Asian Science Citation Index is committed to provide an authoritative, trusted and significant information by the coverage of the most important and influential journals to meet the needs of the global scientific community.  
ASCI Database
308-Lasani Town,
Sargodha Road,
Faisalabad, Pakistan
Fax: +92-41-8815544
Contact Via Web
Suggest a Journal
 
Articles by S. Dyuti
Total Records ( 2 ) for S. Dyuti
  S. Dyuti , S. Mridha and S. K. Shaha
  Problem statement: There is an increasing demand for claddings which possess an optimized combination of different functional properties such as high hardness, high resistance to wear and oxidation. In this respect, hard TiAlN cladding has gained much attention. These claddings can be suitable replacements for the conventional ceramic coatings applied in many components of chemical plants and automotive industries to protect against high temperature oxidation and wear. Approach: In this study the possibility of the formation of intermetallic and nitride claddings on plain carbon steel surfaces by in situ melting of preplaced titanium and aluminum powder mixture under Tungsten Inert Gas (TIG) torch had been investigated. Results: Addition of 1.3 and 1.8 mg mm-2 Ti and Al powder and melting at energy inputs between 540-675 J mm-1 in nitrogen environment successfully created more than 1 mm thick clad layer consisting of a mixture of titanium-aluminum nitrides and aluminides. All resolidified melt layers produced dendrite microstructures; the dendrite concentration is more near the surface area compared to the deeper melt depth. A maximum surface hardness of around 900 Hv was developed in most of the tracks and this hardness corresponds to high concentration of dendrites within the modified layer. Oxidation at 600°C for 72 h, of the clad steel gave weight gains of 0.13 mg mm-2, compared to 0.37 mg mm-2 for the substrate. Conclusion: The results showed that clad steel gave better mechanical and oxidation properties compared to plain carbon steel substrate.
  S.K. Shaha , S. Dyuti , M.M. Haque and M.A. Maleque
  Fe-C-Al alloy system spheroidal graphite cast iron has enormous benefits such as higher strength and hardness, better wear and oxidation resistance etc. at room temperature as well as high temperature. However, its application is not still being popularized due to the production difficulties. In this investigation, a special type of design was developed to perform the magnesium (Mg) treatment in the melt. The raw materials were melted in an induction furnace and later liquid metal was treated using pure Mg foil for spherodization in special crucible. The microstructural study was performed using Scanning Electron Microscope (SEM). The chemical analysis shows a great breakthrough in Mg recovery of Fe-C-Al alloy system spheroidal graphite cast iron. It is also shown that the mechanical properties such as hardness, tensile strength and ductility are comparable to the previous research work.
 
 
 
Copyright   |   Desclaimer   |    Privacy Policy   |   Browsers   |   Accessibility