Asian Science Citation Index is committed to provide an authoritative, trusted and significant information by the coverage of the most important and influential journals to meet the needs of the global scientific community.  
ASCI Database
308-Lasani Town,
Sargodha Road,
Faisalabad, Pakistan
Fax: +92-41-8815544
Contact Via Web
Suggest a Journal
 
Articles by Cengiz GULER
Total Records ( 3 ) for Cengiz GULER
  Cengiz Guler , Yalcin Copur , Mehmet Akgul and Umit Buyuksari
  The aim of this study was to determine some chemical, physical and mechanical properties of juvenile wood from black pine (Pinus nigra Arnold) plantations. Black pine, one of the important softwood species covers the most of the plantations in Turkey. Black pines that naturally grow in Duzce were 20-23 years old with the dimensions of 13-17 cm utilized in this study. Specimens were prepared and tested according to Turkish standards. The physical properties were measured and air and oven dry wood densities were found to be 0.464 and 0.431 g cm–3, respectively. The volume weight was 0.383 g cm–3. The radial, tangential and volumetric shrinkage values were 4.05, 6.19 and 10.24%, respectively. The radial, tangential and volumetric swelling values were also found to be 3.69, 7.79 and 11.5%, respectively. The mechanical tests resulted in that the static bending and compression strengths were 79.1 and 42.4 N mm–2, respectively. In addition juvenile wood had higher lignin and lower holocellulose content compared to the mature wood. Conclusively, the physical and mechanical properties of juvenile pine wood examined in this study were observed to be lower compared to the mature pine wood.
  Mehmet Akgul , Yalcin Copur , Cengiz Guler , Ayhan Tozluoglu and Umit Buyuksari
  The objective of this study was to investigate the suitability of oak (Ouercus robur L.) wood fibers from Turkey as a raw material for medium density fiberboard. In this study, some of the oak wood parts that are especially not suitable for other forest industries was utilized to produce fiberboards in laboratory environment. Test panels of varying densities (0.6, 0.7 and 0.8 g cm-3) were produced at 18 mm thickness using urea-formaldehyde adhesive. Mechanical, water resistance and dimensional stability properties of the test panels were determined according to Turkish standards. The results indicated that laboratory MDF panels produced using oak fibers resulted in mechanical properties that exceed (except panel type A) levels specified in the appropriate existing standards for the general propose fiberboards.
  Mehmet AKGUL , Cengiz GULER and Yalcın COPUR
  Corn stalk is a renewable natural resource that currently has limited industrial utilization. The objective of this study was to examine some chemical properties of corn stalk (holocellulose, α-cellulose, lignin and ash content, alcohol-benzene, hot and cold water solubility, and solubility in dilute alkali [1% NaOH]) and to evaluate its suitability for medium-density fiberboard (MDF) production. Panels were produced using mixtures of corn stalk (Zea mays indurata Sturt.) and pine (Turkish Pinus nigra) fibers in various proportions (from 0% to 100%). The panels produced had density levels of 0.6, 0.7, and 0.8 g cm-3. The physical and mechanical properties of the manufactured panels were tested. Chemical analysis shows that the holocellulose, α-cellulose, and lignin content of corn stalk was similar to that of wood and some other crop residues. The ash content of corn stalk was higher than that of soft- and hardwoods. Mechanical test results indicate that the panels produced utilizing solely corn stalk met the required standards, except the panels with a density of 0.6 g cm-3. Increasing the pine fiber ratio in the panel mixture improved panel properties.
 
 
 
Copyright   |   Desclaimer   |    Privacy Policy   |   Browsers   |   Accessibility