J.J. Qin
Department of Mechanical-electronic and Vehicle Engineering, Beijing University of Civil Engineering and Architecture, 100044 Beijing, China
Y.A. Yao
School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, 100044 Beijing, China
Y.F. Liu
Department of Mechanical-electronic and Vehicle Engineering, Beijing University of Civil Engineering and Architecture, 100044 Beijing, China
ABSTRACT
This study discusses the conceptual design process based on kinematics characteristic and proposes how to analyze the feasible design scheme combinations on the basis of kinematics characteristic analysis. The possible kinematics characteristic of target scheme can be expressed by the possible typical form in the intermediate process from initial state to target state. The scheme solving process means the process in which function conversion element can generate the state of satisfying output. Function conversion generator, which relates to structural forms, can work out the overall scheme that meets design requirements through the combinational computation between mechanisms.
PDF References Citation
How to cite this article
J.J. Qin, Y.A. Yao and Y.F. Liu, 2013. Mechanical Conceptual Design Based on Kinematics Characteristic. Journal of Applied Sciences, 13: 1828-1832.
DOI: 10.3923/jas.2013.1828.1832
URL: https://scialert.net/abstract/?doi=jas.2013.1828.1832
DOI: 10.3923/jas.2013.1828.1832
URL: https://scialert.net/abstract/?doi=jas.2013.1828.1832
REFERENCES
- Freudenstein, F. and E.R. Maki, 1979. The creation of mechanisms according to kinematic structure and function. Environ. Plann. B, 6: 375-391.
CrossRef - Kota, S. and S.J. Chiou, 1992. Conceptual design of mechanisms based on computational synthesis and simulation of kinematic building blocks. Res. Eng. Des., 4: 75-87.
CrossRef - Saunders, M.N., K. Holtta-Otto and C.C. Seepersad, 2011. The characteristics of innovative, mechanical products. J. Mech. Des., Vol. 133, No. 2.
CrossRefDirect Link