Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2012 | Volume: 12 | Issue: 23 | Page No.: 2404-2410
DOI: 10.3923/jas.2012.2404.2410
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

The Stress Distribution of Gear Tooth Due to Axial Misalignment Condition

M.R. Lias, T.V.V.L.N. Rao, M. Awang and M.A. Khan

Abstract:
Misalignment in gear dynamics mesh always lead to generate a vibration that causes of un-even dynamic load on transmitting torque to the gear tooth. This type of load is also considered as one of the main criteria on contributing the high stresses happen to the teeth that lead to the fatigue breakage after in some duration of cyclic loading time. This effort of study is made to analyze theoretical forces that create stresses with the effect of axial misalignment to a spur gear in meshing condition. A 3D CAD model of the pinion hobbing gear tooth was created with Autodesk Inventor 2010 and analyzes using ANSYS V13 FEA method. The transmitted dynamic load was calculated with change of misalignment angle proportionally to the theoretical contact area on the tooth face. As a result the stress distribution at the contact region and the tooth root is clearly seen variant with the misalignment angle and the equivalent stress is directly proportional with the misalignment deviation. The values of equivalent stresses and its distribution are change with the changing of deviation angle. The stress concentration is higher at the contact region and the tooth root with augmentation of misalignment angle. The face load factor in align and misalign shows the increasing of the load deviation will cause the factor to increase and probably the major contribution to the vibration of the gear mesh in dynamic condition.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    A Semi-elliptical Crack Modeling and Fracture Constraint on Failure Diagram
  •    Finite Element Based Fatigue Life Prediction of Cylinder Head for Two-Stroke Linear Engine Using Stress-Life Approach
How to cite this article:

M.R. Lias, T.V.V.L.N. Rao, M. Awang and M.A. Khan, 2012. The Stress Distribution of Gear Tooth Due to Axial Misalignment Condition. Journal of Applied Sciences, 12: 2404-2410.

DOI: 10.3923/jas.2012.2404.2410

URL: https://scialert.net/abstract/?doi=jas.2012.2404.2410

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom