Asian Science Citation Index is committed to provide an authoritative, trusted and significant information by the coverage of the most important and influential journals to meet the needs of the global scientific community.  
ASCI Database
308-Lasani Town,
Sargodha Road,
Faisalabad, Pakistan
Fax: +92-41-8815544
Contact Via Web
Suggest a Journal
 
Articles by Peter C. Raynor
Total Records ( 3 ) for Peter C. Raynor
  Seung Won Kim and Peter C. Raynor
  This study reports the results of a numerical investigation and an experimental study on a round nozzle virtual impactor (VI) operated in two different modes. The newly proposed sampler, the semivolatile aerosol dichotomous sampler (SADS), was studied to overcome some of the problems of existing personal sampling methods such as evaporative loss during filter sampling. The main difference between VIs and the SADS was the inverted flow ratio between the major flow and the minor flow. Sampling in the SADS settings gives a lower cutsize in both numerical simulations and experimental results. Whereas the 50% separation efficiency for a VI occurred in numerical simulations when the square root of Stokes number equaled 0.97, the 50% efficiency for the same sampler run in the SADS settings occurred when the square root of the Stokes number was 0.27. The back pressure on each flow direction was studied and greater pressure drop was observed through the vapor flow in SADS settings. Sampling using a SADS was more effective than traditional filter methods because of its smaller cutsize, instant separation of vapor from particles and reduced particle losses.
  David R. Liverseed , Perry W. Logan , Carl E. Johnson , Sandy Z. Morey and Peter C. Raynor
  Conventional abrasive sanding generates high concentrations of particles. Depending on the substrate being abraded and exposure duration, overexposure to the particles can cause negative health effects ranging from respiratory irritation to cancer. The goal of this study was to understand the differences in particle emissions between a conventional random orbital sanding system and a self-generated vacuum random orbital sanding system with attached particle filtration bag. Particle concentrations were sampled for each system in a controlled test chamber for oak wood, chromate painted (hexavalent chromium) steel panels, and gel-coated (titanium dioxide) fiberglass panels using a Gesamtstaub-Probenahmesystem (GSP) sampler at three different locations adjacent to the sanding. Elevated concentrations were reported for all particles in the samples collected during conventional sanding. The geometric mean concentration ratios for the three substrates ranged from 320 to 4640 times greater for the conventional sanding system than the self-generated vacuum sanding system. The differences in the particle concentration generated by the two sanding systems were statistically significant with the two sample t-test (P < 0.0001) for all three substances. The data suggest that workers using conventional sanding systems could utilize the self-generated vacuum sanding system technology to potentially reduce exposure to particles and mitigate negative health effects.
  Jooyeon Hwang , Gurumurthy Ramachandran , Peter C. Raynor , Bruce H. Alexander and Jeffrey H. Mandel
  Since the 1970s, concerns have been raised about elevated rates of mesothelioma in the vicinity of the taconite mines in the Mesabi Iron Range. However, insufficient quantitative exposure data have hampered investigations of the relationship between cumulative exposures to elongate mineral particles (EMP) in taconite dust and adverse health effects. Specifically, no research on exposure to taconite dust, which includes EMP, has been conducted since 1990. This article describes a comprehensive assessment of present-day exposures to total and amphibole EMP in the taconite mining industry. Similar exposure groups (SEGs) were established to assess present-day exposure levels and buttress the sparse historical data. Personal samples were collected to assess the present-day levels of worker exposures to EMP at six mines in the Mesabi Iron Range. The samples were analyzed using National Institute for Occupational Safety and Health (NIOSH) methods 7400 and 7402. For many SEGs in several mines, the exposure levels of total EMP were higher than the NIOSH Recommended Exposure Limit (REL). However, the total EMP classification includes not only the asbestiform EMP and their non-asbestiform mineral analogs but also other minerals because the NIOSH 7400 cannot differentiate between these. The concentrations of amphibole EMP were well controlled across all mines and were much lower than the concentrations of total EMP, indicating that amphibole EMP are not major components of taconite EMP. The levels are also well below the NIOSH REL of 0.1 EMP cc-1. Two different approaches were used to evaluate the variability of exposure between SEGs, between workers, and within workers. The related constructs of contrast and homogeneity were calculated to characterize the SEGs. Contrast, which is a ratio of between-SEG variability to the sum of between-SEG and between-worker variability, provides an overall measure of whether there are distinctions between the SEGs. Homogeneity, which is the ratio of the within-worker variance component to the sum of the between-worker and within-worker variance components, provides an overall measure of how similar exposures are for workers within an SEG. Using these constructs, it was determined that the SEGs are formed well enough when grouped by mine for both total and amphibole EMP to be used for epidemiological analysis.
 
 
 
Copyright   |   Desclaimer   |    Privacy Policy   |   Browsers   |   Accessibility