Subscribe Now Subscribe Today
Science Alert
 
    Publisher: Asian Network for Scientific Information
   
  Asian Journal of Materials Science is an international peer-reviewed scientific journal dedicated for the rapid publication of experimental and theoretical investigations in the structure and properties of all science materials and their broad range of applications. Scope of the journal includes: Metals, ceramics, glasses, polymers, electrical materials, composite materials, fibers, nanostructured materials, nanocomposites, and biological and biomedical materials. Submit your best paper to Asian Journal of Materials Science via online submission system.

  Editor-in-Chief:  Semra Kurama
 
 
Affendy, M.G and A.M. Ahmad, 2012. Effects of corrosion on the shear strength of Cu/Sn-9Zn/Cu lap joints in 3.5 wt. % NaCl solution. Int. J. Electrochem. Sci., 7: 4951-4958.
Direct Link  |  
Affendy, M.G., Z.Y. Muhamad and A.M. Ahmad, 2014. Corrosion of Sn-9Zn solder Joints: A review. Int. J. Electroactive Mater., 2: 8-16.
Direct Link  |  
Affendy, M.G., Z.Y. Muhamad, C.A. Fakhrozi and A.M. Ahmad, 2015. Corrosion measurement on shear strength of Cu/Sn–9Zn/Cu lap joints. Meas., 66: 195-203.
CrossRef  |  Direct Link  |  
Ali, A.M.M., M.Z.A. Yahya, M. Mustaffa, A.H. Ahmad, R.H.Y. Subban and A.A. Mohamad, 2005. Electrical Properties of plasticized chitosan-lithium imide with oleic acid-based polymer electrolytes for lithium rechargeable batteries. Ionics, 11: 460-463.
CrossRef  |  Direct Link  |  
Alias, N and A.M. Ahmad, 2014. Synthesis and electrochemical behavior of LiFePO4/C with an air–electrode in an aqueous lithium ion battery. Ceram. Int., 40: 13089-13096.
CrossRef  |  Direct Link  |  
Alias, N and A.M. Ahmad, 2015. Advances of aqueous rechargeable lithium-ion battery: A review. J. Power Sources, 274: 237-251.
CrossRef  |  Direct Link  |  
Alias, N and A.M. Ahmad, 2015. Morphology study of electrodeposited zinc from zinc sulfate solutions as anode for zinc-air and zinc-carbon batteries. J. King Saud Univ. Eng. Sci., 27: 43-48.
CrossRef  |  Direct Link  |  
Alias, S.S., A.B. Ismail and A.A. Mohamad, 2010. Effect of pH on ZnO nanoparticle properties synthesized by sol-gel centrifugation. J. Alloys Comp., 499: 231-237.
CrossRef  |  Direct Link  |  
Alias, S.S., M.A. Zulkifli and A.M. Ahmad, 2015. Porous membrane based on chitosan–SiO2 for coin cell proton battery. Ceram. Int., 41: 5484-5491.
CrossRef  |  Direct Link  |  
Badarulzaman, N.A., S. Purwadaria, A.A. Mohamad and Z.A. Ahmad, 2009. The production of nickel-alumina composite coating via electroplating. Ionics, 15: 603-607.
CrossRef  |  Direct Link  |  
Hatta, F.F., M.Z.A. Yahya, A.M.M. Ali, R.H.Y. Subban, M.K. Harun and A.A. Mohamad, 2005. Electrical conductivity studies on PVA/PVP-KOH alkaline solid polymer blend electrolyte. Ionics, 11: 418-422.
CrossRef  |  Direct Link  |  
Ismail, Y.M.B., H. Habsah and A.M. Ahmad, 2012. Hydroponics polymer gels for Zn-MnO2 alkaline batteries. Int. J. Electrochem. Sci., 7: 3555-3566.
Direct Link  |  
Jamaludin, A and A.A. Mohamad, 2010. Application of liquid gel polymer electrolyte based on chitosan-NH4NO3 for proton batteries. J. Appl. Polym. Sci., 18: 1240-1243.
CrossRef  |  Direct Link  |  
Jamaludin, A and A.A. Mohamad, 2010. Gel Polymer Electrolyte For Direct Borohydride Fuel Cell., Lambert Academic Publishing, Germany, Pages: 108..
Direct Link  |  
Jamaludin, A., Z. Ahmad, Z.A. Ahmad and A.A. Mohamad, 2010. A direct borohydride fuel cell employing a sago gel polymer electrolyte. Int. J. Hydrogen Energy, 35: 11229-11236.
CrossRef  |  Direct Link  |  
Jeremy C.H. Koh, Zainal Arifin Ahmad, Ahmad Azmin Mohamad, 2011. Self-Aligned TiO2 nanotube arrays produced by air-cathode as electrode. J. Alloys Comp., 509: 8707-8715.
CrossRef  |  Direct Link  |  
Khalid, N.H., I.Y.M. Baba and A.A. Mohamad, 2008. ZnCl2- and NH4Cl-Hydroponics Gel electrolytes for zinc-carbon batteries. J. Power Sources, 176: 393-395.
CrossRef  |  Direct Link  |  
Koh, J.C.H., A.A. Zainal and A.M. Ahmad, 2012. Bacto agar-based gel polymer electrolyte. Ionics, 18: 359-364.
CrossRef  |  Direct Link  |  
Lee, L.M and A.M. Ahmad, 2013. Interfacial reaction of Sn-Ag-Cu Lead-Free solder alloy on Cu: A review. Adv. Mater. Sci. Eng., 10.1155/2013/123697.
CrossRef  |  Direct Link  |  
Lee, L.M., F.M.N. Muhammad, H. Habsah and A.M. Ahmad, 2014. Corrosion of Sn-3.0Ag-0.5Cu thin films on Cu substrates in alkaline solution. Soldering Surf. Mount Technol., 26: 79-86.
CrossRef  |  Direct Link  |  
Lee, L.M., H. Haliman and A.A. Mohamad, 2013. Interfacial reaction of a Sn-3.0 Ag-0.5 Cu thin film during solder reflow. Soldering Surf. Mount Technol., 25: 15-23.
CrossRef  |  Direct Link  |  
Liew, M.C., I. Ahmad, L.M. Lee, M.F.M. Nazeri, H. Haliman and A.A. Mohamad, 2012. Corrosion behavior of Sn-3.0 Ag-0.5 Cu lead-free solder in potassium hydroxide electrolyte. Metall. Mater. Trans. A, 43: 3742-3747.
CrossRef  |  Direct Link  |  
Masri, M.N and A.A. Mohamad, 2009. Effect of adding potassium hydroxide to an agar binder for use as the anode in Zn-air batteries. Corros. Sci., 51: 3025-3029.
CrossRef  |  Direct Link  |  
Masri, M.N., M.F.M. Nazeri and A.A. Mohamad, 2010. Sago gel polymer electrolyte for zinc-air battery. Adv. Sci. Technol., 72: 305-308.
CrossRef  |  Direct Link  |  
Masri, M.N., Z.M. Yunus, A.R.M. Warikh and A.A. Mohamad, 2010. Electrical conductivity and corrosion protection properties of conductive paint coating Anti-Corros. Meth. Mater., 57: 204-208.
CrossRef  |  Direct Link  |  
Mohamad, A.A and A.K. Arof, 2006. Effect of storage time on the properties of PVA-KOH alkaline solid polymer electrolyte system. Ionics, 12: 57-61.
CrossRef  |  Direct Link  |  
Mohamad, A.A and A.K. Arof, 2006. Effect of temperature on the conductivity, structural, and morphology of PVA-based alkaline solid polymer electrolyte. Ionics, 12: 263-268.
CrossRef  |  Direct Link  |  
Mohamad, A.A and A.K. Arof, 2007. Plasticized alkaline solid polymer electrolyte system. Mater. Lett., 61: 3096-3099.
CrossRef  |  Direct Link  |  
Mohamad, A.A and A.K. Arof, 2008. Ni-MH battery based on plasticized alkaline solid polymer electrolytes. Ionics, 14: 415-420.
CrossRef  |  Direct Link  |  
Mohamad, A.A., 2005. Degradation in polymer Ni-MH battery. Ionics, 11: 294-300.
CrossRef  |  Direct Link  |  
Mohamad, A.A., 2006. Zn/gelled 6 M KOH/O2 zinc-air battery. J. Power Sources, 159: 752-757.
CrossRef  |  Direct Link  |  
Mohamad, A.A., 2008. Electrochemical properties of aluminum anodes in gel electrolyte-based aluminum-air batteries. Corros. Sci., 50: 3475-3479.
CrossRef  |  Direct Link  |  
Mohamad, A.A., 2016. Absorbency and conductivity of quasi-solid-state polymer electrolytes for dye- sensitized solar cells: A characterization review. J. Power Sources, 329: 57-71.
CrossRef  |  Direct Link  |  
Mohamad, A.A., H. Haliman, M.A. Sulaiman, M.Z.A. Yahya and A.M.M. Ali, 2008. Electrical conductivity studies of plasticized anhydrous PEO-KOH alkaline solid polymer electrolyte. Ionics, 14: 59-62.
CrossRef  |  Direct Link  |  
Mohamad, A.A., N.S. Mohamed, M.Z.A. Yahya, R. Othman, S. Ramesh, Y. Alias and A.K. Arof, 2003. Ionic conductivity studies of poly(vinyl alcohol) alkaline solid polymer electrolyte and its use in nickel-zinc cells. Solid State Ionics, 156: 171-177.
CrossRef  |  Direct Link  |  
Mohamad, A.A., N.S. Mohamed, Y. Alias and A.K. Arof, 2002. Studies of alkaline solid polymer electrolyte and mechanically alloyed polycrystalline Mg2Ni for use in nickel-metal hydride batteries. J. Alloys Comp., 337: 208-213.
CrossRef  |  Direct Link  |  
Mohamad, A.A., N.S. Mohamed, Y. Alias and A.K. Arof, 2003. Mechanical alloy Mg2Ni for metal hydride-air secondary battery. J. Power Sources, 115: 161-166.
CrossRef  |  Direct Link  |  
Mohamad, A.A., Y. Alias and A.K. Arof, 2003. Mg2Ni hydrogen storage alloys for metal hydride-air cell. J. New Mater. Electrochem. Syst., 6: 205-210.
Direct Link  |  
Nazeri, M.F.M and A.A. Mohamad, 2014. Corrosion measurement of Sn-Zn lead-free solders in 6M KOH solution. Meas., 47: 820-826.
CrossRef  |  Direct Link  |  
Nazeri, M.F.M and A.M. Ahmad, 2015. Effect of exposure to alkaline solution on Sn-9Zn solder joints. J. Mater. Process. Technol., 219: 164-172.
CrossRef  |  Direct Link  |  
Nazeri, M.F.M., B.I. Ahmad and A.M. Ahmad, 2014. Effect of polarizations on Sn-Zn solders alloys in alkaline electrolyte. J. Alloys Comp., 606: 278-287.
CrossRef  |  Direct Link  |  
Nazeri, M.F.M., G.A. Muhammad and A.M. Ahmad, 2012. Corrosion study of Sn-9Zn Lead-Free solder in alkaline solution. Int. J. Electrochem. Sci., 7: 4182-4191.
Direct Link  |  
Nazeri, M.F.M., M.S.M. Suan, M.N. Masri, N. Alias, M.W.A. Rashid, Y. Alias and A.A. Mohamad, 2012. Corrosion and heat treatment of paint coating containing battery cathode waste Material-Epoxy resin in 3.5 wt% sodium chloride solution. Int. J. Electrochem. Sci., 7: 9633-9642.
Direct Link  |  
Nazeri, M.F.M., S.M.S. Mohd, N.M. Mohamad, A. Nurhaswani and A.M. Ahmad, 2012. Corrosion studies of conductive paint coating using battery cathode waste material in sodium chloride solution. Int. J. Electrochem. Sci., 7: 6976-6987.
Direct Link  |  
Ng, L.S and A.A. Mohamad, 2006. Protonic battery based on a plasticized chitosan-NH4NO3 solid polymer electrolyte. J. Power Sources, 163: 382-385.
CrossRef  |  Direct Link  |  
Ng, L.S and A.A. Mohamad, 2008. Effect of temperature on the performance of proton batteries based on Chitosan-NH4NO3-EC membrane. J. Membr. Sci., 325: 653-657.
CrossRef  |  Direct Link  |  
Ng, P.L., J. Aliyah, A. Yatimah, J.B. Wan, A.A. Zainal and A.M. Ahmad, 2012. Effect of KOH concentration in the gel polymer electrolyte for direct borohydride fuel cell. J. Appl. Polym. Sci., 123: 2662-2666.
CrossRef  |  Direct Link  |  
Tan, A.L., L.J. Khoo, S.S. Alias and A.A. Mohamad, 2012. ZnO nanoparticles and poly (acrylic) acid-based polymer gel electrolyte for photo electrochemical cell. J. Sol-Gel Sci. Technol., 64: 184-192.
CrossRef  |  Direct Link  |  
Tan, W.C., S.A. Siti, B.I. Ahmad and A.M. Ahmad, 2012. Effect of styrene- acrylonitrile content on 0.5 M NaI/0.05 MI2 liquid electrolyte encapsulation for dye-sensitized solar cells. J. Solid State Electrochem., 16: 2103-2112.
CrossRef  |  Direct Link  |  
Yahaya, M.Z., F.C. Ani, Z. Samsudin, S. Sahin, M.Z. Abdullah and A.A. Mohamad, 2016. Hardness profiles of Sn-3.0 Ag-0.5 Cu-TiO2 composite solder by nanoindentation. Mater. Sci. Eng. A, 669: 178-186.
CrossRef  |  Direct Link  |  
Yahaya, M.Z., M.Z. Abdullah and A.A. Mohamad, 2015. Centrifuge and storage precipitation of TiO2 nanoparticles by the sol-gel method. J. Alloys Comp., 651: 557-564.
CrossRef  |  Direct Link  |  
Yap, C.K., W.C. Tan, S.S. Alias and A.A. Mohamad, 2009. Synthesis of zinc oxide by zinc-air system. J. Alloys Compd., 484: 934-938.
CrossRef  |  Direct Link  |