Subscribe Now Subscribe Today
Science Alert
Curve Top
Journal of Applied Sciences
  Year: 2014 | Volume: 14 | Issue: 14 | Page No.: 1612-1617
DOI: 10.3923/jas.2014.1612.1617
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

LMS Algorithm Based Fundamental Current Detection for Shunt Hybrid Filter

R. Sriranjani and S. Jayalalitha

An adaptive control technique is used to extract the fundamental current for the active filter. The Shunt Hybrid Filter (SHF) comprises passive filter (resonant filter) and active filter. The passive filter is tuned to suppress dominant harmonics and the active filter is tuned to reduce harmonics and reactive power of the supply mains. The Least mean Square (LMS) algorithm is used for implementing Hysteresis current control. The dc bus voltage is regulated using Proportional-Integral controller which improves the dynamic characteristics of SHF. The Shunt Hybrid filter with the dc bus voltage control is analysed by the MATLAB simulink and the results are compared.
PDF Fulltext XML References Citation Report Citation
  •    Simplified Calculation of Adaptive Hysteresis Current Control To Be Used In Active Power Filter
  •    Effects of High Power Electronics Converters on PLC Signals
  •    Three-phase Single Switch Power Factor Correction Circuit with Harmonic Reduction
  •    Apparent Power Ratio of the Shunt Active Power Filter Under Balanced Power System Voltages
  •    A High Precision Selective Harmonic Compensation Scheme for Active Power Filters
How to cite this article:

R. Sriranjani and S. Jayalalitha, 2014. LMS Algorithm Based Fundamental Current Detection for Shunt Hybrid Filter. Journal of Applied Sciences, 14: 1612-1617.

DOI: 10.3923/jas.2014.1612.1617






Curve Bottom