Asian Science Citation Index is committed to provide an authoritative, trusted and significant information by the coverage of the most important and influential journals to meet the needs of the global scientific community.  
ASCI Database
308-Lasani Town,
Sargodha Road,
Faisalabad, Pakistan
Fax: +92-41-8815544
Contact Via Web
Suggest a Journal
 
Articles by Md. Iftekhar Shams
Total Records ( 2 ) for Md. Iftekhar Shams
  Atanu Kumar Das , Md. Azharul Islam , Md. Iftekhar Shams , Md. Obaidullah Hannan and Subir Kumar Biswas
  This study summarizes the results of Medium Density Fiberboard (MDF) made from bagasse using urea formaldehyde as a binder agent and without binding agent. Important physical and mechanical properties were examined. The density of MDF bagasse with binding agent and without binding agent was respectively 0.90 and 0.87 g cm-3. The Modulus of Rupture (MOR) of MDF bagasse with binding agent and without binding agent was 44.98 and 34.94 N mm-2 respectively. The Modulus of Elasticity (MOE) was 3532.34 and 3454.28 N mm-2 respectively for UF bonded bagasse MDF and without binding agent bagasse MDF. Board with addition of binding agent showed higher performance than that of without binding agent board for both physical and mechanical properties. But both kind of board followed the standard and also showed better quality than that of the previous studies. There is a possibility of using MDF of bagasse for both types as a substitute of MDF made from other agricultural residues.
  Atanu Kumar Das , Lakshmi Rani Mondal and Md. Iftekhar Shams
  This study was under taken to identify the physical and mechanical properties of kenaf (Hibiscus cannabinus) MDF and to evaluate the potential of kenaf MDF in Bangladesh. Properties were compared with market MDF in Bangladesh. Physical and mechanical properties were examined. The density of kenaf MDF and market MDF were respectively, 0.73 and 0.72 g cm-3. The MOR of kenaf and market MDF was 44.97 and 40.65 N mm-2, respectively. The MOE for kenaf and market MDF was 3786 and 3518 N mm-2, respectively. The physical and mechanical properties of kenaf MDF were better than market MDF. The kenaf MDF followed the standard and it can be a good source of raw material for MDF industries.
 
 
 
Copyright   |   Desclaimer   |    Privacy Policy   |   Browsers   |   Accessibility