Asian Science Citation Index is committed to provide an authoritative, trusted and significant information by the coverage of the most important and influential journals to meet the needs of the global scientific community.  
ASCI Database
308-Lasani Town,
Sargodha Road,
Faisalabad, Pakistan
Fax: +92-41-8815544
Contact Via Web
Suggest a Journal
 
Articles by K. Heidarbeigi
Total Records ( 2 ) for K. Heidarbeigi
  K. Heidarbeigi , H. Ahmadi , K. Kheiralipour and A. Tabatabaeefar
  Khinjuk is oiling crop; therefore, physical and engineering properties are necessitate to determine for processing and equipment design. In this study, some raw material characteristics were determined for Khinjuk, in order to collect information about identifying some physical and mechanical properties of them. The average grain length, width and thickness were 5.49, 5.09 and 4.08 mm, respectively. The geometric mean diameter, thousand grain kernel and aspect ratio were 5.02 mm, 87.15g and 0.95, respectively. True density, bulk density and porosity were 1.01 kg m-3, 0.55 kg m-3 and 45 %, respectively while the static coefficient of friction varied from 0.45 on plywood surface to 0.56 on galvanized iron. The angle of repose for static and emptying were 48.33 and 23.74o degree, respectively. Whereas the failure force and elongation were 42.49 N and 1.35 mm respectively.
  M. Karimi , K. Kheiralipour , A. Tabatabaeefar , G.M. Khoubakht , M. Naderi and K. Heidarbeigi
  Physical properties often required for designing the equipments for planting, harvesting and postharvesting operations of seeds. Several physical properties of three popular wheat varieties (Shiraz, Karoun and Shiroudy) were determined and compared for moisture content in 8, 12 and 18% w.b in 2007 in University of Tehran. The average length, width and thickness were 6.75, 3.26 and 2.77 mm at a moisture content of 8% w.b., respectively. studies on rewetted wheat seeds showed that the thousand-kernel weight increased from 18.38 to 22.43g. The geometric and equivalent mean diameter, surface area, sphericity and aspect ratio at a moisture content of 8% w.b were 3.93, 3.94 mm, 48.68 mm2, 0.58, 0.48, respectively. The porosity increased from 0.43 to 0.45 %. Whereas the bulk density decreased from 0.72 to 0.66kg m-3 and the true density from 1.25 to 1.19 kg m-3, with an increasing in the moisture content range of 8B18% w.b. The static and dynamic angle of repose varied from 37.28 to 47.33 and 29.89 to 36.5o. The mean of static friction coefficient of three wheat varieties increased the linearly against surfaces of three structural materials, namely, compressed plastic (0.43 - 0.53), galvanized iron (0.33 - 0.53) and plywood (0.35 - 0.41) as the moisture content increased from 8 to 18% w.b.
 
 
 
Copyright   |   Desclaimer   |    Privacy Policy   |   Browsers   |   Accessibility