Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2010 | Volume: 10 | Issue: 3 | Page No.: 231-234
DOI: 10.3923/jas.2010.231.234
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Characterization of Texture Surface for Solar Cells

A. Hamel and A. Chibani

Abstract:
There is a significant gap between the textured surface with three successive reflections of new solar cell prototype with an anti-reflective layer and without an anti-reflective layer. This study concerns in particular the photovoltaic parameters such as the spectral response, the absorption coefficient and the generation rate. We have found that we are getting nearer to the ideal values in case we want to take advantage of ray incidence three times with an anti-reflective layer, then we will get good results. We have investigated with an anti-reflective layer and hence, making the penetrating rays rate to reach 90%, leading to the improvement of the spectral response, the absorption coefficient, the generation rate.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Simulation of n1-p2 Microcrystalline Silicon Tunnel Junction with AMPS-1D in a-Si :H/μc-Si :H Tandem Solar Cells
  •    Modelisation of the Incident Solar Rays on the Textured Surface of the Solar Cells
How to cite this article:

A. Hamel and A. Chibani, 2010. Characterization of Texture Surface for Solar Cells. Journal of Applied Sciences, 10: 231-234.

DOI: 10.3923/jas.2010.231.234

URL: https://scialert.net/abstract/?doi=jas.2010.231.234

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom