Subscribe Now Subscribe Today
Science Alert
 
   
 
    Publisher: Science International
   
  Trends in Applied Sciences Research is now closed for new submissions effective by August 15, 2021. Science International has officially acquired this journal, and now it has been transferred to the new publisher. If you want to submit your research work to this journal, please visit the official website of Science International. Moreover, papers published until December 2021 will remain available on Science Alert.



  Editor-in-Chief:  Hossam El Din Mohammad Sallam
 
 
10- Abd-Elhady, A.A., H.E.D.M. Sallam and M.A. Mubaraki, 2017. Failure analysis of composite repaired pipelines with an inclined crack under static internal pressure. Procedia Struct. Integr., 5: 123-130.
CrossRef  |  Direct Link  |  
Abadel, A., H. Abbas, T. Almusallam, Y. Al-Salloum and N. Siddiqui, 2015. Mechanical properties of hybrid fibre-reinforced concrete–analytical modelling and experimental behaviour. Mag. Conc. Res., 68: 823-843.
CrossRef  |  Direct Link  |  
Abd-Elhady, A., A. Abu-Sinna, M. Atta and H.E.D.M. Sallam, 2019. Identification of damage stages in bolted metallic joints for different joint geometries and tightening torques using statistical analysis. Adv. Struct. Eng., 23: 911-923.
CrossRef  |  Direct Link  |  
Abd-Elhady, A.A and H.E.M. Sallam, 2015. Crack sensitivity of bolted metallic and polymeric. Eng. Fract. Mech., 147: 55-71.
CrossRef  |  Direct Link  |  
Abd-Elhady, A.A. and H.E.D.M. Sallam, 2016. Effect of Poisson’s Ratio on Stress/Strain Concentration at Circular Holes in Elastic Plates Subjected to Biaxial Loading—Three Dimensional Finite Element Analysis. In: Characterization of Minerals, Metals and Materials, Ikhmayies, S.J., B. Li, J.S. Carpenter, J.Y. Hwang, S.N. Monteiro et al (Eds.). Springer, Cham, ISBN: 978-3-319-48623-9, pp: 45-55.
Abd-Elhady, A.A., A. Meroufel, H.E.D.M. Sallam and M. Atta, 2020. Experimental and numerical determination of critical osmotic blister size affecting the strength of aged FRP seawater pipe. Polym. Polym. Composites, 29: 456-469.
CrossRef  |  Direct Link  |  
Abd-Elhady, A.A., H.E.D.M. Sallam, I.M. Alarifi, R.A. Malik and T.M.A.A. EL-Bagory, 2020. Investigation of fatigue crack propagation in steel pipeline repaired by glass fiber reinforced polymer. Composite Struct., Vol. 242. 10.1016/j.compstruct.2020.112189.
CrossRef  |  Direct Link  |  
Abd-Elhady, A.A., M.A. Mubaraki and H.E.M. Sallam, 2018. Progressive failure prediction of pinned joint in quasi-isotropic laminates used in pipelines. Latin Am. J. Solids Struct., Vol. 15. 10.1590/1679-78255061 .
CrossRef  |  Direct Link  |  
Abd-Elhady, A.A., S. Mousa, W.H. Alhazmi, H.E.M. Sallam and M. Atta, 2020. Effects of composite patching on cyclic crack tip deformation of cracked pinned metallic joints. J. Adhesion, 10.1080/00218464.2020.1803843.
CrossRef  |  Direct Link  |  
Abu-Sinna, A., A.A. Abd-Elhady, M. Atta and H.E.D.M. Sallam, 2018. The failure stages of bolted double-lap metallic joints: Experimental study. J. Brazilian Society Mech. Sci. Eng., Vol. 40. 10.1007/s40430-018-1314-2.
CrossRef  |  Direct Link  |  
Adam, F.M., A.E. Hassaballa and H.E.M. Sallam, 2015. Derivation of supports moments coefficients for prismatic continuous beams by elastic analysis. Int. J. Eng. Innovation Res., 4: 613-622.
Direct Link  |  
Ahmad, M.N., H.E.M. Sallam, S.E. Ahmad and M.N. Metwally, 1995. Effect of overload and R ratio of base load on fcg behaviour. AEIC'95 Con., Al-Azhar Uni., 7: 92-99.
Al-Tersawy, S.H., R.A. El-Sadany and H.E.M. Sallam, 2021. Experimental gamma-ray attenuation and theoretical optimization of barite concrete mixtures with nanomaterials against neutrons and gamma rays. Construction Build. Mater., Vol. 289. 10.1016/j.conbuildmat.2021.123190.
CrossRef  |  Direct Link  |  
Al-Tersawy, S.H., R.A. El-Sadany and H.E.M. Sallam, 2021. Long-term behavior of normal weight concrete containing hybrid nanoparticles subjected to gamma radiation. Arch. Civ. Mech. Eng., Vol. 21. 10.1007/s43452-020-00157-4.
CrossRef  |  Direct Link  |  
Alhazmi, W.H., A.A. Abd-Elhady, S. Mousa, M. Atta, A. Abu-Sinna, O. Bafakeeh and H.E.M. Sallam, 2019. Notch tensile strength of carbon fiber/epoxy composite plate with a center hole under static and cyclic loading. Procedia Struct. Integrity, 17: 292-299.
CrossRef  |  Direct Link  |  
Alhazmi, W.H., Y. Jazaa, S. Mousa, A.A. Abd-Elhady and H.E.M. Sallam, 2021. Tribological and mechanical properties of epoxy reinforced by hybrid nanoparticles. Latin Am. J. Solids Struct., Vol. 18. 10.1590/1679-78256384.
CrossRef  |  Direct Link  |  
Atta, M., A. Abu-Sinna, S. Mousa, H. Sallam and A. Abd-Elhady, 2021. Flexural behavior of functionally graded polymeric composite beams. J. Ind. Text., 10.1177/15280837211000365.
CrossRef  |  Direct Link  |  
Atta, M., A.A. Abd-Elhady, A. Abu-Sinna and H.E M. Sallam, 2019. Prediction of failure stages for double lap joints using finite element analysis and artificial neural networks. Eng. Failure Anal., 97: 242-257.
CrossRef  |  Direct Link  |  
Balaha, M.M., M.H. Seleem, M.H.A. Kotb, H.E.M. Sallam and H. Abd El-Rahman, 2008. Fracture behavior of concretes incorporating bone powder. Mansoura Eng. J., 33: C.66-C.77.
Bashiri, A., H.E.M. Sallam and A.A. Abd-Elhady, 2020. Progressive failure analysis of a hip joint based on extended finite element method. Eng. Fail. Anal., Vol. 117. 10.1016/j.engfailanal.2020.104829.
CrossRef  |  Direct Link  |  
Berkeley, D.W., H.E.M. Sallam and H.N. Hashemi, 1997. The effect of manufacturing parameters on the corrosion and stress corrosion resistance of AA6061 and nextel 440 fiber reinforced AA6061 composite. Al-Azhar Uni. Cairo., 7: 45-53.
Berkeley, D.W., H.E.M. Sallam and H.N. Hashemi, 1998. The effect of pH on the mechanism of corrosion and stress corrosion and degradation of mechanical properties of AA6061 and Nextel 440 fiber-reinforced AA6061 composite. Corros. Sci., 40: 141-153.
CrossRef  |  Direct Link  |  
EL-Bagory, T.M.A.A., M.Y.A. Younan, H.E.M. Sallam and L.A. Abdel-Latif, 2014. Effect of load angle on limit load of polyethylene miter pipe bends. J. Pressure Vessel Technol., Vol. 136. 10.1115/1.4026069.
CrossRef  |  Direct Link  |  
EL-Bagory, T.M.A.A., H.E.M. Sallam and M.Y.A. Younan, 2020. Effect of loading rate and pipe wall thickness on the strength and toughness of welded and unwelded polyethylene pipes. J. Pressure Vessel Technol., Vol. 143. 10.1115/1.4047444.
CrossRef  |  Direct Link  |  
EL-Emam, H., A. El-Sisi, M. Bneni, S.S.E. Ahmad and H.E.D.M. Sallam, 2020. Effects of tensile reinforcing steel ratio and near-surface-mounted bar development length on the structural behavior of strengthened RC beams. Latin Am. J. Solids Struct., Vol. 17. 10.1590/1679-78255836.
CrossRef  |  Direct Link  |  
El Emam, H.M., H.A. Salim and H.E.M. Sallam, 2016. Composite patch configuration and prestraining on crack tip deformation and plastic zone for inclined cracks. J. Compos. Constr., 10.1061/(ASCE)CC.1943-5614.0000655.
CrossRef  |  Direct Link  |  
El-Aziz, K.A., D. Saber and H.E.D.M. Sallam, 2015. Wear and corrosion behavior of Al–Si matrix composite reinforced with alumina. J. Bio Tribo Corros., Vol. 1. 10.1007/s40735-014-0005-5.
CrossRef  |  Direct Link  |  
El-Bagory, T.M., H.E. Sallam and M.Y. Younan, 2015. Evaluation of fracture toughness behavior of polyethylene pipe materials. J. Pressure Vessel Technol., Vol. 137. 10.1115/1.4029925.
CrossRef  |  Direct Link  |  
El-Bagory, T.M., H.E.M. Sallam and M. Younan, 2014. Effect of strain rate, thickness, welding on the J-R curve for polyethylene pipe materials. Theor. Appl. Fract. Mech., 74: 164-180.
CrossRef  |  Direct Link  |  
El-Bagory, T.M., M. Younan, H.E.M. Sallam and L. Abdel-Latif, 2014. Limit load determination and material characterization of cracked polyethylene miter pipe bends. J. Pressure Vessel Technol., 10.1115/1.4026330.
CrossRef  |  Direct Link  |  
El-Bagory, T.M., M.Y. Younan, H.E. Sallam and L.A. Abdel-Latif, 2013. Plastic load of precracked polyethylene miter pipe bends subjected to in-plane bending moment. J. Pressure Vessel Technol., Vol. 135 10.1115/1.4024658.
CrossRef  |  Direct Link  |  
El-Emam, H., A. Elsisi, H. Salim and H. Sallam, 2018. Fatigue crack tip plasticity for inclined cracks. Int. J. Steel Struct., 18: 443-455.
CrossRef  |  Direct Link  |  
El-Emam, H.M., H.A. Salim and H.E. Sallam, 2017. Composite patch configuration and prestress effect on SIFs for inclined cracks in steel plates. J. Struct. Eng., Vol. 143, No. 5. 10.1061/(ASCE)ST.1943-541X.0001727.
CrossRef  |  Direct Link  |  
El-Ma, H.S.S.A., A.S. Sherbini and H.E.M. Sallam, 2015. Locating the site of diagonal tension crack initiation and path in reinforced concrete beams. Ain Shams Eng. J., 6: 17-24.
CrossRef  |  Direct Link  |  
El-Ma, H.S.S.A., A.S. Sherbini and H.E.M. Sallam, 2015. Mode II fracture toughness of hybrid FRCs. Int. J. Concr. Struct. Mater., 9: 475-486.
CrossRef  |  Direct Link  |  
El-Mal, H.S.S., A.S. Sherbini and H.E.M. Sallam, 2018. Structural behavior of rc beams containing a pre-diagonal tension crack. Latin Am. J. Solid Struct., Vol. 15. 10.1590/1679-78254701 .
CrossRef  |  Direct Link  |  
El-Sagheer, I., A.A. Abd-Elhady, H.E.D.M. Sallam and S.A.R. Naga, 2021. An assessment of ASTM E1922 for measuring the translaminar fracture toughness of laminated polymer matrix composite materials. Polymers, Vol. 13. 10.3390/polym13183129.
CrossRef  |  Direct Link  |  
El-Sisi, A.E.D., H.E.D. Sallam, H.A. Salim and O.M. El-Husseiny, 2018. Structural behavior of hybrid CFRP/steel bolted staggered joints. Constr. Build. Mater., 190: 1192-1207.
CrossRef  |  Direct Link  |  
El-Sisi, A.E.D.A., H.A. Salim, O.M. El-Hussieny and H.E.D.M. Sallam, 2014. Behaviors of a cracked lapped joint under mixed mode loading. Eng. Fail. Anal., 36: 134-146.
CrossRef  |  Direct Link  |  
El-Sisi, A.E.D.A., H.M. El-Emam, H.A. Salim and H.E.D.M. Sallam, 2015. Efficient 3D modeling of damage in composite materials. J. Comp. Mater., 49: 817-828.
CrossRef  |  Direct Link  |  
El-Sisi, A.E.D.A., H.M. El-Emam, H.A. Salim and H.E.D.M. Sallam, 2020. Deformation and load transfer analysis of staggered composite-steel lap joints subjected to progressive damage. Eng. Struct., Vol. 215. 10.1016/j.engstruct.2020.110690.
CrossRef  |  Direct Link  |  
El-Sisi, A.E.D.A., O.M. El-Husseiny, E.B. Matar, H.E.D.M. Sallam and H.A. Salim, 2020. Field-testing and numerical simulation of vantage steel bridge. J. Civ. Struct. Health Monit., 10: 443-456.
CrossRef  |  Direct Link  |  
Elakhras, A.A., M.H. Seleem and H.E.M. Sallam, 2021. Intrinsic fracture toughness of fiber reinforced and functionally graded concretes: an innovative approach. Eng. Fracture Mech., Vol. 258. 10.1016/j.engfracmech.2021.108098.
CrossRef  |  Direct Link  |  
Fayed, A.S., A.A Abd-Alhady, H.S. Sherbini and H.E.M. Sallam, 2008. Crack path in steel fiber reinforced concrete composite under mixed mode. Ain Shams J. Civil Eng., 1: 17-26.
Fayed, A.S., H.E.M. Sallam and I.G. El-Batanony, 2004. Crack tip plasticity and the effect of stress ratio on early notch fatigue crack growth rates. Al-Azhar Univ. Eng. J., 7: 141-152.
Hammouda, M.I., M.H. Seleem, H.E.M. Sallam and S.E. Ahmad, 1997. Front development of a long fatigue crack during its growth. Fatigue Fracture Eng. Mater. Structures, 20: 849-862.
CrossRef  |  Direct Link  |  
Hammouda, M.M.I. and H.E.M. Sallam, 1994. The influence of notch plasticity on short fatigue beehaviour. Fatigue Fracture Eng. Mater. Structures, 17: 235-242.
Hammouda, M.M.I., A.S. Fayed and H.E.M. Sallam, 2002. Mode II stress intensity factors for central slant cracks with frictional surfaces in uniaxially compressed plates. Int. J. Fatigue, 24: 1213-1222.
CrossRef  |  Direct Link  |  
Hammouda, M.M.I., A.S. Fayed and H.E.M. Sallam, 2003. Simulation of mixed mode I/II cyclic deformation at the tip of a short kinked inclined crack with frictional surfaces. Int. J. Fatigue, 25: 743-753.
CrossRef  |  Direct Link  |  
Hammouda, M.M.I., A.S. Fayed and H.E.M. Sallam, 2003. Stress intensity factors of a shortly kinked slant central crack with frictional surfaces in uniaxially loaded plates. Int. J. Fatigue, 25: 283-298.
CrossRef  |  Direct Link  |  
Hammouda, M.M.I., A.S. Fayed and H.E.M. Sallam, 2004. Stress intensity factors of a central slant crack with frictional surfaces in plates with biaxial loading. Int. J. Fracture, 129: 141-148.
CrossRef  |  Direct Link  |  
Hammouda, M.M.I., A.S. Fayed, H.E.M. Sallam, I.G. El-Batanony and M.H. Ata, 2008. First crack initiation angle of central slant crack in plates under compression-tension biaxial loading. J. Al Azhar Univ. Eng. Sector, 3: 13-26.
Direct Link  |  
Hammouda, M.M.I., H.E.M. Sallam and H.G. Osman, 2004. Significance of crack tip plasticity to early notch fatigue crack growth. Int. J. Fatigue, 26: 173-182.
CrossRef  |  Direct Link  |  
Hammouda, M.M.I., H.G. Osman and H.E.M. Sallam, 2004. Mode I notch fatigue crack growth behaviour under constant amplitude loading and due to the application of a single tensile overload. Int. J. Fatigue, 26: 183-192.
CrossRef  |  Direct Link  |  
Hammouda, M.M.I., I. El-Batanony and H.E.M. Sallam, 2003. Finite element simulation of the mechanics of flat fretting fatigue tests. Fatigue Fracture Eng. Mater. Struct., 26: 627-639.
CrossRef  |  Direct Link  |  
Hammouda, M.M.I., M.H. Seleem and H.E.M. Sallam, 2001. Deformation at the tip of a crack emanating from the root of some notches. J. Eng. Applied Sci., 48: 173-185.
Hammouda, M.M.I., M.H. Seleem, H.E.M. Sallam and S.S.E. Ahmad, 1997. Simulation of closure during front development of a fatigue crack. AMEIC., 1: 111-111.
Hammouda, M.M.I., S.E. Ahmad, A.S. Sherbiniand H.E.M. Sallam, 1999. Deformation behaviour at the tip of physically short fatigue crack due to a single overload. Fatigue Fracture Eng. Mater. Struct., 22: 145-151.
Direct Link  |  
Hammouda, M.M.I., S.E. Ahmad, M.H. Seleem and H.E.M. Sallam, 1998. Fatigue crack growth due to two successive single overloads. Fatigue Fracture Eng. Mater. Struct., 21: 1537-1547.
Direct Link  |  
Hammouda, M.M.I., S.S.E.Ahmad and H.E.M. Sallam, 1995. Correlation of fatigue crack growth by crack tip deformation behaviour. Fatigue Fracture Eng. Mater. Structures, 18: 93-104.
CrossRef  |  Direct Link  |  
Hashemi, H.N., H.E.M. Sallam and K. Lee, 1997. Effect of fiber orientation on friction and wear resistance of Cu-18 vol.% Nb (P/M) composite Al-Azhar Uni. Cairo, 7: 242-252.
Khalil, H.S., A.A. Nowar, A.M. Saba, A.S. Sherbini and H.M. Sallam, 2008. Effect of fiber type on the mechanical properties of normal and high strength concrete. ASJCE., 1: 49-62.
Khalil, H.S., A.A. Nowar, A.M. Saba, A.S. Sherbini and H.M. Sallam, 2008. Effect of hybrid fiber type on the mechanical properties of normal and high strength concrete. ASJCE., 1: 115-133.
Khalil, H.S., H.S. Soliman, H.E.M. Sallam and H.H. Shaheen, 2008. Flexural strengthening of reinforced concrete beams using external unbonded steel bars. Eng. Res. J., 31: 407-412.
Direct Link  |  
Khashaba, U.A., H.E.M. Sallam, A.E. Al-Shorbagy and M.A. Seif, 2006. Effect of washer size and tightening torque on the performance of bolted joints in composite structures. Comp. Struct., 73: 310-317.
CrossRef  |  Direct Link  |  
Merwad, A., S. Abu-Barakat and A. Al-Sisi, 2020. Transverse impact on hollow and concrete filled steel tubular members. Egypt. J. Eng. Sci. Technol., 32: 49-58.
CrossRef  |  Direct Link  |  
Moawad, M., M. Baena, C. Barris, L. Torres and H.E.M. Sallam, 2021. Time-dependent behavior of NSM strengthened RC beams under sustained loading. Eng. Struct., Vol. 247. 10.1016/j.engstruct.2021.113210.
CrossRef  |  Direct Link  |  
Mousa, S., A.A. Abd-Elhady, A. Abu-Sinna, T. Enab, W.H. Alhazmi and H. Sallam, 2019. Mixed mode crack growth in functionally graded material under three-point bending. Procedia Struct. Integrity, 17: 284-291.
CrossRef  |  Direct Link  |  
Mousa, S., A.A. Abd-Elhady, G. Y Kim and H.E.D.M. Sallam, 2018. Fracture behavior of roll bonded Al-brass-Al multilayer composites–concept of the maximum undamaged defect size (dmax). Procedia Struct. Integr., 13: 686-693.
CrossRef  |  Direct Link  |  
Mousa, S., H.E.D.M. Sallam and A.A. Abd-Elhady, 2021. Mechanical properties of Al/PU/perforated CU/PU/Al sandwich composites. Mater. Res., Vol. 24. 10.1590/1980-5373-mr-2021-0104.
CrossRef  |  Direct Link  |  
Mousa, S., H.E.D.M. Sallam, G.Y. Kim and A.A. Abd-Elhady, 2021. Investigation on integrity assessment tests of wrb metal-polymer-metal composites. Arch. Civ. Mech. Eng., Vol. 21. 10.1007/s43452-021-00216-4.
CrossRef  |  Direct Link  |  
Mousa, S., M. Atta, A. A. Abd-Elhady, A. Abu-Sinna, O. Bafakeeh and H. E. M. Sallam 2019. Mechanical and Bond Behavior of an Advanced Quranic Metal-Matrix Composite Material (QMMC) ASME 2019 14th International Manufacturing Science and Engineering Conference. JUne 10-14, 2019. American Society of Mechanical Engineers 1-6.
CrossRef  |  Direct Link  |  
Mubaraki, M. and H. Sallam, 2020. The most effective index for pavement management of urban major roads at a network level. Arabian J. Sci. Eng., 46: 4615-4626.
CrossRef  |  Direct Link  |  
Mubaraki, M. and H.E.M. Sallam, 2018. Reliability study on fracture and fatigue behavior of pavement materials using SCB specimen. Int. J. Pavement Eng., 10.1080/10298436.2018.1555332.
CrossRef  |  Direct Link  |  
Mubaraki, M., A.A. Abd-Elhady and H.E.M. Sallam, 2013. Mixed mode fracture toughness of recycled tire rubber-filled concrete for airfield rigid pavements. Int. J. Pavement Res. Technol., 6: 8-14.
Direct Link  |  
Mubaraki, M., A.A. Abd-Elhady, and H.E.M. Sallam, 2012. Role of pavement age on pavement distress propagation for high volume urban roads. J. Jazan Univ. Appl. Sci. Branch, 2: 13-26.
Direct Link  |  
Mubaraki, M., S.A. Osman and H.E.M. Sallam, 2019. Effect of RAP content on flexural behavior and fracture toughness of flexible pavement. Latin Am. J. Solids Struct., Vol. 16. 10.1590/1679-78255516 .
CrossRef  |  Direct Link  |  
Mubaraki, M.A., A.A. Abd-Elhady, S.A. Osman and H.E.M. Sallam, 2017. Mixed mode fracture behavior of concrete pavement containing RAP-3D finite element analysis. Procedia Struct. Integr., 5: 19-26.
CrossRef  |  Direct Link  |  
Omran, K., M. Ahmed, M. Elmeniawi, H. sallam and S. Naga, 2021. A review on thermal barrier coatings. Egypt. J. Eng. Sci. Technol., 36: 1-6.
CrossRef  |  Direct Link  |  
Othman, M.A., H.M. El-Emam, M.H. Seleem, H.E.M. Sallam and M. Moawad, 2021. Flexural behavior of functionally graded concrete beams with different patterns. Arch. Civ. Mech. Eng., Vol. 21. 10.1007/s43452-021-00317-0.
CrossRef  |  Direct Link  |  
Pacheco, T., H.N. Hashemi and H.E.M. Sallam, 1996. Acoustic emission in a Nextel 440 fiber reinforced 6061 Al composite. J. Acoustic Emission, 14: 85-95.
Direct Link  |  
Pacheco, T., H.N. Hashemi and H.E.M. Sallam, 1997. A comparison of two nextel 440 fiber reinforced aluminium composites using acoustic emission. J. Mater. Sci., 32: 3135-3142.
CrossRef  |  Direct Link  |  
Pacheco, T., H.N. Hashemi and H.E.M. Sallam, 1998. The effects of matrix and fiber properties on the mechanical behavior and acoustic emission in continuous fiber reinforced metal matrix composites. Mater. Sci. Eng. A, 247: 88-96.
CrossRef  |  Direct Link  |  
Reda, R.M., I.A. Sharaky, M. Ghanem, M.H. Seleem and H.E.M. Sallam, 2016. Flexural behavior of RC beams strengthened by NSM GFRP Bars having different end conditions. Compos. Struct., 147: 131-142.
CrossRef  |  Direct Link  |  
Reda, R.M., Z. Omar, H. Sallam and S.S.E. Ahmad, 2020. Effect of different parameters controlling the flexural behavior of RC beams strengthened with NSM using nonlinear finite element analysis. Frattura ed Integrità Strutturale, 14: 106-123.
CrossRef  |  Direct Link  |  
Saba, A.M., H.E.M. Sallam, H.H. Shahin and H. Abdel-Raouf, 2003. Effect of plate end anchorage and side plates on the efficiency of plated beams. Al-Azhar Univ. Eng. J., 6: 555-564.
Sallam, H.E., A.A. Badawy and H.M. El-Emam, 2013. Numerical simulation of the performance of strengthened RC beams using smeared crack approach. J. Jazan Univ. Appl. Sci. Branch, 2: 30-44.
Direct Link  |  
Sallam, H.E.D.M. and A.A. Abd-Elhady, 2013. Crack length-effective stress intensity factor relation in notched semi-circular specimens for different mode of mixity. Res. Applic. Mech. Eng., 2: 120-124.
Direct Link  |  
Sallam, H.E.D.M. and A.A. Abd-Elhady, 2015. Prediction of Crack Initiation Site in Fastener Hole of Composite Laminate. In: Advanced Composites for Aerospace, Marine, and Land Applications II, Sano, T. and T.S. Srivatsan (Eds.). Springer, Cham, ISBN: 978-3-319-48607-9, pp: 187-198.
Sallam, H.E.M. and A.A. Abd-Elhady, 2012. Mixed mode crack initiation and growth in notched semi-circular specimens: Three dimensional finite element analysis. Asian J. Mater. Sci., 4: 34-44.
CrossRef  |  Direct Link  |  
Sallam, H.E.M. and A.A.M. Badawy, 2003.. Stress intensity factors of cracked RC beams strengthened by externally bonded plates. Sci. Bull. Fac. Eng. Ain Shams Univ., 38: 27-42.
Sallam, H.E.M., A.M. Badawy, A.M. Saba and F.A. Mikhail, 2010. Flexural behavior of strengthened steel-concrete composite beams by various plating methods. J. Construct. Steel Res., 66: 1081-1087.
CrossRef  |  Direct Link  |  
Sallam, H.E.M., 1996. Effect of a single peak overload on physically short fatigue crack retardation in an axle-steel. Fatigue Fract. Engng Mater. Struct., 19: 1055-1057.
Sallam, H.E.M., 1996. Effect of a single peak overload on physically short fatigue crack retardation in an axle-steel. Fatigue Fracture Eng. Mater. Structures, 19: 141-385.
Direct Link  |  
Sallam, H.E.M., 1997. Discussion on Effect of rest time after application of single overload cycle on fatigue life. Eng. Fract. Mech., 56: 841-842.
CrossRef  |  Direct Link  |  
Sallam, H.E.M., 1997. The effect of specimen geometry on crack tip deformation and fatigue crack closure. Civ. Eng., 3: 271-278.
Sallam, H.E.M., 2001. Discussion: The effect of alkali-silica-reaction on the fatigue behaviour of plain concrete tested in compression, indirect tension and flexure. Mag. Concrete Res., 53: 353-355.
CrossRef  |  Direct Link  |  
Sallam, H.E.M., 2003. Fracture energy of fiber reinforced concrete. Al-Azhar Univ. Eng. J., 6: 555-564.
Sallam, H.E.M., 2010. Discussion of Flexural strengthening of steel bridges with high modulus CFRP strips. J. Bridge Eng., 15: 117-118.
CrossRef  |  Direct Link  |  
Sallam, H.E.M., A.A.M. Badawy, A.M. Saba and F.A. Mikhail, 2010. Assessment of strengthened steel-concrete composite beams by different techniques. Egypt. Int. J. Eng. Sci. Technol., 13: 1-10.
Direct Link  |  
Sallam, H.E.M., A.A.M. Badawy, M.M. Balaha, H.S. Khalil and H.M. El-Emam, 2009. Finite element analysis of peeling failure in strengthened RC beams by CFRP plates. Egypt. Int. J. Eng. Sci. Technol., 12: 25-36.
Direct Link  |  
Sallam, H.E.M., A.E.A. El-Sisi, E.B. Matar and O. El-Hussaini, 2011. Effect of clamping force and friction coefficient on stress intensity factor of cracked lapped joints. Eng. Fail. Anal., 18: 1550-1558.
CrossRef  |  Direct Link  |  
Sallam, H.E.M., A.M. Saba, H.H. Shaheen and H. Abdel-Raouf, 2004. Prevention of peeling failure in plated beams. J. Adv. Concrete Technol., 2: 419-429.
CrossRef  |  Direct Link  |  
Sallam, H.E.M., A.M. Saba, W. Mamdouh, H. Maaly and I. Ibrahim, 2005. Strengthening of steel beams using bonded CFRP and steel plates: A pilot study. Al-Azhar Univ. Eng. J., 8: 23-29.
Sallam, H.E.M., A.S. Sherbini, M.H. Seleem and M.M. Balaha, 2008. Impact resistance of rubberized concrete. Eng. Res. J., 31: 265-271.
Direct Link  |  
Sallam, H.E.M., E.B. Matar, A.E.A. El-Sisi and O. El-Hussaini, 2010. Early growth behavior of short crack emanating from riveted/bolted steel connections. Egypt. Int. J. Eng. Sci. Technol., 13: 11-20.
Sallam, H.E.M., I.G. El-Batanony and S.A.A. Sayed, 2008. Fatigue strength of unidirectional CFRP plates containing a circular hole. J. Al Azhar Univ. Eng. Sector, 3: 417-425.
Sallam, H.E.M., K. Abd El-Aziz, H. Abd El-Raouf and E.M. Elbanna, 2013. Failure analysis and flexural behavior of high chromium white cast iron and AISI4140 Steel bimetal beams. Mater. Des., 52: 974-980.
CrossRef  |  Direct Link  |  
Sallam, H.E.M., K.A. El-Aziz, H.A. El-Raouf and E.M. Elbanna, 2013. Flexural strength and toughness of austenitic stainless steel reinforced high-Cr white cast iron composite. J. Mater. Eng. Perform., 22: 3769-3777.
CrossRef  |  Direct Link  |  
Sallam, H.E.M., M.A. Hassan, A.A. Sadek, and U. Amin, 2010. Effect of shielding gas composition on the mechanical properties and corrosion resistance of aisi 321 stainless steel welds using gmaw process. Egypt. Int. J. Eng. Sci. Technol., 13: 30-40.
Direct Link  |  
Sallam, H.E.M., M.A. Mubaraki and I.Y. Nur, 2014. Application of the maximum undamaged defect size (dmax) concept in fiber-reinforced concrete pavements. Arab J. Sci. Eng., 39: 8499-8506.
CrossRef  |  Direct Link  |  
Sallam, H.E.M., M.H. Seleem and I.A. Sharaky, 2008. Failure analysis of strengthened steel I-beams by bonded CFRP plates. Mansoura Eng. J., 33: C.48-C.65.
Sallam, H.E.M., S.S.E. Ahmad, A.A.M. Badawy and W. Mamdouh, 2006. Evaluation of steel I-beams strengthened by various plating methods. Adv. Struct. Eng., 9: 535-544.
CrossRef  |  Direct Link  |  
Sallam, H.E.M., T.A. Ghareib, M.M. Hussein and A.S. Mahdy, 2010. Flexural and shear behavior of hybrid fiber-reinforced self-compacting concrete beams. Egypt. Int. J. Eng. Sci. Technol., 13: 20-29.
Seleem, M.H., A.M. Saba, H.E.M. Sallam and I.A. Sharaky, 2010. Assessment of adhesively bonded joints in repairing and joining steel plates. ASJCE, 1: 1-8.
Seleem, M.H., H.E.M. Sallam and I.A. Sharaky, 2009. A numerical investigation on the flexural efficiency of steel beams strengthened by different lengths of CFRP plates. Faculty Eng. Ain Shams Univ., Cairo, 2: 179-193.
Seleem, M.H., I.A. Sharakyand H.E.M. Sallam, 2010. Flexural behavior of steel beams strengthened by carbon fiber reinforced polymer plates-three dimensional finite element simulation. Mater. Des., 31: 1317-1324.
CrossRef  |  Direct Link  |  
Seleem, M.H., S.S.E. Ahmed, H.E.M. Sallam, S.B. Moshref and M.A. Haroun, 2007. Fatigue crack growth behavior under variable amplitude loading. J. Eng. Applied Sci., 54: 579-598.
Sharaky, I.A., L. Torres and H.E.M. Sallam, 2015. Experimental and analytical investigation into the flexural performance of RC beams with partially and fully bonded NSM FRP bars/strips. Compos. Struct., 122: 113-126.
CrossRef  |  Direct Link  |  
Sharaky, I.A., M. Baena, C. Barris, H.E.M. Sallam and L. Torres, 2018. Effect of axial stiffness of NSM FRP reinforcement and concrete cover confinement on flexural behaviour of strengthened RC beams: Experimental and numerical study. Eng. Struct., 173: 987-1001.
CrossRef  |  Direct Link  |  
Sharaky, I.A., R.M. Reda, M. Ghanem, M.H. Seleem and H.E.M. Sallam, 2016. Strengthening of RC beams with improved side Near Surface Mounted GFRP techniques. Al Azhar Univ. Civil Eng. Res. Mag., 38: 101-113.
Sharaky, I.A., R.M. Reda, M. Ghanem, M.H. Seleem and H.E.M. Sallam, 2017. Experimental and numerical study of RC beams strengthened with bottom and side NSM GFRP bars having different end conditions. Constr. Build. Mater., 149: 882-903.
CrossRef  |  Direct Link  |  
Sharaky, I.A., S.A.I. Selmy, M.M. El-Attar and H.E.M. Sallam, 2020. The influence of interaction between NSM and internal reinforcements on the structural behavior of upgrading RC beams. Composite Struct., Vol. 234. 10.1016/j.compstruct.2019.111751.
CrossRef  |  Direct Link  |  
Wang, H.T., G. Wu and J.B. Jiang, 2015. Fatigue behavior of cracked steel plates strengthened with different CFRP systems and configurations. J. Composites Const., Vol. 20. .
Direct Link  |  

 
 
 
 
 
 
 
 
 
 
     
  Google Scholar
     
  Asian Digital Library