axial Permanent Magnetic Bearing. Journal of Applied Sciences, 13: 3028-3034.

DOI: 10.3923/jas.2013.3028.3034

URL: https://scialert.net/abstract/?doi=jas.2013.3028.3034

REFERENCES
Earnshaw, S., 1842. On the nature of the molecular forces which regulate the constitution of the luminiferous ether. Trans. Camb. Phil. Soc., 7: 97-112.

Huang, M.H., A.Q. Yang and F.L. Yang, 2005. Calculation of force between two permanent magnetic rings used in a hybrid magnetic bearing system. Mech. Res. Appli., 18: 39-41.

Li, Q.M., L. Wan and J.A. Duan, 2006. Design of a new radial permanent magnet bearing and analytical calculation of its magnet field. J. Central South Univ., 37: 970-975.

Liu, J.F., H. Choi and M. Walmer, 2006. Design of permanent magnet systems using finite element analysis. Proceedings of 19th International Workshop on Rare Earth Permanent Magnets and Their Applications, August 30-September 2, 2006, Beijing, pp: 383-387.

Marinescu, M. and N. Marinescu, 1994. A new improved method for computation of radial stiffness of permanent magnet bearings. IEEE Trans. Magnet., 30: 3491-3494.
CrossRef  |  

Okuda, H., T. Abukawa, K. Arai and M. Ito, 1984. Characteristics of ring permanent magnet bearing. IEEE Trans. Magnet., 20: 1693-1695.

Tan, Q.C., S.C. Xiu, M.J. Liu and H.Q. Meng, 1994. Study on bearing capacity and stiffness of radial magnetic bearing. Tribology, 14: 337-343.

Tian, L.L., Y. Li, Y. An and Q. Tian, 2007. Reasarch on the radial magnetic force of axial placement and axial magnetization bi-annular-shaped. China Mech. Eng., 18: 2926-2929.

Wang, H.C., S.Y. Jiang and Y.F. Liang, 2009. Analysis of axial stiffness of permanent magnet bearings by using the equivalent surface currents method. Chinese J. Mech. Eng., 45: 102-106.

Yang, Z.Y., H. Zhao, J. Tian and H. Yang, 2001. Analysis of mechanical characteristics of radial permanent bearings using finite element method. J. Hefei Univ. Technol., 24: 477-481.

Yao, H., 2004. Analysis of mechanical characteristics of permanent magnet bearings. M.E. College of Mechanical Engineering, Zhejiang University of Technology, China.

Yonnet, J.P., 1981. Permanent magnet bearings and couplings. IEEE Trans. Magnet., 17: 1169-1173.
CrossRef  |  

Yonnet, J.P., S. Hemmerlin, E. Rulliere and G. Lemarquand, 1993. Analytical calculation of permanent magnet couplings. IEEE Trans. Magnet., 29: 2932-2934.
CrossRef  |  

Zhang, G., C. Sun, J. Zhang and H.L. Zhang, 2012. Design and experimental verification of axial permanent magnetic bearings. Bearing, 11: 5-9.

©  2019 Science Alert. All Rights Reserved