Subscribe Now Subscribe Today
Science Alert
Curve Top
Journal of Applied Sciences
  Year: 2011 | Volume: 11 | Issue: 23 | Page No.: 3775-3782
DOI: 10.3923/jas.2011.3775.3782
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Noise Analysis Adjustable Bootstrap Transimpedance and Voltage Feedback Receiver Amplifier

M.F.L. Abdullah and R.J Green

An understanding of the noise is required for a receiver’s performance to be precisely characterized. The amount of noise present in a receiver will be the primary factor that determines the receiver’s sensitivity. In this study, the definition of noise in infrared communication is discussed to demonstrate the effects of receiver noise on performance for adjustable bootstrap transimpedance and voltage feedback receiver amplifier. The noise sources that are commonly found in an optical wireless receiver are then discussed, including noises that are of optical as well as of electrical origin. The equivalent circuit model that will describe the noise performance of the bootstrap transimpedance and voltage feedback amplifier circuit shows, that the input noise current density is flat 380 pV/ from 1 Hz to 10 GHz and starts to increase. The output noise density, shows a flatness of 1.1nV/ from 1 Hz to 80 MHZ when it starts descending according to the capacitor value which adjust the bandwidth. Results also showed that the output noise density remains constant during the bandwidth adjustment process.
PDF Fulltext XML References Citation Report Citation
  •    Embedding a Noise Gate Pedal in an Instrument to Avoid Unwanted Noises
How to cite this article:

M.F.L. Abdullah and R.J Green, 2011. Noise Analysis Adjustable Bootstrap Transimpedance and Voltage Feedback Receiver Amplifier. Journal of Applied Sciences, 11: 3775-3782.

DOI: 10.3923/jas.2011.3775.3782






Curve Bottom