Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2007 | Volume: 7 | Issue: 5 | Page No.: 663-670
DOI: 10.3923/jas.2007.663.670
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Aerodynamic Analyses of Different Wind Turbine Blade Profiles

Ferhat Kurtulmus, Ali Vardar and Nazmi Izli

Abstract:
For thousands of years mankind is utilizing wind energy. Increasing world population and increasingly reducing oil reserves and resulting requirement for clean, reliable, renewable energy systems intensifies the requirement for wind energy in long term. Nowadays, wind turbines are used for transforming that energy into electrical and mechanical energy. In order to gain from a wind turbine economically in maximum amounts performance data based on blade cross-section characteristics must be found. In the present study angle of attacks for 4 various blade profiles, Re numbers and correlations between lift and drag rates are investigated. Snack 2.0, computer software has been used for the calculation of lift, drag, moment and minimum pressure coefficients. For all evaluated blade profiles and all Re rates in the provided highest sliding rates most convenient angle of attack was determined in the range of 3° and 9°. According to lift-drag correlation in constant drag value as long as Re rate is higher also lift is intensified. Highest drag rates found corresponding to Re 20000.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Steps Towards Mitigation of Air Pollutants as a Key for Sustainable Development I.C
  •    The Design of Vertical Axis Wind Turbine Rotor for Antarctic
How to cite this article:

Ferhat Kurtulmus, Ali Vardar and Nazmi Izli, 2007. Aerodynamic Analyses of Different Wind Turbine Blade Profiles. Journal of Applied Sciences, 7: 663-670.

DOI: 10.3923/jas.2007.663.670

URL: https://scialert.net/abstract/?doi=jas.2007.663.670

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom