Submit Manuscript

International Journal of Dairy Science

Year: 2015 | Volume: 10 | Issue: 4 | Page No.: 160-172
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Article Trend

Total views 1017

Authors

M. Abd El-Aziz

H.F. Haggag

M.M. Kaluoubi

Laila K. Hassan

M.M. El-Sayed

A.F. Sayed

Keywords

The effect of using ethanol precipitated cress seed (CSM) and flaxseed (FSM) mucilages in ice cream manufacture compared with commercial Guar Gum (GG) was studied. Ten treatments of ice cream mixes consisted of 10.0% milk fat, 11.5% MSNF and 15.0% sucrose were prepared. The CSM, FSM and GG were added separately at the rates of 0.025, 0.05 and 0.10% (w/w) to create 9 treatments. The latter batch had no polysaccharides' serve as a control. The results showed that the using of CSM and FSM had no significant effect on pH value, acidity content and surface tension of ice cream mix compared with GG or control mix. Protein load was the highest in ice cream mix containing 0.025% GG and CSM, however, protein load decreased, as GG or CSM concentration increased. The ice cream mix containing 0.025% GG exhibited lowest viscosity, while that containing 0.05% GG exhibited highest viscosity compared with those containing other polysaccharides at the same portion. As addition rate of 0.1%, mix containing FSM was higher than that containing CSM, however, mix containing GG separated into two layers. The overrun was the highest in the frozen ice cream containing 0.025% FSM or CSM but the lowest in that containing 0.05% GG. The decrease in hardness of ice cream was related to the increase in mix viscosity more than the increase in overrun percentage. Finally, addition of 0.025% FSM, CSM or commercial GG was the best percentage to improve the physical and sensorial properties of ice cream.
PDF Fulltext XML References Citation

Leave a Comment

Your email address will not be published. Required fields are marked *