Kamariah Noor Ismail
Faculty of Chemical Engineering, Universiti Teknologi _NLARA (UiTM),
40450 Shah Alam, Selangor, Malaysia
Ku Halim Ku Hamid
Faculty of Chemical Engineering, Universiti Teknologi _NLARA (UiTM),
40450 Shah Alam, Selangor, Malaysia
ABSTRACT
The objective of the present study was to develop a high porosity NOx reduction catalyst using cobalt and multi-component metal from low cost transition element which was deposited onto woven stainless steel wire-mesh monolith honeycomb by sol-gel method. These metals were mixed with titanium (iv) isopropoxide as a metal oxide precursor in sol-gelphase whereby metal titanium also acts as catalyst. The reduction activity of the prepared catalyst was investigated by using Temperature Program Reduction (TPR) instrument. It was found that the synthesized catalyst has shown high porosity in which it was reflected to an amount of single point BET surface area (100.065 m2 g-1) obtained from TPR data. The morphology of the synthesized catalyst particles was analyzed by using scanning electron, microscope (SEM).
PDF References Citation
How to cite this article
Kamariah Noor Ismail and Ku Halim Ku Hamid, 2007. Low Cost Transition Metals Doping over Tio2 for Denox Catalyst Deposited onto Woven Stainless Steel Wire Mesh. Journal of Applied Sciences, 7: 1998-2001.
DOI: 10.3923/jas.2007.1998.2001
URL: https://scialert.net/abstract/?doi=jas.2007.1998.2001
DOI: 10.3923/jas.2007.1998.2001
URL: https://scialert.net/abstract/?doi=jas.2007.1998.2001