Subscribe Now Subscribe Today
Science Alert
 
    Publisher: Asian Network for Scientific Information
   
  Asian Journal of Materials Science is an international peer-reviewed scientific journal dedicated for the rapid publication of experimental and theoretical investigations in the structure and properties of all science materials and their broad range of applications. Scope of the journal includes: Metals, ceramics, glasses, polymers, electrical materials, composite materials, fibers, nanostructured materials, nanocomposites, and biological and biomedical materials. Submit your best paper to Asian Journal of Materials Science via online submission system.

  Editor-in-Chief:  Semra Kurama
 
 
Avcioglu, S. and S. Kurama, 2017. Investigation of the influence of initial powder size on the optical properties of Dy-α-SiAlON ceramics fabricated by gas pressure sintering.. Ceram. Int., 43: S449-S454.
CrossRef  |  Direct Link  |  
Avcioglu, S. and S. Kurama, 2017. Spark plasma sintering of translucent dy–y dopedα-sialon: study of sintering parameters influenceon the optical properties by using taguchi method. Acta Phys. Polonica A, 131: 174-177.
Direct Link  |  
Corapcioglu, G. and S. Kurama, 2009. Oxidation behaviour and kinetics of α-SiAlON ceramics. Mater. High Temp., 26: 145-151.
CrossRef  |  Direct Link  |  
Eren, E. and S. Kurama, 2013. Defect Detection in Porcelain Tiles Using Ultrasound. In: Nondestructive Testing of Materials and Structures, Buyukozturk, O. and M.A. Taşdemir, Springer, Dordrecht,: ISBN 978-94-007-0722-1 pp 381-386.
Eren, E., S. Kurama and S. Gorgulu, 2011. Goruntü işleme tekniği ile porselen karoların incelenmesi. Eskişehir Osmangazi Universitesi Muhendislik Mimarlık Fakultesi Dergisi, 24: 133-143.
Eren, E., S. Kurama and I. Solodov, 2012. Characterization of porosity and defect imaging in ceramic tile using ultrasonic inspections. Ceram. Int., 38: 2145-2151.
CrossRef  |  Direct Link  |  
Eren, E., S. Kurama and R. Janssen, 2012. Ultrasonic characterization of defective porcelain tiles. Bol. Soc. Esp. Cerám. Vidrio, 51: 211-216.
Eren, E., S. Kurama, G. Stultz and S. Sorensen, 2012. Resonant inspection of ceramic tiles. Key Eng. Mater., 544: 450-454.
CrossRef  |  Direct Link  |  
Eren, E., Z.B. Ozturk and S. Kurama, 2014. Image analyses for porosity characterization of porcelain tiles with different thickness. Afyon Kocatepe Univ. Fen ve Muhendislik Bilimleri Dergisi, 14: 147-151.
Direct Link  |  
Eser, O. and S. Kurama, 2010. The effect of the wet-milling process on sintering temperature and the amount of additive of SiAlON ceramics. Ceram. Int., 36: 1283-1288.
CrossRef  |  Direct Link  |  
Eser, O. and S. Kurama, 2012. A comparison of sintering techniques using different particle sized β-SiAlON powders. J. Eur. Ceram. Soc., 32: 1343-1347.
CrossRef  |  Direct Link  |  
Eser, O. and S. Kurama, 2012. Improvement in the oxidation resistance of β-sialon ceramics produced from mechanically milled powders. J. Nano Res., 18: 281-290.
Direct Link  |  
Eser, O., S. Kurama and G. Gunkaya, 2010. The production of β-SiAlON ceramics with low amounts of additive, at low sintering temperature. J. Europ. Ceram. Soc., 30: 2985-2990.
CrossRef  |  Direct Link  |  
Gultekin, E.E., H. Sari and S. Kurama, 2016. The effect of sintering temperature of sanitarywares on physical properties and non-destructive test method. Anadolu Univ. J. Sci. Technol. Applied Sci. Eng., 172: 438-446.
Gultekin, E.E., Z.B. Ozturk and S. Kurama, 2015. The effect of porosity and glassy phase amount of porcelain tiles on ultrasonic velocity. J Aust. Cer. Soc., 51: 120-124.
Direct Link  |  
Gültekin, E.E., G. Topateş and S. Kurama, 2017. The effects of sintering temperature on phase and pore evolution in porcelain tiles. Ceram. Int., 43: 11511-11515.
CrossRef  |  Direct Link  |  
Herrmann, M., S. Kurama and H. Mandal, 2002. Investigation of the phase composition and stability of the α-SiAlONs by the rietveld method. J. Eur. Ceram. Soc., 22: 2997-3005.
CrossRef  |  Direct Link  |  
Kaplan, S.S., S. Kurama and G. Gunkaya, 2015. 2015 Spinel nitrides transparent ceramics. J. Eur. Ceram. Soc., 35: 3255-3262.
CrossRef  |  Direct Link  |  
Kara, A., H. Kurama, Y. Kara and S. Kurama, 2004. Utilization of coal combustion fly ash in terracotta bodies. Key Eng. Mater., 264: 2513-2516.
Direct Link  |  
Kurama, S. and E. Ozel, 2009. The influence of different CaO source in the production of anorthite ceramics. Ceram. Int., 35: 827-830.
CrossRef  |  Direct Link  |  
Kurama, S. and E.E. Gultekin, 2014. Characterization of silicate ceramics using ultrasonics test method. Adv. Sci. Technol., 92: 194-202.
CrossRef  |  Direct Link  |  
Kurama, S. and G. Saydam, 2017. Investigation properties of BaO/RO-Al2O3-R2O3-B2O3-SiO2 glass-ceramic sealants for solid oxide fuel cell. J. Australian Ceram. Soc., 53: 293-298.
Direct Link  |  
Kurama, S. and H. Kurama, 2008. The reaction kinetics of rice husk based cordierite ceramics. Ceram. Int., 34: 269-272.
CrossRef  |  Direct Link  |  
Kurama, S. and H. Mandal, 2004. Formation of α-SiAlON ceramics containing scandium. Key Eng. Mater., 264-268: 1107-1110.
Direct Link  |  
Kurama, S. and H. Mandal, 2004. Mg+2 and Ce+3 doped α-SiAlON ceramics. Key Eng. Mater., 264-268: 1111-1114.
Direct Link  |  
Kurama, S. and H. Mandal, 2004. Microstructural evolution r-α-SiAlON ceramics (R=Y, Y+Sm and Sm). Key Eng. Mater., 264-268: 1103-1106.
Direct Link  |  
Kurama, S. and M. Herrmann, 2004. Thermal stability of yittrium -and-neodymium-doped-SiAlON Ceramics. Silicate Ind. Spec., 69: 241-248.
Kurama, S. and M. Herrmann, 2007. Densification of Sr-Mg doped SiAlONs with GPS and SPS. Mater. Sci. Forum, 554: 95-100.
Kurama, S. and N. Ay, 2002. Effect of grinding time and MgO source on cordierite formation. Ceram. Soc. Bull., 81: 58-61.
Direct Link  |  
Kurama, S., 2008. The effect of processing on the  sialon transformation during cycling heat treatments. Mater. Sci. Eng., 487: 278-288.
Kurama, S., A. Kara and H. Kurama, 2006. The effect of boron waste in phase and microstructural development of a terracotta body during firing. J. Eur. Ceram. Soc., 26: 755-760.
CrossRef  |  Direct Link  |  
Kurama, S., A. Kara and H. Kurama, 2007. Investigation of borax waste behaviour in tile production. J. Eur. Ceram. Soc., 27: 1715-1720.
CrossRef  |  Direct Link  |  
Kurama, S., E. Ozel and N. Ay, 2004. Synthesis and sintering of cordierite at low temperature from kaolin and magnesium hydroxide. Key Eng. Mater., 264: 925-928.
Direct Link  |  
Kurama, S., G. Cigdemir, H. Mandal and M. Herrmann, 2006. Sr2+–Mg2+‐doped SiAlON ceramics. J. Am. Ceram. Soc., 89: 714-716.
CrossRef  |  Direct Link  |  
Kurama, S., I. Schulz and M. Herrmann, 2009. Wear Behaviour of -and / -SiAlON Ceramics Stabilized with Nd2O3 and Y2O3. J. Eur. Ceram. Soc., 29: 155-162.
Kurama, S., I. Schulz and M. Herrmann, 2011. Wear properties of -and / -SiAlON Ceramics obtained by gas pressure sintering and spark plasma sintering. J. Eur. Ceram. Soc., 31: 921-930.
Kurama, S., M. Herrmann and H. Mandal, 2002. Improvement of elongated α-SiAlON ceramics by variation of the processing conditions and amounts of additives. Key Eng. Mater., 206-213: 1009-1012.
CrossRef  |  Direct Link  |  
Kurama, S., M. Herrmann and H. Mandal, 2002. The effect of processing conditions, amount of additives and composition on the microstructures and mechanical properties of α-SiAlON ceramics. J. Eur. Ceram. Soc., 22: 109-119.
CrossRef  |  Direct Link  |  
Kurama, S., M. Herrmann and H. Mandal, 2003. The design of compositions for multi-cation doped α-β SiAlON ceramics by the rietveld method. Key Eng. Mater., 237: 59-64.
Direct Link  |  
Kurama, S., S. Avcioglu and E. Ayas, 2015. Optimization of the optical properties of α-SiAlON through a decrease in starting powder size. J. Eur. Ceramic Soc., 35: 3229-3235.
CrossRef  |  Direct Link  |  
Kurama, S.and E.R.E.N. Elif, 2012. Characterization of mechanical properties of porcelain tile using ultrasonics. Gazi Univ. J. Sci., 25: 761-768.
Mihalic, F. and S. Kurama, 2016. Design of alternative composite material to available tractor Cabins. J. Australian Ceramic Soc., 52: 78-82.
Ozel, E. and S. Kurama, 2008. Production of cordierite ceramic by aqueous tape casting process. J. Mater. Process. Technol., 198: 68-72.
CrossRef  |  Direct Link  |  
Ozel, E. and S. Kurama, 2010. Effect of the processing on the production of cordierite–mullite composite. Ceram. Int., 36: 1033-1039.
CrossRef  |  Direct Link  |  
Ozel, E., S. Kurama and N. Ay, 2002. How active silica affects slip properties of Sanitaryware. Am. Ceram. Soc. Bull., 81: 42-45.
Sakarya, O., S. Kurama, and G. Gunkaya, 2017. Effect of Al2O3 Nanofiller on ion conductivity, transmittance, and glass transition temperature of PEI:LiTFSI:PC:EC polymer electrolytes. J. Polym. Res., .
Direct Link  |  
Sari, H. and S. Kurama, 2013. Effects of modification of glassy phase composition on sintering temperature of sanitaryware. J. Facu. Eng. Arch. Gazi Univ., 28: 445-454.