Review on the Enhancement Techniques and Introduction of an Alternate Enhancement Technique of Solar Chimney Power Plant
Aja Ogboo Chikere, Hussain H. Al-Kayiem and Zainal Ambri Abdul Karim
Journal of Applied Sciences Volume 11, Number 11, 1877-1884, 2011
Abstract PDF Fulltext Citations XML References
Generating Gas Turbine Component Maps Relying on Partially Known Overall System Characteristics
A.L. Tamiru, F.M. Hashim and C. Rangkuti
Journal of Applied Sciences Volume 11, Number 11, 1885-1894, 2011
Abstract PDF Fulltext Citations XML References
Ocean Wave Properties of Terengganu for Renewable Energy Potential
A.M. Muzathik, W.B. Wan Nik, M.F. Ahmad, M.Z. Ibrahim, A.H. Sharuddin and K.B. Samo
Journal of Applied Sciences Volume 11, Number 11, 1895-1903, 2011
Abstract PDF Fulltext Citations XML References
PICA: Pipeline Integrated Corrosion Assessment Tool for Structure Integrity
N.M. Noor, N.A.N. Ozman, N. Yahaya and M.M. Din
Journal of Applied Sciences Volume 11, Number 11, 1904-1912, 2011
Abstract PDF Fulltext Citations XML References
A Simulation Study of Downdraft Gasification of Oil-Palm Fronds using ASPEN PLUS
Samson Mekbib Atnaw, Shaharin Anwar Sulaiman and Suzana Yusup
Journal of Applied Sciences Volume 11, Number 11, 1913-1920, 2011
Abstract PDF Fulltext Citations XML References
Evaluation of Heat and Mass Transfer Coefficients for R134a/DMF Bubble Absorber
Journal of Applied Sciences Volume 11, Number 11, 1921-1928, 2011
Abstract PDF Fulltext Citations XML References
Design of a Biomass Burner/Gas-to-gas Heat Exchanger for Thermal Backup of a Solar Dryer
Y.M. Yunus, H.H. Al-Kayiem and K.A.K. Albaharin
Journal of Applied Sciences Volume 11, Number 11, 1929-1936, 2011
Abstract PDF Fulltext Citations XML References
Problem Analysis at a Semiconductor Company: A Case Study on IC Packages
K.A.Z. Abidin, K.C. Lee, I. Ibrahim and A. Zainudin
Journal of Applied Sciences Volume 11, Number 11, 1937-1944, 2011
Abstract PDF Fulltext Citations XML References
A Multi-state Reliability Model for a Gas Fueled Cogenerated Power Plant
Meseret Nasir Reshid and Mohd Amin Abd Majid
Journal of Applied Sciences Volume 11, Number 11, 1945-1951, 2011
Abstract PDF Fulltext Citations XML References
Effect of the Moments of Probability Density Function for Non-uniform Air Flow Distribution on the Hydraulic Performance of a Fin-tube Heat Exchanger
Wai Meng Chin and Vijay R. Raghavan
Journal of Applied Sciences Volume 11, Number 11, 1952-1958, 2011
Abstract PDF Fulltext Citations XML References
Experience on Friction Stir Welding and Friction Stir Spot Welding at Universiti Teknologi Petronas
M. Awang, I.M. Ahmat and P. Hussain
Journal of Applied Sciences Volume 11, Number 11, 1959-1965, 2011
Abstract PDF Fulltext Citations XML References
Droplet Size Measurement for Liquid Spray using Digital Image Analysis Technique
N. Lad, A. Aroussi and M.F. Muhamad Said
Journal of Applied Sciences Volume 11, Number 11, 1966-1972, 2011
Abstract PDF Fulltext Citations XML References
The Development of Trash Diverter System for Tenom Pangi Hydro Power Station Intake, Sabah
Hazha Bin Abdul Hamid and Mohd. Khairul Zaki Bin Abdullah
Journal of Applied Sciences Volume 11, Number 11, 1973-1979, 2011
Abstract PDF Fulltext Citations XML References
Experimental Studies on a Swirling Fluidized Bed with Annular Distributor
M.F.M. Batcha and V.R. Raghavan
Journal of Applied Sciences Volume 11, Number 11, 1980-1986, 2011
Abstract PDF Fulltext Citations XML References
Trade-off between NOx, Soot and EGR Rates for an IDI Diesel Engine Fuelled with JB5
M. Gomaa, A.J. Alimin and K.A. Kamarudin
Journal of Applied Sciences Volume 11, Number 11, 1987-1993, 2011
Abstract PDF Fulltext Citations XML References
Exergy Based Performance Analysis of a Gas Turbine at Part Load Conditions
Aklilu Tesfamichael Baheta and Syed Ihtsham-Ul-Haq Gilani
Journal of Applied Sciences Volume 11, Number 11, 1994-1999, 2011
Abstract PDF Fulltext Citations XML References
Material Selection in Oil Production Unit in One of Iranian Onshore Project
Abutaleb Kusha, M. Reza Mogadam and Seyed M. Meysam Abutorabi F.
Journal of Applied Sciences Volume 11, Number 11, 2000-2005, 2011
Abstract PDF Fulltext Citations XML References
A Semi-elliptical Crack Modeling and Fracture Constraint on Failure Diagram
Journal of Applied Sciences Volume 11, Number 11, 2006-2011, 2011
Abstract PDF Fulltext Citations XML References
Preliminary Investigation into the use of Solar PV Systems for Residential Application in Bandar Sri Iskandar, Malaysia
F.A. Dimas, S.I. Gillani and M.S. Ans
Journal of Applied Sciences Volume 11, Number 11, 2012-2017, 2011
Abstract PDF Fulltext Citations XML References
Steady State Simulation of a Double-Effect Steam Absorption Chiller
Mojahid Sid Ahmed Mohammed Salih Ahmed and Syed Ihtsham Ul-Haq Gilani
Journal of Applied Sciences Volume 11, Number 11, 2018-2023, 2011
Abstract PDF Fulltext Citations XML References
Analysis of Annual Cooling Energy Requirements for Glazed Academic Buildings
Shaharin A. Sulaiman and Ahmad H. Hassan
Journal of Applied Sciences Volume 11, Number 11, 2024-2029, 2011
Abstract PDF Fulltext Citations XML References
Effect of Exhaust Gas Recirculation on the Dual Fuel Combustion of Gasoline and CNG by Compression Ignition
P. Naveenchandran, Noraz Al-Khairi, Raja Shahzad and A. Rashid A. Aziz
Journal of Applied Sciences Volume 11, Number 11, 2030-2035, 2011
Abstract PDF Fulltext Citations XML References
Reliability and Availability Evaluation for a Multi-state System Subject to Minimal Repair
Masdi Muhammad and M. Amin Abd Majid
Journal of Applied Sciences Volume 11, Number 11, 2036-2041, 2011
Abstract PDF Fulltext Citations XML References
Binder Removal from Powder Injection Molded 316L Stainless Steel
Muhammad Rafi Raza, Faiz Ahmad, M.A. Omar and R.M. German
Journal of Applied Sciences Volume 11, Number 11, 2042-2047, 2011
Abstract PDF Fulltext Citations XML References
Effect of T6 Heat Treatment on the Mechanical Properties of Gravity Die Cast A356 Aluminium Alloy
Journal of Applied Sciences Volume 11, Number 11, 2048-2052, 2011
Abstract PDF Fulltext Citations XML References
Study on the Effect of Surface Finish on Corrosion of Carbon Steel in CO2 Environment
R.B.A. Nor Asma, P.A. Yuli and C.I. Mokhtar
Journal of Applied Sciences Volume 11, Number 11, 2053-2057, 2011
Abstract PDF Fulltext Citations XML References
RCM Analysis of Process Equipment: A Case Study on Heat Exchangers
M.A.A. Majid, M. Muhammad and N.I.Y. Yem
Journal of Applied Sciences Volume 11, Number 11, 2058-2062, 2011
Abstract PDF Fulltext Citations XML References
Probabilistic Reliability Assessment of an Insulated Piping in the Presence of Corrosion Defects
Ainul Akmar Mokhtar and Mokhtar Che Ismail
Journal of Applied Sciences Volume 11, Number 11, 2063-2067, 2011
Abstract PDF Fulltext Citations XML References
Comparative Thermal Analysis of Circular and Profiled Cooling Channels for Injection Mold Tools
K. Altaf, V.R. Raghavan and A.M.A. Rani
Journal of Applied Sciences Volume 11, Number 11, 2068-2071, 2011
Abstract PDF Fulltext Citations XML References
Design of Valveless Micropump using Preliminary Characteristics from Fluid Flow
R. Devarajan, S. Mahendran, Z.A.A. Karim and T. Nagarajan
Journal of Applied Sciences Volume 11, Number 11, 2072-2075, 2011
Abstract PDF Fulltext Citations XML References