Asian Science Citation Index is committed to provide an authoritative, trusted and significant information by the coverage of the most important and influential journals to meet the needs of the global scientific community.  
ASCI Database
308-Lasani Town,
Sargodha Road,
Faisalabad, Pakistan
Fax: +92-41-8815544
Contact Via Web
Suggest a Journal
Articles by A.T.Z. Mahamat
Total Records ( 1 ) for A.T.Z. Mahamat
  A.T.Z. Mahamat , A.M.A. Rani and Patthi Husain
  In this study, we investigate the possibility of machining cemented tungsten carbide WC+6% Co by using copper. Tungsten carbide is hard and brittle with low thermal conductivity and low thermal expansion. The high resistant to abrasive wear and high melting point are the main reason for the selection of these materials for large number of applications such as machining tool and die material. The hardness of WC+Co primarily depends on the average grain size and cobalt content. The difficulty when machining cemented tungsten carbide comes from the thermal stress. The micro cracks enlarge, which leads to macro crack and fragmentation. This can be referred to the low thermal expansion, thermal conductivity and brittleness, which create a high thermal stress. Generally, cooling and removal of the cracked particles are difficult. In order to develop the optimal machining process for the desirable machining response, L9 Taguchi Orthogonal Array (OA) were used. This orthogonal array is used for optimization of the following variables; Peak-Current (IP), pulse ON-Time (ON), pulse OFF-Time (OFF) and Gap-Voltage (GAP). The results show that it’s possible to EDMing WC-Co using copper electrode at very low energy setting but at the expense of material removal rate MRR.
Copyright   |   Desclaimer   |    Privacy Policy   |   Browsers   |   Accessibility